Stocks And Forearms

Guntec multi cal collapsible stock set w/adj cheek riser

FEATURES:
-High Density Polymer
-Multiple Cutouts to Reduce Weight
-5.56 Caliber
-Neoprene Rubber Buttpad
-Adjustable cheek riser w/ 6 different heights
-Cheek riser has multi point locking system
-Accepts QD Sling swivel on left or right side
-QD Swivel
-Complete w/ buffer tube, end plate, Castle nut, CAR buffer & Chrome recoil spring

Other Features: New minimalist design complete w/buffer tube ambi 1 point sling plate castle nut, buffer & spring neoprene rubber buttpad

F.A.B.Defense ak-47 vanguard m-lok handguard system fde

FEATURES:
Weight: 5.99 oz
Width: 1.92"
Height: 2.67"
Length: 6.41"
M-LOK Slots at the 12 & 6 positions for mounting forward grips and optics
M-LOK Side Slots at 2, 4, 8 & 10 positions for mounting additional accessories
Innovative additional heatshield for proper thermal insulation
Two integrated QD sling swivel sockets
Extremely durable polymer construction

Other Features: M-lok handguard ak-47

Pro mag archangel rifle stock for mosin-nagant 91-30

FEATURES
-Black
-Easy to install
-Designed for comfort, control & superior weapon retention
-Constructed of high-strength carbon fiber filled polymer
-Ambidextrous gooseneck-style stock with palm swell
-Click-adjustable cheek-riser/length-of-pull
-Front & rear quick detach style flush cups
-Secure grip storage compartment
-Fits Finnish M39 models with some modification
-Pre-inletted for a Timney Trigger
-Includes 10 round detachable magazine
-Soft rubber recoil pad - contoured & textured for superior comfort
-Fits most M1891 rifles, hex/round receivers on 91/30, Soviet M-38/M-44, Chinese T-53 carbines

Other Features: Includes 1-5 round magazine

Odin stock zulu 2.0 w/padded buffer tube fde for ar-15

FEATURES:
-Made from 6061 aluminum & Limbsaver recoil pad
-Secondary Buffer System
-Reduces Recoil
-Weight: 1.23 lbs
-Includes: ZULU Adjustable Stock - Padded Intermediate Buffer Tube - Ambi Sling/QD Plate

Odin stock zulu 2.0 w/padded buffer tube red for ar-15

FEATURES:
-Made from 6061 aluminum & Limbsaver recoil pad
-Secondary Buffer System
-Reduces Recoil
-Weight: 1.23 lbs
-Includes: ZULU Adjustable Stock - Padded Intermediate Buffer Tube - Ambi Sling/QD Plate

Adaptive tactical stock ar-15 mil-spec polymer black

FEATURES
-For AR15/M4
-Designed for owner installation
-M4-style stock with adjustable length-of-pull
-Easy to reach rapid adjust lever
-Integrated QD swivel attachment
-Molded-in non-rust standard sling swivel attachment
-Durable polymer construction
-Non-slip vented rubber recoil pad
-Compatible with Mil-Spec sized extension tubes

Other Features: Rapid adjust lever, oq swivel attachment, rubber recoil pad, fits mil-spec buffer tubes

Manticore slider stock for cz scorpion evo
Other Features: All nfa rules apply weight: 12 oz.Length: 9.125"

Guntec multi cal collapsible stock set black

FEATURES:
-High Density Polymer
-Multiple Cutouts to Reduce Weight
-5.56 Caliber
-Neoprene Rubber Buttpad
-Accepts QD Sling swivel on left or right side
-QD Swivel
-Complete w/ buffer tube, end plate, Castle nut, CAR buffer & Chrome recoil spring

Other Features: New minimalist design complete w/buffer tube ambi 1 point sling plate castle nut, buffer & spring neoprene rubber buttpad

T/c forend encore pro-hunter rifle flex-tech black

FEATURES
-Rifle Forend
-For Centerfire Rifles
-Composite Flextech, Black

Ruger module low comb compact length of pull 12.50"

FEATURES:
-1.26" comb
-12.5" length of pull
-Intended for use with standard iron sights
-Ideal for shooters that prefer a shorter length of pull
-Fits any Ruger rifle with the Modular Stock System

Other Features: Low comb 1.26" compact length pull 12.50"

Mft battlelink utility stock slide on replacement for adj.

FEATURES
-Battlelink Utility Stock
-Slide-on replacement for original collapsible buttstock
-Angled non-slip buttpad allows faster presentation, even with body armor
-Pivoting rear accessed large & watertight storage compartment
-Customizable foam storage block with quick access tab diminishes rattle
-Quick detach sling mounting points (2) are positioned for optimum usage
-3 sling slot options
-Upper section provides enhanced cheek weld
-Manufactured using a specially developed Military Grade reinforced, super tough polyamide

Other Features: Slide on replacement for orginal collapsible butt stock angled non-slip buttpad allows faster presentation watertight storage compartment quick detach sling mounting points

Bcm stock mod 0 sopmod black fits ar-15 mil-spec

FEATURES:
-BCMGUNFIGHTER Stock Assembly (Widebody)
-Fits AR-15
-Black
-Pronounced cheekweld (SOPMOD type)
-Snag free design
-Modular vehicle borne operations sling tab)
-Ambidextrous sling mounting system (2 different types), including QD swivel sockets
-Integrated color matched rubber butt pad

Bcm stock mod 0 sopmod fde fits ar-15 mil-spec

FEATURES:
-BCMGUNFIGHTER Stock Assembly (Widebody)
-Fits AR-15
-Flat Dark Earth
-Pronounced cheekweld (SOPMOD type)
-Snag free design
-Modular vehicle borne operations sling tab)
-Ambidextrous sling mounting system (2 different types), including QD swivel sockets
-Integrated color matched rubber butt pad

Bcm stock mod 1 sopmod fde fits ar-15 mil-spec

FEATURES:
Material: Polymer
Finish: Flat Dark Earth
Size: For Mil-Spec tube
Snag free Design
Modular VBOST (Vehicle Borne Operations Sling Tab)
Longer overall length to fit longer "MilSpec" diameter AR10/A5/Intermediate receiver extensions
Storage compartment located in the toe of the stock, accessible through butt pad
Built in rubber butt pad for secure shoulder placement

Other Features: Storage compartment located in the toe of the stock.More pronounced sopmod cheekweld.Built in rubber butt pad for secure shoulder placement.

Maxim ccs stock ar15 gen6 black

FEATURES:
-Full length cheek weld
-Rapid deployment
-Aluminum Alloy housing
-Works on all AR15 platforms
-Length: 6.825-10.5"

Other Features: Does not include buffer or spring uses standard ar15 buffers and springs

Odin stock zulu 2.0 w/padded buffer tube blue for ar-15

FEATURES:
-Made from 6061 aluminum & Limbsaver recoil pad
-Secondary Buffer System
-Reduces Recoil
-Weight: 1.23 lbs
-Includes: ZULU Adjustable Stock - Padded Intermediate Buffer Tube - Ambi Sling/QD Plate

J&e ar15/ar10 milspec 6-pos rec extension buffer tube blk
Other Features: Anodized

Bcm stock mod 0 fde fits ar-15 mil-spec

FEATURES
-Stock Assembly
-Mod 0
-AR-15
-Flat Dark Earth
-New patent pending latch reinvents the stock's interface with a mil-spec receiver extension, providing the user with superior strength when dropped or when mortaring malfunction clearance drill.
-Snag free Design. No sharp edges prevent tangling of the rifle with the shooter's sling, molle gear, or other kit.
-Modular VBOST (Vehicle Borne Operations Sling Tab)- This tab interfaces with the shooter's riggers' band or bungee to secure the shooter's sling against the stock when the carbine is not in use. Increasingly, this is the most common application when operating inside a vehicle.
-2 different types of ambidextrous sling mounting options, including QD swivel sockets
-Integrated color matched rubber butt pad for secure shoulder placement, along with increased durability
-Simple modular design. 5 parts, and 1 screw allow for modular adaption of future stock options and configurations.

Mft battlelink low profile stock slide on replacement

FEATURES
-Battlelink Utility Low Profile Stock
-Slide-on replacement for original collapsible buttstock
-Angled non-slip buttpad allows faster presentation, even with body armor
-Pivoting rear accessed large & watertight storage compartment
-Customizable foam storage block with quick access tab diminishes rattle
-Quick detach sling mounting points (2) are positioned for optimum usage
-Upper section provides enhanced cheek weld
-Manufactured using a specially developed Military Grade reinforced, super tough polyamide

Other Features: Slide on replacement for limited utility orginal stock angled non-slip buttpad allows faster presentation watertight storage compartment quick detach sling mounting points uppper section provides enhanced cheek weld

Ruger module low comb standard length of pull 13.75"

FEATURES:
-1.26" comb
-13.75" length of pull
-Intended for use with standard iron sights
-Fits any Ruger rifle with the Modular Stock System

Other Features: Low comb 1.26" standard lenght of pull 13.75"

Ruger module high comb standard length of pull 13.75"

FEATURES:
-1.84" comb
-13.75" length of pull
-Intended for use with aftermarket scopes or mounted sights
-Fits any Ruger rifle with the Modular Stock System

Other Features: High comb 1.84" standard lenght of pull 13.75"

Adv.Tech.Ak-47 strikeforce stock system in destroyer gray

FEATURES
-Destroyer Gray
-TactLite 6-position adjustable side-folding stock
-Can be fired from folded position
-TracLOCK System
-Dual sided QD attachment point
-Scorpion recoil system
-Scorpion Razorback recoil pad
-Scorpion recoil pistol grip
-Ergonomic, textured & ventilated upper & lower handguards
-4 Picatinny rails
-One 4" Picatinny toprail
-Two 2" Picatinny rails
-One 2" Picatinny rail with swivel stud
-Blank inserts for when rails are not in use
-Additional ventilation in forend & top cover
-Slot for tactical sling attachment
-3 sling swivel studs
-Includes steel T-nut & bolt
-DuPont® extreme temperature glass reinforced polymer

Fits:
-Most stamped receivers. Will NOT fit milled receivers.

*Will NOT fit the O-PAP/N-PAP M-70. (The M-70 has a stamped receiver, but utilizes a different principle of attaching the stock & the gas piston is longer than a standard AK.)

*ATI AK-47 stocks are NOT compatible with any AK-47 that has an under-folding stock or was originally designed to have an under-folding stock like the NMH-90, etc.

Other Features: 6 position collapsible and side folding stock scorpion recoil system scorpion razorback recoil pad scorpion recoil pistol grip 1- 4" picatinny top rail 2- 2" picatinny rails 1- 2" picatinny w/ swivel stud removable/adjustable cheekrest

Ruger module high comb compact length of pull 12.50"

FEATURES:
-1.84" comb
-12.5" length of pull
-Intended for use with aftermarket scopes or mounted sights
-Ideal for shooters that prefer a shorter length of pull
-Fits any Ruger rifle with the Modular Stock System

Other Features: High comb 1.84" compact length pull 12.50"

Rival arms rifle stock ruger 10/22 chassis system black
Other Features: Fits ruger 10/22 barreled actions, allows use of ar-15 buffer tube, stock and pistol grip, fits factory/aftermarket bbls 1" max diameter m-lok compatible rail system, scalloped forend for a positive grip, tapped for sling swivel stud, designed for ruger factory magazines

Rival arms rifle stock rem 700 sa chassis system black andzd
Other Features: M-lok compatible, scalloped forened for a positive grip, designed for use with aics style magazines, tapped for sling swivel stud rits remington 700 barreled short actions, allows use of ar-15 buffer tube, stock and pistol grip, fits factory and aftermarket bbls 1.375in max

Bcm stock mod 0 black fits ar-15 mil-spec

FEATURES
-Stock Assembly
-Mod 0
-AR-15
-Black
-New patent pending latch reinvents the stock's interface with a mil-spec receiver extension, providing the user with superior strength when dropped or when mortaring malfunction clearance drill.
-Snag free Design. No sharp edges prevent tangling of the rifle with the shooter's sling, molle gear, or other kit.
-Modular VBOST (Vehicle Borne Operations Sling Tab)- This tab interfaces with the shooter's riggers' band or bungee to secure the shooter's sling against the stock when the carbine is not in use. Increasingly, this is the most common application when operating inside a vehicle.
-2 different types of ambidextrous sling mounting options, including QD swivel sockets
-Integrated color matched rubber butt pad for secure shoulder placement, along with increased durability
-Simple modular design. 5 parts, and 1 screw allow for modular adaption of future stock options and configurations.

Mft battlelink minimalist stock mil-spec tube size

FEATURES
-Battlelink Minimalist Stock
-For Mil-Spec size 1.148 diameter receiver extensions (buffer tube)
-Slide-on replacement for original collapsible buttstock
-Angled non-slip buttpad allows faster presentation, even with body armor
-Quick detach sling mounting point is positioned for optimum usage
-One sling shot option
-Upper section provides enhanced cheek weld
-Manufactured using a specially developed Military Grade reinforced, super tough polyamide

Other Features: Slide on replacement for orginal collapsible butt stock 1.148 diameter buffer tube angled non-slip rubber buttpad for faster presentation quick detach sling mounting points

Utg stock assembly ar-15 black 6 position mil-spec

FEATURES
-Proudly made in the USA
-Polymer stock made from impact resistant high-strength material
-Mil-spec diameter extension tube made from aircraft aluminum with rolled threads, hard anodizing
-Built for heavy-duty operations with tightest tolerance control
-Stock assembly complete with action spring, buffer assembly, tear-drop ring, & castle nut

Other Features: Includes buffer, spring, mil-spec buffer tube, end plate and castle-nut, made in the usa

Adv.Tech.Stock ruger 10/22 standard barrel black syn

FEATURES
-Thumbhole Grip Stock
-Dragunov/Military design
-Lightweight - Weighs only 26 oz.!
-Easy drop-in installation
-Ventilated forearm & handguard
-Built-in cheekrest
-Sling swivel studs
-Dowel sling mount
-Scratch resistant
-Weatherproof
-DuPont® extreme temperature glass reinforced polymer

Fits:
-Most Ruger 10/22, will not accommodate rifles equipped with bull barrels

Other Features: Fits 10/22 standard barrel handguard included no gunsmithing sling swivel studs included

Adv.Tech.Stock for sks rifle monte carlo black synthetic

FEATURES
-Monte Carlo Style Rifle Stock
-Checkered grip & forend
-Raised cheekpiece
-X Series recoil reducing buttpad
-Easy drop-in installation - No gunsmithing required
-Sling swivel stud sling attachment
-Scratch resistant
-Weatherproof
-DuPont® extreme temperature glass reinforced polymer

Fits:
-All SKS Rifles

Note: Some minor modification may be required (blade bayonet must be removed to install stock)

Other Features: Monte carlo cheekpiece rubber recoil pad no gunsmithing swivel studs included

Adv.Tech.Stock for sks rifle fiberforce style black syn

FEATURES
-Thumbhole Grip Rifle Stock
-Dragunov/Military design
-Ventilated forearm
-Dowel sling mount
-Improved secure cheekrest locking bolt
-Ambidextrous
-DuPont® extreme temperature glass reinforced polymer

Fits:
-Most SKS Rifles

Note: Blade bayonet must be removed for installation of ATI stock

Some minor modification may be required. SKS Scope Mount sold separately.

Other Features: No gunsmithing dragunov-style design drop-in installation handguard and ventilated f'end adjustable cheekrest

Adv.Tech.Buttstock w/pistol grip most pumps black syn

FEATURES
-Shotforce Pistol Grip Style Shotgun Stock
-Slim Ergonomic Design
-Length of Pull: 14"
-Non-Slip Pistol Grip Texture
-Increased Control &Accuracy
-X Series Reducing Butt-Pad
-Reduces Fatigue When Shooting Slugs and Turkey Loads
-Easy Installation
-Includes Adapters for All Supported Models
-Uses Factory Stock Bolt
-Swivel Stud Sling Attachment
-Scratchproof & Weatherproof
-DuPont^® Extreme Temperature Glass Reinforced Polymer
-Made in the USA

Fits:
-Most Maverick 88, Mossberg 500/535/590/835, Remington 870, & Winchester 1200/1300 12 GA shotguns

Other Features: Fits: 12ga.Mossberg 500/590, remington 870, norinco 98, winchester 1200/1300 includes adapters