Tactical Rails And Accessories

FEATURES
-9 slot
-6061 aluminum, hard coat anodized
-M-LOK mounting hardware included

FEATURES
-7 slot
-6061 aluminum, hard coat anodized
-M-LOK mounting hardware included

FEATURES
-5 slot
-6061 aluminum, hard coat anodized
-M-LOK mounting hardware included

FEATURES
-3 slot
-6061 aluminum, hard coat anodized
-M-LOK mounting hardware included

FEATURES:
6061 aluminum, hard coat anodized
M-LOK(TM) mounting hardware included
Made in USA

FEATURES:
-Ultra-lightweight rail attachment that will assist the operator w/ indexing their support hand
while deploying the weapon
-Can be mounted on the bottom or either side of any M-LOK compatible rail system

FEATURES:
-Ultra-lightweight rail attachment that will assist the operator w/ indexing their support hand
while deploying the weapon
-Can be mounted on the bottom or either side of any M-LOK compatible rail system

FEATURES
-12", Rifle Length
-No gunsmith drop-in installation, installs like factory plastic handguards
-Gen2 design with four anti-rotation QD sockets for push button swivels
-Incredibly lightweight, extremely solid lock-up with monolithic type continuous top rail
-High quality 1913 Mil-Spec rails, T-marked for location
-Constructed from 6061 aluminum, hard coat anodized
-Compatible with most gas piston systems

FEATURES
-9", Mid-Length
-No gunsmith drop-in installation, installs like factory plastic handguards
-Gen2 design with four anti-rotation QD sockets for push button swivels
-Incredibly lightweight, extremely solid lock-up with monolithic type continuous top rail
-High quality 1913 Mil-Spec rails, T-marked for location
-Constructed from 6061 aluminum, hard coat anodized
-Compatible with most gas piston systems

FEATURES
-7", Carbine Length
-No gunsmith drop-in installation, installs like factory plastic handguards
-Gen2 design with four anti-rotation QD sockets for push button swivels
-Incredibly lightweight, extremely solid lock-up with monolithic type continuous top rail
-High quality 1913 Mil-Spec rails, T-marked for location
-Constructed from 6061 aluminum, hard coat anodized
-Compatible with most gas piston systems

FEATURES
-Low-profile for increased mobility & decreased "snag" factor
-Comatible w/ m-lok mounting system
-Fits standard push button, quick detach sling swivel
-8-position (360°), non-rotational locking interface
-All steel construction

FEATURES
-Ultra-slim & radiused surface to allows a "round" handguard feeling, from an Octagonal profile
-Aggressive non-slip or non-reflective surface
-Ventilated for cooling
-Can be installed in either direction
-Can be cut to any length, depending on users requirements
-Each kit contains five panel strips
-Flat Dark Earth

FEATURES
-9" Rail
-Features M-LOK® compatible mounting system
-Free float handguard eliminates loads from barrel, reducing the deflection for more accurate shooting
-Precision Machined 6061-T6 Aluminum Alloy, for high strength & lightweight
-Proprietary engineered profile offers additional cross sectional strength
-Steel barrel nut, to resist movement under heat
-Hard coat anodized
-Handguard alone weighs 6.6oz
-Includes BCM® M-LOK® compatible sling mount
-1.3" Inside diamter
-1.5" wide

FEATURES
-7" Rail
-Features M-LOK® compatible mounting system
-Free float handguard eliminates loads from barrel, reducing the deflection for more accurate shooting
-Precision Machined 6061-T6 Aluminum Alloy, for high strength & lightweight
-Proprietary engineered profile offers additional cross sectional strength
-Steel barrel nut, to resist movement under heat
-Hard coat anodized
-Handguard alone weighs 6.6oz
-Includes BCM® M-LOK® compatible sling mount
-1.3" Inside diamter
-1.5" wide

FEATURES
-Rail section is made of hard anodized aircraft aluminum alloy
-Made to the mil-standard 1913 picatinny arsenal specs
-Features a snag resistant design, while retaining Mil-standards
-M-Lok® compatible
-3"

FEATURES
-10" Rail
-Features M-LOK® compatible mounting system
-Free float handguard eliminates loads from barrel, reducing the deflection for more accurate shooting
-Precision Machined 6061-T6 Aluminum Alloy, for high strength & lightweight
-Proprietary engineered profile offers additional cross sectional strength
-Steel barrel nut, to resist movement under heat
-Hard coat anodized
-Handguard alone weighs 6.6oz
-Includes BCM® M-LOK® compatible sling mount
-1.3" Inside diamter
-1.5" wide

FEATURES
-Optimized design replaces original stamped receiver AK-47/AKM/AK-74 wooden or plastic hand guards
-Easy to install utilizing existing front hand guard retaining cap with sling loop*
-Slots at the three, six, & nine o'clock positions for mounting direct-attach M-LOK accessories or M-LOK
1913 Picatinny rail sections
-Reinforced, heat-resistant polymer construction
-Integral, black oxide coated stainless steel heat shield
-Front lip & side extension shields hand from hot barrel while allowing use of factory sling loop
-Includes replacement polymer Top Cover
-Compatible with UltiMAK Optics Mount top cover
-Accepts factory cleaning rod

*Note: The MOE AK Hand Guard is a direct replacement for standard AK-47/AKM/AK-74 pattern hand guards & utilizes the existing hand guard retaining cap with (or without) sling loop.
Due to the wide range of tolerances of your typical AK, minor fitting may be required. Not compatible with Yugo pattern rifles.

**Specifications based on factory configuration.

FEATURES
-Optimized design replaces original stamped receiver AK-47/AKM/AK-74 wooden or plastic hand guards
-Easy to install utilizing existing front hand guard retaining cap WITHOUT sling loop*
-Slots at the three, six, & nine o'clock positions for mounting direct-attach M-LOK accessories or M-LOK
1913 Picatinny rail sections
-Reinforced, heat-resistant polymer construction
-Integral, black oxide coated stainless steel heat shield
-Front lip & long side extensions shields hand from hot barrel while providing increased gripping surface
-Includes replacement polymer Top Cover
-Compatible with UltiMAK Optics Mount top cover
-Accepts factory cleaning rod

*Note: The MOE AK Hand Guard is a direct replacement for standard AK-47/AKM/AK-74 pattern hand guards & utilizes the existing hand guard retaining cap without sling loop. However, for those weapons with a retaining cap sling loop the MOE AK Hand Guard may be utilized if the loop is removed.

**Specifications based on factory configuration.

FEATURES
-Optimized design replaces original stamped receiver AK-47/AKM/AK-74 wooden or plastic hand guards
-Easy to install utilizing existing front hand guard retaining cap WITHOUT sling loop*
-Slots at the three, six, & nine o'clock positions for mounting direct-attach M-LOK accessories or M-LOK
1913 Picatinny rail sections
-Reinforced, heat-resistant polymer construction
-Integral, black oxide coated stainless steel heat shield
-Front lip & long side extensions shields hand from hot barrel while providing increased gripping surface
-Includes replacement polymer Top Cover
-Compatible with UltiMAK Optics Mount top cover
-Accepts factory cleaning rod

*Note: The MOE AK Hand Guard is a direct replacement for standard AK-47/AKM/AK-74 pattern hand guards & utilizes the existing hand guard retaining cap without sling loop. However, for those weapons with a retaining cap sling loop the MOE AK Hand Guard may be utilized if the loop is removed.

**Specifications based on factory configuration.

FEATURES
-Lightweight, low-profile M-LOK slot index point for improved weapon control
-Forward stop to prevent the shooter's hand from reaching the hot front sight assembly or muzzle
-Aggressive TSP Texture for enhanced weapon control
-Kit includes one M-LOK Hand Stop, one M-LOK Index Panel, & one M-LOK Rail Cover Type 2
-Also includes an M-LOK Hand Stop MOE Adapter for use with Magpul polymer M-LOK Hand Guards or
Forends, as well as other wider profile rails

FEATURES
-Includes 6 panels, each covering one M-LOK slot
-Low-profile, two-piece covers
-Install directly onto most M-LOK aluminum hand guards (non-polymer)
-Non-orientation specific - No up/down, left/right, front/back orientation
-TSP texture for additional grip
-Protrudes only slightly more than 1/8" from the mounting surface to maintain a low-profile
-Center locking tab is pre-scored to allow the user to snap off sections & mix & match colors for a
customized look

FEATURES
-9.5" long - Covers six full M-LOK slots
-Can be cut for customized length or to combine colors
-Compatible with all M-LOK systems
-Non orientation specific - no up/down, left/right, front/back orientation
-Low profile & lightweight
-Made of an extremely heat-resistant material
-Enhanced gripping surface

FEATURES
-11 slots, max overall length of 4.9"
-For use with all M-LOK compatible hand guards & forends
-Allows the attachment of various 1913 Picatinny spec rail-mounted accessories
-Injection molded from a proprietary reinforced composite for enhanced strength & durability while
remaining lightweight
-Beveled ends reduce snagging & eliminate sharp corners & edges
-All hardware necessary for attachment directly to M-LOK slots on either aluminum or polymer
hand guard & forends if included

FEATURES
-9 slots, max overall length of 4.1"
-For use with all M-LOK compatible hand guards & forends
-Allows the attachment of various 1913 Picatinny spec rail-mounted accessories
-Injection molded from a proprietary reinforced composite for enhanced strength & durability while
remaining lightweight
-Beveled ends reduce snagging & eliminate sharp corners & edges
-All hardware necessary for attachment directly to M-LOK slots on either aluminum or polymer
hand guard & forends if included

FEATURES
-7 slots, max overall length of 3.3"
-For use with all M-LOK compatible hand guards & forends
-Allows the attachment of various 1913 Picatinny spec rail-mounted accessories
-Injection molded from a proprietary reinforced composite for enhanced strength & durability while
remaining lightweight
-Beveled ends reduce snagging & eliminate sharp corners & edges
-All hardware necessary for attachment directly to M-LOK slots on either aluminum or polymer
hand guard & forends if included

FEATURES
-5 slots, max overall length of 2.5"
-For use with all M-LOK compatible hand guards & forends
-Allows the attachment of various 1913 Picatinny spec rail-mounted accessories
-Injection molded from a proprietary reinforced composite for enhanced strength & durability while
remaining lightweight
-Beveled ends reduce snagging & eliminate sharp corners & edges
-All hardware necessary for attachment directly to M-LOK slots on either aluminum or polymer
hand guard & forends if included

FEATURES
-3 slots, max overall length of 1.6"
-For use with all M-LOK compatible hand guards & forends
-Allows the attachment of various 1913 Picatinny spec rail-mounted accessories
-Injection molded from a proprietary reinforced composite for enhanced strength & durability while
remaining lightweight
-Beveled ends reduce snagging & eliminate sharp corners & edges
-All hardware necessary for attachment directly to M-LOK slots on either aluminum or polymer
hand guard & forends if included

FEATURES
93 slots, max overall length of 4.1"
-For use with all M-LOK compatible hand guards & forends
-Allows the attachment of various 1913 Picatinny spec rail-mounted accessories
-Machined from mil-spec anodized aluminum
-Beveled ends reduce snagging & eliminate sharp corners & edges
-All hardware necessary for attachment directly to M-LOK slots on either aluminum or polymer
hand guard & forends if included

FEATURES
-7 slots, max overall length of 3.3"
-For use with all M-LOK compatible hand guards & forends
-Allows the attachment of various 1913 Picatinny spec rail-mounted accessories
-Machined from mil-spec anodized aluminum
-Beveled ends reduce snagging & eliminate sharp corners & edges
-All hardware necessary for attachment directly to M-LOK slots on either aluminum or polymer
hand guard & forends if included

FEATURES
-5 slots, max overall length of 2.5"
-For use with all M-LOK compatible hand guards & forends
-Allows the attachment of various 1913 Picatinny spec rail-mounted accessories
-Machined from mil-spec anodized aluminum
-Beveled ends reduce snagging & eliminate sharp corners & edges
-All hardware necessary for attachment directly to M-LOK slots on either aluminum or polymer
hand guard & forends if included

FEATURES
-3 slots, max overall length of 1.6"
-For use with all M-LOK compatible hand guards & forends
-Allows the attachment of various 1913 Picatinny spec rail-mounted accessories
-Machined from mil-spec anodized aluminum
-Beveled ends reduce snagging & eliminate sharp corners & edges
-All hardware necessary for attachment directly to M-LOK slots on either aluminum or polymer
hand guard & forends if included

FEATURES
-Narrow design replaces bulky M4 Carbine-type plastic hand guards
-Easy to install utilizing existing delta ring & round front hand guard retaining cap with A2 front sight
assembly*
-Slots at the two, six, & ten o'clock positions for mounting direct-attach M-LOK accessories or M-LOK
1913 Picatinny rail sections
-Reinforced, heat-resistant polymer construction
-Integral riveted aluminum heat shield
-Front lip & long side extensions shields hand from hot sight assembly

Note: The MOE SL Hand Guard – Carbine-Length is a direct replacement for M4 Carbine-type plastic, two-piece hand guards & utilizes the existing round front hand guard retaining cap & spring-loaded delta ring.

*Must be used with the triangular A2 front sight assembly with round retaining cap; other gas blocks are not compatible.
Factory sling swivel is not compatible &, if equipped, must be removed from the A2 front sight assembly.