Tactical Rails And Accessories

Magpul hand guard moe sl ar15 carbine black

FEATURES
-Narrow design replaces bulky M4 Carbine-type plastic hand guards
-Easy to install utilizing existing delta ring & round front hand guard retaining cap with A2 front sight
assembly*
-Slots at the two, six, & ten o'clock positions for mounting direct-attach M-LOK accessories or M-LOK
1913 Picatinny rail sections
-Reinforced, heat-resistant polymer construction
-Integral riveted aluminum heat shield
-Front lip & long side extensions shields hand from hot sight assembly

Note: The MOE SL Hand Guard – Carbine-Length is a direct replacement for M4 Carbine-type plastic, two-piece hand guards & utilizes the existing round front hand guard retaining cap & spring-loaded delta ring.

*Must be used with the triangular A2 front sight assembly with round retaining cap; other gas blocks are not compatible.
Factory sling swivel is not compatible & , if equipped, must be removed from the A2 front sight assembly.

Other Features: Fits ar15 w/carbine length gas system, m-lok accesory slots.

Magpul xtm hand stop kit picatinny mount black

FEATURES
-Four-piece
-Served as a lightweight, low-profile rail mounted indexpoint for improved weapon control, or as a forward
stop to prevent the shooter's hand from reaching the hot front sight assembly or muzzle
-Kit includes one Hand Stop, one Index Panel, one full XTM Enhanced Panel, & one XTM Enhanced Half
Panel

Other Features: Fits 1913 picatinny rails, four piece kit, rail mounted index point or used as a forward stop

Magpul rail panels xtm fits picatinny rails black 4pk

FEATURES
-Low-profile
-Two-piece
-Attach anywhere on a 1913 Picatinny rail without having to remove previously mounted accessories
-Aggressive anti-slip texture
-Dual-side routing clips for retention of light/laser cables
-Each set comes with four (4) two-piece panels, which will cover ONE side of a carbine rail

Other Features: Fits picatinny rails, package of four

Magpul hand guard m-lok moe ar-15 carbine fde

FEATURES
-Replaces standard M4 Carbine-type plastic hand guards
-Compatible with most piston-driven as well as 'direct impingement' gas systems
-Easy to install utilizing existing delta ring and round or triangular front hand guard retaining cap
-M-LOK slots at the two, six, and ten o'clock positions for mounting MIL-STD-1913 Picatinny rails or other
direct-attach M-LOK accessories
-Reinforced, heat-resistant polymer construction
-Integral riveted aluminum heat shield
-Front lip and side extensions, shields hand from hot gas block
-Relieved area at the top rear accommodates many overhanging optic mounts

Note: The MOE M-LOK Hand Guard – Carbine-Length is a direct replacement for M4 Carbine-type plastic, two-piece hand guards and utilizes the existing front hand guard retaining cap and delta ring.

Other Features: Fits ar15 w/carbine length gas system

Magpul hand guard m-lok moe ar-15 carbine black

FEATURES
-Replaces standard M4 Carbine-type plastic hand guards
-Compatible with most piston-driven as well as 'direct impingement' gas systems
-Easy to install utilizing existing delta ring and round or triangular front hand guard retaining cap
-M-LOK slots at the two, six, and ten o'clock positions for mounting MIL-STD-1913 Picatinny rails or other
direct-attach M-LOK accessories
-Reinforced, heat-resistant polymer construction
-Integral riveted aluminum heat shield
-Front lip and side extensions, shields hand from hot gas block
-Relieved area at the top rear accommodates many overhanging optic mounts

Note: The MOE M-LOK Hand Guard – Carbine-Length is a direct replacement for M4 Carbine-type plastic, two-piece hand guards and utilizes the existing front hand guard retaining cap and delta ring.

Other Features: Fits ar15 w/carbine length gas system

Magpul rail section 11 slot fits moe handguards black

FEATURES
-Size L5 (11 Slots)
-Max overall length of 4.9"
-Mounting screw center-to-center of 3.2"
-For use with MOE hand guards & forends
-Allows the attachment of various 1913 Picatinny spec rail-mounted accessories
-Injection molded from a proprietary reinforced composite for enhanced strength & durability while
remaining lightweight
-Beveled ends reduce snagging & eliminate sharp corners & edges
-All hardware necessary for attachment directly to integral mounting slots on MOE hand guards &
forends is included
*Additional hardware may be necessary for other applications

Other Features: Fits magpul moe handguards only

Magpul rail section 9 slot fits moe handguards black

FEATURES
-Size L4 (9 Slots)
-Max overall length of 4.1"
-Mounting screw center-to-center of 2.4"
-For use with MOE hand guards & forends
-Allows the attachment of various 1913 Picatinny spec rail-mounted accessories
-Injection molded from a proprietary reinforced composite for enhanced strength & durability while
remaining lightweight
-Beveled ends reduce snagging & eliminate sharp corners & edges
-All hardware necessary for attachment directly to integral mounting slots on MOE hand guards &
forends is included
*Additional hardware may be necessary for other applications

Other Features: Fits magpul moe handguards only

Magpul rail section 7 slot fits moe handguards black

FEATURES
-Size L3 (7 Slots)
-Max overall length of 3.3"
-Mounting screw center-to-center of 1.6"
-For use with MOE hand guards & forends
-Allows the attachment of various 1913 Picatinny spec rail-mounted accessories
-Injection molded from a proprietary reinforced composite for enhanced strength & durability while
remaining lightweight
-Beveled ends reduce snagging & eliminate sharp corners & edges
-All hardware necessary for attachment directly to integral mounting slots on MOE hand guards &
forends is included
*Additional hardware may be necessary for other applications

Other Features: Fits magpul moe handguards only

Magpul rail section 5 slot fits moe handguards black

FEATURES
-Size L2 (5 Slots)
-Max overall length of 2.5"
-Mounting screw center-to-center of 1.2"
-For use with MOE hand guards & forends
-Allows the attachment of various 1913 Picatinny spec rail-mounted accessories
-Injection molded from a proprietary reinforced composite for enhanced strength & durability while
remaining lightweight
-Beveled ends reduce snagging & eliminate sharp corners & edges
-All hardware necessary for attachment directly to integral mounting slots on MOE hand guards &
forends is included
*Additional hardware may be necessary for other applications

Other Features: Fits magpul moe handguards only

Magpul rail panels ladder fits picatinny rails black

FEATURES
-Very low-profile 1913 Picatinny rail coverage
-Made of Santoprene material, a rubbery surface whichoffers improved weapon control & rail protection
-Easily cut for custom lengths
-Each panel fits one side of a carbine-length rail (18 slots)
-One panel per package

Other Features: Fits picatinny rails, one per package

Magpul rail panels xt fits picatinny rails fde

FEATURES
-Low-profile 1913 Picatinny rail coverage
-Easily cut for custom lengths
-The semi-rubbery material offers improved weapon control & rail protection
-Sections can mount next to each other to form a visually continuous cover
-Each panel fits one side of a carbine-length rail
-One panel per package

Other Features: Fits picatinny rails, one per package

Manticore transformer rail 15" gen ii black for ar-15

FEATURES:
-Includes rail, barrel nut, barrel nut wrench & 6 polymer grip panels
-AR-15 Aluminum Free Float rail system w/ ability to intermix Keymod, M-LOK & polymer grip panels
-8 QD sling swivel pockets-three on each side & two underneath
-15" Length

Other Features: M-lok and keymod-on the same rail, m-lok and keymod panels sold seperatly-6 mounting locations on the rail eight qd swivel pockets, ships with barrel nut, barrel nut wrench, and 6 polymer grip panels, made in usa

Manticore transformer rail 13" gen ii black for ar-15

FEATURES:
-Includes rail, barrel nut, barrel nut wrench & 6 polymer grip panels
-AR-15 Aluminum Free Float rail system w/ ability to intermix Keymod, M-LOK & polymer grip panels
-8 QD sling swivel pockets-three on each side & two underneath
-13" Length

Other Features: M-lok and keymod-on the same rail, m-lok and keymod panels sold seperatly-6 mounting locations on the rail eight qd swivel pockets, ships with barrel nut, barrel nut wrench, and 6 polymer grip panels, made in usa

Manticore transformer rail 9" gen ii black for ar-15

FEATURES:
-Includes rail, barrel nut, barrel nut wrench & 6 polymer grip panels
-AR-15 Aluminum Free Float rail system w/ ability to intermix Keymod, M-LOK & polymer grip panels
-8 QD sling swivel pockets-three on each side & two underneath
-9" Length

Other Features: M-lok and keymod-on the same rail, m-lok and keymod panels sold seperatly-3 mounting locations on the rail eight qd swivel pockets, ships with barrel nut, barrel nut wrench, and 3 polymer grip panels, made in usa

Manticore picatinny panel for transformer rail 5-slot black

FEATURES:
-Manticore Arms Transformer Rail handguard system Picatinny panels
-Includes attachment screws
-5-slot, black
-For use only w/ Transformer Rail handguard

Other Features: Sold per each-one panel

Manticore picatinny panel for transformer rail 11-slot black

FEATURES:
-Allows you to mount picatinny accessories direct to your Transformer Rail
-Full picatinny w/ 11 slots across the whole surface
-6061 aluminum w/ a Type III harcoat anodizing
-Black

Other Features: Sold per each-one panel

Mft 4 sided rail 6" handguard ar15/m16 polymer black

FEATURES
-For 6" carbine handguard replacement
-Two-piece handguard provides a four-sided Picatinny rail system for AR15/M16/M4
-Screwless installation, held in place by Delta ring & handguard cap
-Thermal rail covers included
-Constructed of high density polymer

Other Features: Screwless installation, held in place by delta ring and handguard cap stainless steel heat sheild dissipates heat thermal rail covers included constructed of high density polymers

Phase 5 handguard lo-pro slope nose 7.5" m-lok for ar-15 blk

FEATURES:
Length: 7.5"
Inside Diameter: 1.35"
Weight: 6 oz
Inner diameter: 1.350"
6061 T6 aluminum
Low Profile sleek design
Light weight for improved mobility
Steel barrel nut and mounting hardware included
1/2 inch sight distance increase for improved accuracy

Phase 5 handguard lo-pro slope nose 15" m-lok for ar-15 black

FEATURES:
-Developed to accommodate the features of our 7.5" LPSN quad rail to a longer 15" version
-M-LOK is a modualr locking accessory mounting system that is direct attachment
method for hard mounting accessories to a negative space mounting point
-Slender lightweight design, longer nose, ease of installation & superior construction
& finish quality are some of the features that were designed into this system

Phase 5 handguard lo-pro slope nose 15" for ar-15 black

FEATURES:
-Developed to accommodate the features of our 7.5" LPSN quad rail to a longer 15" version
-Slender design, longer nose, ease of installation & superior construction
-The LPSN™ undergoes a rigorous extra de-burring process in order to ensure a smoother snag free finish
-Built-in QD mounts w/ internal stops

Lancer handguard sig mpx 8" m-lok carbon fiber

FEATURES:
-Approximately 50% weight reduction vs OEM aluminum handguard
-1.6" ID allows for over-suppressor use
-M-LOK attachment system for greater compatibility w/ aftermarket accessories
-Same ease of installation as OEM handguard
-Extended versions clear most suppressors for improved ergonomics
-Weight: .18 lbs
-Length: 8"

Lancer handguard sig mpx 4.5" m-lok carbon fiber

FEATURES:
-Approximately 50% weight reduction vs OEM aluminum handguard
-1.6" ID allows for over-suppressor use
-M-LOK attachment system for greater compatibility w/ aftermarket accessories
-Same ease of installation as OEM handguard
-Extended versions clear most suppressors for improved ergonomics
-Weight: .12 lbs
-Length: 4.5"

Lancer handguard sig mpx 14" m-lok carbon fiber

FEATURES:
-14" handguard
-Approximately 50% weight reduction vs OEM aluminum handguard
-1.6" ID allows for over-suppressor use
-M-Lok attachment system for greater compatibility w/ aftermarket accessories

Kriss vector modular rail mk1 black for kriss g2 crb

FEATURES:
-Designed as bolt on handguard extension for your KRISS Vector CRB
-Made of aluminum alloy
-Will not fit the Gen 1 Vector
-Overall length: 8.375"
-Weight: 8 oz.

Kriss vector picatinny side rail kit 7 slots

FEATURES:
-Kriss Vector Picatinny Side Rail Kit
-7 Slot
-Aluminum black
-Designed to mount on the side of the KRISS Vector using the guns existing hard points
-Aircraft aluminum rail provides a secure place to mount a tactical light, laser aiming device or any other desired Picatinny compatible accessory.
-Mount is recommended for use on the right side of the KRISS Vector only.
-Hard coat anodized

Other Features: Recommended for right hand side of kriss only, includes screws

Bcm rail panel kit keymod 5.5" fde 5 pack

FEATURES
-Flat dark earth
-5 pack
-Made to fit ALL KeyMod mounting surfaces with seven (7) consecutive KeyMod slots
-Ultra-slim and radiused surface to allow a "round" handguard feeling
-Aggressive non-slip & non-reflective surface
-Ventilated for cooling
-Bi-directional locking tabs on either end
-5.55" x .625" x .10"
-Can be cut to any length
-Made in USA

Bcm rail panel kit keymod 5.5" black 5 pack

FEATURES
-Black
-5 pack
-Made to fit ALL KeyMod mounting surfaces with seven (7) consecutive KeyMod slots
-Ultra-slim and radiused surface to allow a "round" handguard feeling
-Aggressive non-slip & non-reflective surface
-Ventilated for cooling
-Bi-directional locking tabs on either end
-5.55" x .625" x .10"
-Can be cut to any length
-Made in USA

Bcm rail alpha 9" keymod black fits ar-15

FEATURES
-KMR Alpha
-9"
-Black
-KeyMod Free Float Handguard
-100% aluminum
-Lightweight and durable. Also featuring a proprietary patent pending mounting, indexing and lock up system that mitigates 12:00 rail movement under heat generated from the barrel nut.
-Handguard alone weighs 5.6 oz
-1.3" Inner Diameter
-1.5" OUTSIDE flat to flat
-Handguard flares forward (towards muzzle end) at the 3 and 9 O'Clock positions approximately 1/4"
-Actual length when measured to flare is 9.4"
-The KMR barrel nut will fit over all mil-spec diameter barrels (max of 1")
-Mounting hardware, 2.4 oz, for a total of 8.0 oz on a 9" rail
-The KMR Alpha is hardcoat anodized for corrosion resistance as well as to maintain a non-reflective finish.
-Includes BCM KeyMod Sling Mount

NOTE: NYLON/POLYMER PICATINNY RAIL SECTIONS ARE FOR NON-LOAD BEARING ACCESSORIES ONLY. ALUMINUM PICATINNY RAIL SECTIONS RECOMMENDED FOR LOAD BEARING. DO NOT EXCEED 20 IN/LBS WHEN SECURING KEYMOD FASTENERS ON POLYMER ACCESSORIES. ALUMINUM PICATINNY RAIL SECTIONS MAY BE TORQUED TO 30 IN/LBS

Other Features: Aluminum alloy

Bcm rail alpha 8" keymod black fits ar-15

FEATURES
-KMR Alpha
-8"
-Black
-KeyMod Free Float Handguard
-100% aluminum
-Lightweight and durable. Also featuring a proprietary patent pending mounting, indexing and lock up system that mitigates 12:00 rail movement under heat generated from the barrel nut.
-Handguard alone weighs 4.9 oz
-1.3" Inner Diameter
-1.5" OUTSIDE flat to flat
-Handguard flares forward (towards muzzle end) at the 3 and 9 O'Clock positions approximately 1/4"
-Actual length when measured to flare is 8.39"
-The KMR barrel nut will fit over all mil-spec diameter barrels (max of 1")
-Mounting hardware, 2.4 oz, for a total of 7.3 oz on a 7" rail
-The KMR Alpha is hardcoat anodized for corrosion resistance as well as to maintain a non-reflective finish.
-Includes BCM KeyMod Sling Mount

NOTE: NYLON/POLYMER PICATINNY RAIL SECTIONS ARE FOR NON-LOAD BEARING ACCESSORIES ONLY. ALUMINUM PICATINNY RAIL SECTIONS RECOMMENDED FOR LOAD BEARING. DO NOT EXCEED 20 IN/LBS WHEN SECURING KEYMOD FASTENERS ON POLYMER ACCESSORIES. ALUMINUM PICATINNY RAIL SECTIONS MAY BE TORQUED TO 30 IN/LBS

Other Features: Aluminum alloy

Bcm rail alpha 7" keymod black fits ar-15

FEATURES
-KMR Alpha
-7"
-Black
-KeyMod Free Float Handguard
-100% aluminum
-Lightweight and durable. Also featuring a proprietary patent pending mounting, indexing and lock up system that mitigates 12:00 rail movement under heat generated from the barrel nut.
-Handguard alone weighs 4.5 oz
-1.3" Inner Diameter
-1.5" OUTSIDE flat to flat
-Handguard flares forward (towards muzzle end) at the 3 and 9 O'Clock positions approximately 1/4"
-Actual length when measured to flare is 7.39"
-The KMR barrel nut will fit over all mil-spec diameter barrels (max of 1")
-Mounting hardware, 2.4 oz, for a total of 6.9 oz on a 7" rail
-The KMR Alpha is hardcoat anodized for corrosion resistance as well as to maintain a non-reflective finish.
-Includes BCM KeyMod Sling Mount

NOTE: NYLON/POLYMER PICATINNY RAIL SECTIONS ARE FOR NON-LOAD BEARING ACCESSORIES ONLY. ALUMINUM PICATINNY RAIL SECTIONS RECOMMENDED FOR LOAD BEARING. DO NOT EXCEED 20 IN/LBS WHEN SECURING KEYMOD FASTENERS ON POLYMER ACCESSORIES. ALUMINUM PICATINNY RAIL SECTIONS MAY BE TORQUED TO 30 IN/LBS

Other Features: Aluminum alloy

Bcm rail alpha 15" keymod black fits ar-15

FEATURES
-KMR Alpha
-15"
-Black
-KeyMod Free Float Handguard
-100% aluminum
-Lightweight and durable. Also featuring a proprietary patent pending mounting, indexing and lock up system that mitigates 12:00 rail movement under heat generated from the barrel nut.
-Handguard alone weighs 8.6 oz
-1.3" Inner Diameter
-1.5" OUTSIDE flat to flat
-Handguard flares forward (towards muzzle end) at the 3 and 9 O'Clock positions approximately 1/4"
-Actual length when measured to flare is 15.0"
-The KMR barrel nut will fit over all mil-spec diameter barrels (max of 1")
-Mounting hardware, 2.4 oz, for a total of 11 oz on a very long 15" rail
-The KMR Alpha is hardcoat anodized for corrosion resistance as well as to maintain a non-reflective finish.
-Includes BCM KeyMod Sling Mount

NOTE: NYLON/POLYMER PICATINNY RAIL SECTIONS ARE FOR NON-LOAD BEARING ACCESSORIES ONLY. ALUMINUM PICATINNY RAIL SECTIONS RECOMMENDED FOR LOAD BEARING. DO NOT EXCEED 20 IN/LBS WHEN SECURING KEYMOD FASTENERS ON POLYMER ACCESSORIES. ALUMINUM PICATINNY RAIL SECTIONS MAY BE TORQUED TO 30 IN/LBS

Other Features: Aluminum alloy

Bcm rail alpha 13" keymod black fits ar-15

FEATURES
-KMR Alpha
-13"
-Black
-KeyMod Free Float Handguard
-100% aluminum
-Lightweight and durable. Also featuring a proprietary patent pending mounting, indexing and lock up system that mitigates 12:00 rail movement under heat generated from the barrel nut.
-Handguard alone weighs 7.8 oz
-1.3" Inner Diameter
-1.5" OUTSIDE flat to flat
-Handguard flares forward (towards muzzle end) at the 3 and 9 O'Clock positions approximately 1/4"
-Actual length when measured to flare is 13.4"
-The KMR barrel nut will fit over all mil-spec diameter barrels (max of 1")
-Mounting hardware, 2.4 oz, for a total of 10.2 oz on a very long 13" rail
-The KMR Alpha is hardcoat anodized for corrosion resistance as well as to maintain a non-reflective finish.
-Includes BCM KeyMod Sling Mount

NOTE: NYLON/POLYMER PICATINNY RAIL SECTIONS ARE FOR NON-LOAD BEARING ACCESSORIES ONLY. ALUMINUM PICATINNY RAIL SECTIONS RECOMMENDED FOR LOAD BEARING. DO NOT EXCEED 20 IN/LBS WHEN SECURING KEYMOD FASTENERS ON POLYMER ACCESSORIES. ALUMINUM PICATINNY RAIL SECTIONS MAY BE TORQUED TO 30 IN/LBS

Other Features: Aluminum alloy