Tactical Rails And Accessories

FEATURES
-KMR Alpha
-10"
-Black
-KeyMod Free Float Handguard
-100% aluminum
-Lightweight and durable. Also featuring a proprietary patent pending mounting, indexing and lock up system that mitigates 12:00 rail movement under heat generated from the barrel nut.
-Handguard alone weighs 6.2 oz
-1.3" Inner Diameter
-1.5" OUTSIDE flat to flat
-Handguard flares forward (towards muzzle end) at the 3 and 9 O'Clock positions approximately 1/4"
-Actual length when measured to flare is 10.5"
-The KMR barrel nut will fit over all mil-spec diameter barrels (max of 1")
-Mounting hardware, 2.4 oz, for a total of 8.6 oz on a 10" rail
-The KMR Alpha is hardcoat anodized for corrosion resistance as well as to maintain a non-reflective finish.
-Includes BCM KeyMod Sling Mount

NOTE: NYLON/POLYMER PICATINNY RAIL SECTIONS ARE FOR NON-LOAD BEARING ACCESSORIES ONLY. ALUMINUM PICATINNY RAIL SECTIONS RECOMMENDED FOR LOAD BEARING. DO NOT EXCEED 20 IN/LBS WHEN SECURING KEYMOD FASTENERS ON POLYMER ACCESSORIES. ALUMINUM PICATINNY RAIL SECTIONS MAY BE TORQUED TO 30 IN/LBS

FEATURES
-KeyMod Picatinny Nylon Rail Section
-5.5"
-Flat Dark Earth
-Rail section is made of Lightweight Impact Resistant Polymer
-Mounting hardware is made of Corrosion Resistant Stainless Steel
-Made to the Mil-Standard 1913 Picatinny Arsenal Specifications
-Features a Snag resistant design, while retaining Mil-Standards specs
-Self-contained assembly, eliminates the possible loss of mounting hardware
-Fits ALL KeyMod interface mounting surfaces

NOTE: NYLON/POLYMER PICATINNY RAIL SECTIONS ARE FOR NON-LOAD BEARING ACCESSORIES ONLY. ALUMINUM PICATINNY RAIL SECTIONS RECOMMENDED FOR LOAD BEARING. DO NOT EXCEED 20 IN/LBS WHEN SECURING KEYMOD FASTENERS ON POLYMER ACCESSORIES. ALUMINUM PICATINNY RAIL SECTIONS MAY BE TORQUED TO 30 IN/LBS

FEATURES
-KeyMod Picatinny Nylon Rail Section
-5.5"
-Black
-Rail section is made of Lightweight Impact Resistant Polymer
-Mounting hardware is made of Corrosion Resistant Stainless Steel
-Made to the Mil-Standard 1913 Picatinny Arsenal Specifications
-Features a Snag resistant design, while retaining Mil-Standards specs
-Self-contained assembly, eliminates the possible loss of mounting hardware
-Fits ALL KeyMod interface mounting surfaces

NOTE: NYLON/POLYMER PICATINNY RAIL SECTIONS ARE FOR NON-LOAD BEARING ACCESSORIES ONLY. ALUMINUM PICATINNY RAIL SECTIONS RECOMMENDED FOR LOAD BEARING. DO NOT EXCEED 20 IN/LBS WHEN SECURING KEYMOD FASTENERS ON POLYMER ACCESSORIES. ALUMINUM PICATINNY RAIL SECTIONS MAY BE TORQUED TO 30 IN/LBS

FEATURES
-KeyMod Picatinny Nylon Rail Section
-4"
-Flat Dark Earth
-Rail section is made of Lightweight Impact Resistant Polymer
-Mounting hardware is made of Corrosion Resistant Stainless Steel
-Made to the Mil-Standard 1913 Picatinny Arsenal Specifications
-Features a Snag resistant design, while retaining Mil-Standards specs
-Self-contained assembly, eliminates the possible loss of mounting hardware
-Fits ALL KeyMod interface mounting surfaces

NOTE: NYLON/POLYMER PICATINNY RAIL SECTIONS ARE FOR NON-LOAD BEARING ACCESSORIES ONLY. ALUMINUM PICATINNY RAIL SECTIONS RECOMMENDED FOR LOAD BEARING. DO NOT EXCEED 20 IN/LBS WHEN SECURING KEYMOD FASTENERS ON POLYMER ACCESSORIES. ALUMINUM PICATINNY RAIL SECTIONS MAY BE TORQUED TO 30 IN/LBS

FEATURES
-KeyMod Picatinny Nylon Rail Section
-3"
-Flat Dark Earth
-Rail section is made of Lightweight Impact Resistant Polymer
-Mounting hardware is made of Corrosion Resistant Stainless Steel
-Made to the Mil-Standard 1913 Picatinny Arsenal Specifications
-Features a Snag resistant design, while retaining Mil-Standards specs
-Self-contained assembly, eliminates the possible loss of mounting hardware
-Fits ALL KeyMod interface mounting surfaces

NOTE: NYLON/POLYMER PICATINNY RAIL SECTIONS ARE FOR NON-LOAD BEARING ACCESSORIES ONLY. ALUMINUM PICATINNY RAIL SECTIONS RECOMMENDED FOR LOAD BEARING. DO NOT EXCEED 20 IN/LBS WHEN SECURING KEYMOD FASTENERS ON POLYMER ACCESSORIES. ALUMINUM PICATINNY RAIL SECTIONS MAY BE TORQUED TO 30 IN/LBS

FEATURES
-KeyMod Picatinny Nylon Rail Section
-3"
-Black
-Rail section is made of Lightweight Impact Resistant Polymer
-Mounting hardware is made of Corrosion Resistant Stainless Steel
-Made to the Mil-Standard 1913 Picatinny Arsenal Specifications
-Features a Snag resistant design, while retaining Mil-Standards specs
-Self-contained assembly, eliminates the possible loss of mounting hardware
-Fits ALL KeyMod interface mounting surfaces

NOTE: NYLON/POLYMER PICATINNY RAIL SECTIONS ARE FOR NON-LOAD BEARING ACCESSORIES ONLY. ALUMINUM PICATINNY RAIL SECTIONS RECOMMENDED FOR LOAD BEARING. DO NOT EXCEED 20 IN/LBS WHEN SECURING KEYMOD FASTENERS ON POLYMER ACCESSORIES. ALUMINUM PICATINNY RAIL SECTIONS MAY BE TORQUED TO 30 IN/LBS

FEATURES
-KeyMod Picatinny Aluminum Rail Section
-5.5"
-Black
-Rail section is made of Hard Anodized Aircraft Aluminum Alloy
-Mounting hardware is made of Corrosion Resistant Stainless Steel
-Made to the Mil-Standard 1913 Picatinny Arsenal Specifications
-Features a Snag resistant design, while retaining Mil-Standards specs
-Self-contained assembly, eliminates the possible loss of mounting hardware
-Fits ALL KeyMod interface mounting surfaces

FEATURES
-KeyMod Picatinny Aluminum Rail Section
-4"
-Black
-Rail section is made of Hard Anodized Aircraft Aluminum Alloy
-Mounting hardware is made of Corrosion Resistant Stainless Steel
-Made to the Mil-Standard 1913 Picatinny Arsenal Specifications
-Features a Snag resistant design, while retaining Mil-Standards specs
-Self-contained assembly, eliminates the possible loss of mounting hardware
-Fits ALL KeyMod interface mounting surfaces

FEATURES
-KeyMod Picatinny Aluminum Rail Section
-3"
-Black
-Rail section is made of Hard Anodized Aircraft Aluminum Alloy
-Mounting hardware is made of Corrosion Resistant Stainless Steel
-Made to the Mil-Standard 1913 Picatinny Arsenal Specifications
-Features a Snag resistant design, while retaining Mil-Standards specs
-Self-contained assembly, eliminates the possible loss of mounting hardware
-Fits ALL KeyMod interface mounting surfaces

FEATURES:
-6063 Extruded Aluminum
-M-Lok rail
-1913 Picatinny
-Black Nitride finish

FEATURES:
-6063 Extruded Aluminum
-M-Lok rail
-1913 Picatinny
-Black Nitride finish

FEATURES:
-Allows the attachment of various 1913 Picatinny rail-mounted acessories such as lights, vertical grips, etc
-Features beveled ends to reduce snagging & eliminate sharp corners & edges
-Solid Aluminum Construction
-3.1", 5 Slot, M-LOK

FEATURES:
-Mount your favorite bi-pod to an M-Lok firearm
-Machined to fit the easy to use M-Lok mounting system
-2.3"
-Black aluminum

FEATURES:
-Allows the attachment of various 1913 Picatinny rail-mounted acessories such as lights, vertical grips, etc
-Features beveled ends to reduce snagging & eliminate sharp corners & edges
-Solid Aluminum Construction
-6", 15 Slot
-M-LOK

FEATURES:
-Allows the attachment of various 1913 Picatinny rail-mounted acessories such as lights, vertical grips, etc
-Features beveled ends to reduce snagging & eliminate sharp corners & edges
-Solid Aluminum Construction
-3.8", 9 Slot
-M-LOK

FEATURES:
-Allows the attachment of various 1913 Picatinny rail-mounted acessories such as lights, vertical grips, etc
-Features beveled ends to reduce snagging & eliminate sharp corners & edges
-Solid Aluminum Construction
-3", 7 Slot
-M-LOK

FEATURES:
-Allows the attachment of various 1913 Picatinny rail-mounted acessories such as lights, vertical grips, etc
-Features beveled ends to reduce snagging & eliminate sharp corners & edges
-Solid Aluminum Construction
-2.2", 5 Slot
-M-LOK

FEATURES:
-Allows the attachment of various 1913 Picatinny rail-mounted acessories such as lights, vertical grips, etc
-Features beveled ends to reduce snagging & eliminate sharp corners & edges
-Solid Aluminum Construction
-3.1", 5 Slot
-Keymod

FEATURES:
-Allows the attachment of various 1913 Picatinny rail-mounted acessories such as lights, vertical grips, etc
-Features beveled ends to reduce snagging & eliminate sharp corners & edges
-Solid Aluminum Construction
-6", 15 Slot
-Keymod

FEATURES:
-Allows the attachment of various 1913 Picatinny rail-mounted acessories such as lights, vertical grips, etc
-Features beveled ends to reduce snagging & eliminate sharp corners & edges
-Solid Aluminum Construction
-3.8", 9 Slot
-Keymod

FEATURES:
-Allows the attachment of various 1913 Picatinny rail-mounted acessories such as lights, vertical grips, etc
-Features beveled ends to reduce snagging & eliminate sharp corners & edges
-Solid Aluminum Construction
-3", 7 Slot
-Keymod

FEATURES:
-Allows the attachment of various 1913 Picatinny rail-mounted acessories such as lights, vertical grips, etc
-Features beveled ends to reduce snagging & eliminate sharp corners & edges
-Solid Aluminum Construction
-2.2", 5 Slot
-Keymod

FEATURES:
-Attach your favorite GrovTech push button swivel to your easy to use M-Lok mounting system
-Rotating
-Allows your swivel to rotate fully for quick adjustments and freedom of motion

FEATURES:
-Attach your favorite GrovTech push button swivel to your easy to use M-Lok mounting system
-Non-rotating
-Keeps your swivel in fixed position to avoid having your sling get in the way

FEATURES:
-Allows the attachment of various 1913 Picatinny rail-mounted acessories such as lights, vertical grips, etc
-Features beveled ends to reduce snagging & eliminate sharp corners & edges
-Solid Aluminum Construction
-3.1", 5 slot
-Stock AR

FEATURES:
-Allows the attachment of various 1913 Picatinny rail-mounted acessories such as lights, vertical grips, etc
-Features beveled ends to reduce snagging & eliminate sharp corners & edges
-Solid Aluminum Construction
-6", 15 Slot
-Stock AR

FEATURES:
-Allows the attachment of various 1913 Picatinny rail-mounted acessories such as lights, vertical grips, etc
-Features beveled ends to reduce snagging & eliminate sharp corners & edges
-Solid Aluminum Construction
-3.8", 9 Slot
-Stock AR

FEATURES:
-Allows the attachment of various 1913 Picatinny rail-mounted acessories such as lights, vertical grips, etc
-Features beveled ends to reduce snagging & eliminate sharp corners & edges
-Solid Aluminum Construction
-2.2", 5 Slot
-Stock AR

FEATURES:
-6060 T-6 Aluminum
-Black Type III Hard Anodizing
-KeyMod Mount system
-Hardware included
-Fits Harris Style bipods

FEATURES:
-6060 T-6 Aluminum
-Black Type III Hard Anodizing
-Steel Stud w/ black oxide finish
-M-Lok Mount system
-Hardware included
-Fits Locking Swivels

FEATURES:
-6060 T-6 Aluminum
-Black Type III Hard Anodizing
-Steel Stud w/ black oxide finish
-KeyMod Mount system
-Hardware included
-Fits Locking Swivels

FEATURES:
-6060 T-6 Aluminum
-Black Type III Hard Anodizing
-KeyMod Mount system
-Hardware included
-Full Rotational