Parts

Wilson ambidextrous thumb safety for 1911 stainless

FEATURES:
-Stainless
-Provides a comfortable thumb rest for shooters who prefer to shoot with a high thumb
-Both sides of this safety are extended, wide & angled downward for greatly enhanced shooter comfort
-Allows rapid actions of the safety
-Excellent choice for lefties looking for a slightly wider lever on the right side of the gun

Other Features: Both sides of saftey are extended, wide and angled down for greatly enhanced shooter comfort

Wilson ar15 lower receiver small parts kit
Other Features: Does not include fire control group

Kns bolt catch retaining pin ar15/m16 black

FEATURES:
Black Nitride
Weight: 0.01lbs
Dimensions: 3 x 2 x.5"

Other Features: Includes 3 c-clips and one bolt catch retaining pin

Beretta magazine well insert cx4 rifle px4 for 9mm/.40 mags

FEATURES:
-This magazine well insert for the Beretta Cx4 carbine will allow the shooter to utilize Beretta PX4 pistol
magazines
-The ability to use the same magazines in both the pistol & carbine is not only convenient, but also saves
the shooter the expense of purchasing extra, model-specific magazines for the carbine
-For 9mm/.40 Mags

Odin extended magazine release xmr burnt bronze for ar-15

FEATURES:
-Burnt Bronze
-Compatible with KNS pins
-Not recommended for use with BAD lever
-Four times larger than factory magazine buttons
-Large surface area for quick magazine reloads
-Easy to reach
-Ergonomic design
-Release magazine without changing grip or position
-Contoured for positive depression & reduced slip
-Weight: 0.15oz (including button, paddle, and screws)
-All parts included
-Easy drop in installation

Other Features: Comes with screw and button,.78" wide by.94" long, works with kns pins

Beretta frame apx wolf grey polymer

FEATURES:
-Wolf Grey
-Beretta APX Grip Frame
-Come w/ Two different backstraps: thin & large size

Other Features: Not a seralized part

Cmmg receiver extension kit w/mil-spec buffer tube ar-15

Features:
-Combine this kit with your choice of lower parts kit & butt stockto complete your lower group

Includes:
-CMMG6-position receiver extension
-Carbine buffer assembly
-Carbine action spring

Other Features: Includes mil-spec buffer tube, buffer, buffer spring, casle nut, receiver end plate.Ready to accept your mil-spec stock.

Cmmg parts kit for ar-15 enhanced field repair

FEATURES
-Allparts meet or exceed Mil-Spec
-Enhanced field repair

Ghost grip plug kit for gen.4 glocks

FEATURES:
-Secures in the frame utilizing the lanyard hole
-Keeps dirt & debris out of the trigger area as well as help lead the magazine into the mag well
-Fits all Gen 4 Glocks except Glock 21 Gen 4
-will NOT install on a Gen 4 that is using any of the backstraps

Other Features: Fits gen 4 glock 17, 19, 22, 23, 31, 32, 34, 35, 37, 38.Includes two plugs one for use with a backstrap and another for use without a backstrap

Ghost forward slide release fits most 3 pin glocks

FEATURES
-For 3 pin Glocks only
-Forward is faster
-Forward prevents operator malfunctions
-Bullet proof design
-Drop-in
-Lefty friendly

Other Features: Easy to install/drop in fits 3 pin glocks only forward design-fastest, prevents operator malfunctions lefty friendly

Grovtec muzzle thread protectr 1/2-28 x.625" pencil barrels

FEATURES
-1/2-28 x .625" Pencil Barrels
-Protects threads when not using muzzle brakes, flash hiders or suppressors
-Quality steel construction
-Black-oxide finish

Cmc ar15/ar10 nitride gas tube coated intermediate length

FEATURES:
Intermediate Length Gas Tube 13.650"
304 Stainless
Nitride Coated

Other Features: Intermediate length gas system is 2" longer than mid length and 1.5" shorter than rifle length gas system.

Beretta frame apx compact wolf grey polymer
Other Features: Not a seralized part

Angstadt extended magazine release angstadt 9mm black
Other Features: Fits angstadt arms 0940 lowers and udp-9 firearms only

Battle arms enhance bolt catch cast steel black
Other Features: Oversized control surfaces for easy engagement.T-shaped heel elegant tapered surface and skeletonized design

Phase 5 charging handle ambi- battle latch for ar-15 black

FEATURES:
-Incorporates several structural & functional improvements
-7075 Aluminum
-Ambidextrous design
-Stainless coiled spring pin & increased sidewall thickness provide exceptional performance under
repeated abuse & extreme situations

Ergo grip car stock wrench

FEATURES
-Manufactured from heat treated steel
-Rubberized grip
-Performs the job of a Mil-Spec Castle Nut Wrench
-Performs the job of a Standard Length Receiver Extension Wrench

Cmmg gas block assy..936" low profile for ar-15

FEATURES
-4142 chrome moly steel
-.936" low profile gas block
-Includes installation screws

Ghost ext.Tact.Mag release fits glock gen 1-3 45acp/10mm

FEATURES
-For large frame Glock Gens 1-3 .45 ACP & 9mm pistols
-Extended
-Larger is faster
-Larger increases operator performance
-Snag free beveled design

Other Features: Designed for glock 45acp/10mm but will fit all gen1-3 if longer is wanted on small or medium frame guns.Large frame glocks

Adams arms piston kit micro adj mid-length.750gb low mass
Other Features: For.223/5.56x45mm nato, includes one piece bcg, p series micro block adjustable with 5 settings, with low mass carrier.750 gas block, mid-length

Beretta grip screw kit allen style 4ea.Screws and washers

FEATURES:
-Allen head
-4 Beretta grip screws
-4 Beretta washers
-Matte black finish
-Fits on 92 and 80 series

Ed brown slide recoil buffers 6-pack for 1911

Cruxord mag release glock 42 gen 4 aluminum

FEATURES
-For Glock 42
-Ribbed contact surface for added grip & feel
-Direct replacement for stock plastic piece
-Machined from billet aluminum alloy
-Black hard anodized finish
-Allows you to eject your magazine without manipulation of your grip, as opposed to the stock equipment

Other Features: Fits glock 42 gen 4, made in usa

Manticore tavor switchback charging handle for iwi tavor

FEATURES:
-Folding charging handle that will work on either side of the Tavor
-Lowest possible profile when folded
-Automatically goes back to the stowage position after going forward
-Black

Other Features: Ambidextrous, made in usa

Guntec qd swivel adapter alum m-lok gen-2 blk

FEATURES:
-Gen 2 design w/ 2 M-Lok mounting points
-Steel QD swivel
-Aluminum adapter
-Lightweight
-1" swivel
-Fits all M-Lok handguards

Other Features: Quick detach steel swivel lightweight aluminum adapter 1" swivel width use with m-lok rails made in usa

Bcm parts kit lower black for ar-15

FEATURES
-AR15 Enhanced Lower Parts Kit
-Black
-This kit includes all the Mil-Spec quality components along with some fantastic upgrades including;
-BCM PNT Trigger Assembly
-BCM Pistol Grip, Mod 3
-BCM Enhanced Trigger Guard
-Made in the USA

Beretta magazine release kit for px4 series 3-pieces

FEATURES:
-PX4 Magazine Release Kit
-3 piece set ( High, Medium & Low)

Battle arms enhanced complete lower parts kit steel black
Other Features: Oversized control surfaces for easy engagement.T-shaped heel elegant tapered surface and skeletonized design kit contains enhanced bolt catch, enhanced magazine catch , enhanced single side safety selector, and adjustable tactical grip.

Adv.Tech.Military buffer tube assembly
Other Features: Includes: ar-15 recoil plug and buffer spring, steel mil-grade e-coated castle nut locking ring mil-spec buffer tube

Tps arms.223/5.56 lower part kit without grip
Other Features: Enhanced trigger group, hammer disconnector, selector, bolt catch spring, detent spring, bolt catch buffer, take down detent, bolt catch magazine catch spring, bolt catch roll pin, magazine catch button, magazine catch, front pivot pin, hammer spring, trigger spring, trigger guard

Beretta magazine release assy.Cx4 rifle px4 for 9mm/.40 mags

FEATURES:
-Magazine Release
-Fits 8000 Series

Magpul bolt action magazine well kit hunter 700la magnum

FEATURES
-Designed specifically for the Hunter 700L Stock & long action .300WM caliber AICS (Accuracy
International Chassis Systems) pattern magazines
-Installs easily with no gunsmithing required*
-Reinforced polymer construction provides durability with light weight
-Large trigger guard allows for use with gloves & accepts most factory and aftermarket curved triggers**
-Steel action screw pillars
-Low-profile, anti-snag ambidextrous magazine release is made of Melonite® treated steel for wear &
corrosion resistance
-Includes one .300WM classPMAG 5 AC L, Magnum magazine

* Due to potential variability of receiver dimensions, gunsmithing may be required for optimal fit &
functionality.

** Some triggers, especially those with longer and/or straight trigger bows, may not be compatible without
modification to the trigger guard.

Other Features: Drop-in solution for the magpul hunter 700 la stock.Allows use of detachable box magazine.Includes pmag 5 acl la magnum magazine