Stocks And Forearms

Magpul forend moe m-lok rem 870 12ga fde

FEATURES
-Compatible with Remington 870 12 ga. shotguns
-Reinforced polymer construction
-Increased length for improved pump manipulation
-Does not overlap receiver for sidesaddle compatibility
-M-LOK slots for direct attachment of accessories
-Installation wrench included

Note: Not compatible with the Remington 870 Super Mag.

Magpul stock str ar15 carbine commercial tube black

FEATURES
-Mounts on commercial-spec sized carbine receiver extension tube (not included) from manufacturers
such as Bushmaster, DPMS, Olympic, and others (please see the note below)
-Two water-resistant battery storage tubes located on the left & right sides of the stock
-Each tube will store up to two (2) CR123A lithium or AA batteries
-Tubes are accessible from the rear in any stock position via a hand-removable rubber plug
-Supplemental friction lock minimizes accuracy robbing wobble*
-Premium chrome-silicon lock spring provides positive locking & long service life
-Sloping cheek weld provides a wide contact surface for user comfort
-Shielded release latch prevents snagging & accidental operation
-Replaceable 0.30" Rubber Butt-Pad offers an anti-slip surface & increases impact protection
-Compatible with Magpul ASAP®,ASAP® QD, & other receiver-mount sling attachments
-Sling Mounts
-Rear -Reversible Type 1 Sling Mount fits up to 1.5" push-button QD swivels (swivel not included)
-Rear/Bottom - 1.25" sling loops

Note: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec & commercial-spec. If you have a mil-spec extension on your rifle, make sure to order #MAG470

* Friction lock performance may vary depending on the host receiver extension's dimensional tolerances.

** Specifications based on extended-length (slant-back) commercial-spec carbine receiver extension & may vary depending on tube manufacturer.

Other Features: Fits commercial buffer tubes

T/c forend encore pro-hunter rifle flex-tech black

FEATURES
-Rifle Forend
-For Centerfire Rifles
-Composite Flextech, Black

Guntec multi cal collapsible stock set black

FEATURES:
-High Density Polymer
-Multiple Cutouts to Reduce Weight
-5.56 Caliber
-Neoprene Rubber Buttpad
-Accepts QD Sling swivel on left or right side
-QD Swivel
-Complete w/ buffer tube, end plate, Castle nut, CAR buffer & Chrome recoil spring

Other Features: New minimalist design complete w/buffer tube ambi 1 point sling plate castle nut, buffer & spring neoprene rubber buttpad

Manticore slider stock for cz scorpion evo
Other Features: All nfa rules apply weight: 12 oz.Length: 9.125"

Adaptive tactical stock ar-15 mil-spec polymer black

FEATURES
-For AR15/M4
-Designed for owner installation
-M4-style stock with adjustable length-of-pull
-Easy to reach rapid adjust lever
-Integrated QD swivel attachment
-Molded-in non-rust standard sling swivel attachment
-Durable polymer construction
-Non-slip vented rubber recoil pad
-Compatible with Mil-Spec sized extension tubes

Other Features: Rapid adjust lever, oq swivel attachment, rubber recoil pad, fits mil-spec buffer tubes

Pro mag archangel rifle stock for mosin-nagant 91-30

FEATURES
-Black
-Easy to install
-Designed for comfort, control & superior weapon retention
-Constructed of high-strength carbon fiber filled polymer
-Ambidextrous gooseneck-style stock with palm swell
-Click-adjustable cheek-riser/length-of-pull
-Front & rear quick detach style flush cups
-Secure grip storage compartment
-Fits Finnish M39 models with some modification
-Pre-inletted for a Timney Trigger
-Includes 10 round detachable magazine
-Soft rubber recoil pad - contoured & textured for superior comfort
-Fits most M1891 rifles, hex/round receivers on 91/30, Soviet M-38/M-44, Chinese T-53 carbines

Other Features: Includes 1-5 round magazine

Bcm stock mod 0 fde fits ar-15 mil-spec

FEATURES
-Stock Assembly
-Mod 0
-AR-15
-Flat Dark Earth
-New patent pending latch reinvents the stock's interface with a mil-spec receiver extension, providing the user with superior strength when dropped or when mortaring malfunction clearance drill.
-Snag free Design. No sharp edges prevent tangling of the rifle with the shooter's sling, molle gear, or other kit.
-Modular VBOST (Vehicle Borne Operations Sling Tab)- This tab interfaces with the shooter's riggers' band or bungee to secure the shooter's sling against the stock when the carbine is not in use. Increasingly, this is the most common application when operating inside a vehicle.
-2 different types of ambidextrous sling mounting options, including QD swivel sockets
-Integrated color matched rubber butt pad for secure shoulder placement, along with increased durability
-Simple modular design. 5 parts, and 1 screw allow for modular adaption of future stock options and configurations.

Bcm stock kit mod 0 fde fits ar-15 complete kit

FEATURES
-Stock Kit
-Mod 0
-AR-15
-Flat Dark Earth
-Snag free Design. No sharp edges prevent tangling of the rifle with the shooter's sling, molle gear, or other kit.
-Modular VBOST (Vehicle Borne Operations Sling Tab)- This tab interfaces with the shooter's riggers' band or bungee to secure the shooter's sling against the stock when the carbine is not in use. Increasingly, this is the most common application when operating inside a vehicle.
-2 different types of ambidextrous sling mounting options, including QD swivel sockets
-Integrated color matched rubber butt pad for secure shoulder placement, along with increased durability
-Simple modular design. 5 parts, and 1 screw allow for modular adaption of future stock options and configurations.
Also Includes:
BCM 7075T6 Mil-Spec Receiver Extension
Locking Nut M4 (Castle)
Mil-Spec Carbine Action Spring
Carbine Buffer
BCM QD Swivel Mount End Plate

Other Features: Stock kit includes stock, buffer tube, buffer/spring/endplate, castlenut

Magpul stock ubr gen2 ar15 carbine black

FEATURES
-Mounts on a durable custom Receiver Extension tube (included) to accommodate the common
M4 carbine buffer & spring as well as aftermarket A5 buffer systems*
-Solid "fixed stock" lockup & consistent cheek weld in all positions
-9-Position LOP adjustability
-Adjustment lever requires only gross motor movement to operate yet the entire stock remains
streamlined & anti-snag
-Enhanced lock mechanism with dual locking pawls for maximum drop strength & shock resistance
-Multi-shell construction provides solid foundation & shields critical operating parts from penetration
damage
-Sloping cheek weld combines a slim profile with user comfort
-Storage Compartment in tail of stock is removable & the door is reversible for user preference
-Rubber butt-pad offers an anti-slip surface & increases impact protection
-Rollover on the toe allows for easier shoulder transitions & better fit when using body armor
-Sling Mounts
-Front - QD swivel mount for ambidextrous one-point QD sling mounting
-Left/Right Rear-Rotation-limited QD swivel sling mounts fit up to 1.5" push-button swivels
included)
-Bottom - 1.25" sling loop (additional loop accessible when Storage Compartment is removed)

*The UBR GEN2 includes the required custom Receiver Extension tube, Buffer Spacer, & all mounting hardware. A carbine buffer and spring (M4 or SR25 length) or A5 buffer & spring are required for use with the UBR & are not included.

**Specifications based on factory configuration

Other Features: Mounts on receiver extension tube (included), uses standard carbine buffers and springs with included spacer, or a5 buffers and springs install requires removal of buffer tube.Buffer and spring required but not included.

Guntec multi cal collapsible stock set w/adj cheek riser

FEATURES:
-High Density Polymer
-Multiple Cutouts to Reduce Weight
-5.56 Caliber
-Neoprene Rubber Buttpad
-Adjustable cheek riser w/ 6 different heights
-Cheek riser has multi point locking system
-Accepts QD Sling swivel on left or right side
-QD Swivel
-Complete w/ buffer tube, end plate, Castle nut, CAR buffer & Chrome recoil spring

Other Features: New minimalist design complete w/buffer tube ambi 1 point sling plate castle nut, buffer & spring neoprene rubber buttpad

Guntec airlite alum stock set minimalist design fde

FEATURES:
-Spiral buffer tube
-Aluminum tube & endplate
-Extremely lightweight
-Recoil pad
-Complete w/ buffer tube, end plate, ambi 1 point sling plate, hd castle nut, CAR 3oz buffer & chrome silicon
buffer spring

Other Features: New minimalist design complete w/spiral buffer tube ambi 1 point sling plate castle nut, buffer & spring

Guntec airlite alum stock set minimalist design blk

FEATURES:
-Spiral buffer tube
-Aluminum tube & endplate
-Extremely lightweight
-Recoil pad
-Complete w/ buffer tube, end plate, ambi 1 point sling plate, hd castle nut, CAR 3oz buffer & chrome silicon
buffer spring

Other Features: New minimalist design complete w/spiral buffer tube ambi 1 point sling plate castle nut, buffer & spring

Ab arms urban sniper stock x flat dark earth

FEATURES
-Mounted on Mil-Spec buffer tubes
-1913 Picatinny rail on the bottom
-Removable, fully adjustable & ambidextrous cheek riser system
-Includes the AB Arms Urban Recoil Pad™
-Flat Dark Earth

Other Features: Can be used on any weapon system that uses a carbine length buffer tube

Pro mag archangel rifle kit for ruger 10/22

FEATURES
-Black
-Easy to install
-Designed for comfort, control & superior weapon retention
-Constructed of high-strength carbon fiber filled polymer
-Six-position buttstock with 4 QD sling point
-Pistol grip with finger grooves provides a secure grip
-Includes aluminum muzzle brake with Picatinny mount for gas block height sights
-Free floats any barrel contour including bull barrels

Other Features: Includes:upper rec'r housing w/integral pictinny rail, & lower rec'r housing w/pistol grip (built-in storge comptmt six position archangel combat stock(built-in storage), free float handguard, w/picatinny rails located @ top & bottom positions, & muzzle device w/rail & bayonet lug

Cmmg stock kit for ar-15 collapsible

Features:
-Combine this kit with your choice of lower parts kitto complete your lower group

Includes:
-CMMG 6-position receiver extension
-Carbine buffer assembly
-Carbine action spring
-6-position butt stock assembly

Other Features: Collapsible stock, receiver extension, mil-spec buffer tube size

Magpul stock acs-l ar15 carbine mil-spec tube fde

FEATURES
-Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such as
Colt, Armalite, S&W, LMT, & others (please see the note below)
-Sloping cheek weld provides a wide contact surface for user comfort
-Storage compartment in tail of stock with positive latching access foor on right hand side
-Supplemental friction lock minimizes accuracy robbing wobble*
-Premium chrome-silicon lock spring provides positive locking & long service life
-Shielded release latch prevents snagging & accidental operation
-Replaceable 0.30" Rubber Butt-Pad offers an anti-slip surface & increases impact protection
-Compatible with Magpul ASAP®,ASAP® QD, & other receiver-mount sling attachments
-Sling Mounts
-Mid-Included reversible Sling Mount Kit – TYPE 3 fits up to 1.5" push-button swivels (swivel not
included)
-Rear/Bottom - 1" sling loop

Note: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec & commercial-spec. If you have a commercial-spec extension on your rifle, make sure to order #MAG379

* Friction lock performance may vary depending on the host receiver extension's dimensional tolerances.

** Specifications based on standard-length (flat-back) M4 Carbine receiver extension & may vary depending on tube manufacturer.

Other Features: Fits mil-spec buffer tubes lightweight model

Magpul stock moe fixed ar15 carbine mil-spec tube black

FEATURES:
-Fixed Length
-Integrated 1.25" sling loops
-Durable polymer construction
-Mil-Spec
-Weight: 9.5 oz
-Black

Other Features: Fits mil-spec buffer tubes, fixed model

Ab arms modular rifle system modx g3 rem 700 sa black

FEATURES
-Drop-in chassis for the Remington® Model 700 Short Action, Right Hand
-Includes the aluminum chassis receiver, 11.5" hand guard & 0 MOA scope mount rail

Phase 5 stock ums universal mini stock for ar-15 blue

FEATURES:
-A fixed stock solution for your rilfle that fits a variety of buffer tubes & receiver extensions
-The UMS offers a smaller footprint & bottom curve which makes for a far superior anchor of the stock on the
chest
-This allows an operator to get in & out of position w/ greater of ease

Other Features: Fits most ar-15 buffer tubes utilizing two heavy duty set screws

Phase 5 stock ums universal mini stock for ar-15 black

FEATURES:
-A fixed stock solution for your rilfle that fits a variety of buffer tubes & receiver extensions
-The UMS offers a smaller footprint & bottom curve which makes for a far superior anchor of the stock on the
chest
-This allows an operator to get in & out of position w/ greater of ease

Other Features: Fits most ar-15 buffer tubes utilizing two heavy duty set screws

Mountain tactical tikka t3/t3x cheek riser black
Other Features: Tikka t3/t3x cheek riser

Mft battlelink low profile stock slide on replacement

FEATURES
-Battlelink Utility Low Profile Stock
-Slide-on replacement for original collapsible buttstock
-Angled non-slip buttpad allows faster presentation, even with body armor
-Pivoting rear accessed large & watertight storage compartment
-Customizable foam storage block with quick access tab diminishes rattle
-Quick detach sling mounting points (2) are positioned for optimum usage
-Upper section provides enhanced cheek weld
-Manufactured using a specially developed Military Grade reinforced, super tough polyamide

Other Features: Slide on replacement for limited utility orginal stock angled non-slip buttpad allows faster presentation watertight storage compartment quick detach sling mounting points uppper section provides enhanced cheek weld

Adaptive tactical ex lighted forend rem.870 12ga black

FEATURES:
-Adaptive Tactical EX Performance Tactical Light and Forend
-Black
-Remington 870
-12 Gauge
-300-Lumen Beam

Other Features: 280 lumen tactical flashlight, 3 hour run time, uses 2 aa batteries, 3 settings momentary on, constant on, rapid strobe polycarbonate housing, quick detach light attaches to 2" piacatinny rail.

Magpul stock moe ar15 carbine mil-spec tube black

FEATURES
-Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such as
Colt, LMT, Ruger, S&W, SIG, and others (please see the note below)
-Sloping cheek weld combines a slim profile with user comfort
-Shielded release latch prevents snagging & accidental operation
-Premium chrome-silicon lock spring provides positive locking & long service life
-Side mounting slots accept optional cheek risers for NON AR15/M4 applications
-Removable 0.30" Rubber Butt-Pad offers an anti-slip surface & increases impact protection
-Compatible with Magpul ASAP®, ASAP® QD, & other receiver-mount sling attachments
-Sling Mounts
-Rear/Bottom - 1.25" sling loops
-Toe - Lanyard hole for custom para-cord rigs

Note: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec & commercial-spec. If you have a commercial-spec size extension on your rifle, make sure to order #MAG401

Other Features: Fits mil-spec buffer tubes

Magpul stock moe sl ar15 carbine mil-spec tube black

FEATURES
-Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such as
Colt, LMT, Ruger, S&W, SIG, and others (please see the note below)
-Sloping cheek weld combines a slim profile with user comfort
-Dual-side release latch provides easy adjustment while remaining anti-snag
-Premium chrome-silicon lock spring provides positive locking & long service life
-Internal anti-rattle feature minimizes wobble on receiver extension tube
-Rubber butt-pad offers an anti-slip surface & increases impact protection
-Rollover on the toe allows for easier shoulder transitions & better fit when using body armor
-Compatible with Magpul ASAP®, ASAP® QD, & other receiver-mount sling attachments
-Sling Mounts
-Rear -Integral push-button QD swivel sling mount accommodates up to 1.5" swivels (ambidextrous)
-Rear/Bottom - 1.25" sling loop

Note: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec & commercial-spec. If you have a commercial-spec size extension on your rifle, make sure to order #MAG348

Other Features: Fits mil-spec buffer tubes

Troy stock socc 5.56 blk airborne stock black

FEATURES:
-For AR-15
-Fits standard mil-spec M4 buffer tubes
-Adds reinforcement and strength to M4 buffer tube
-Multiple QD attachment points
-Shorter than a typical stock when collapsed
-Can be installed by rapid deployment or four-position capability
-Color: black
-Length: 14" (when extended)

Other Features: Fits standard mil-spec m4 buffer tubes

Adv.Tech.Buttstock w/pistol grip most pumps black syn

FEATURES
-Shotforce Pistol Grip Style Shotgun Stock
-Slim Ergonomic Design
-Length of Pull: 14"
-Non-Slip Pistol Grip Texture
-Increased Control &Accuracy
-X Series Reducing Butt-Pad
-Reduces Fatigue When Shooting Slugs and Turkey Loads
-Easy Installation
-Includes Adapters for All Supported Models
-Uses Factory Stock Bolt
-Swivel Stud Sling Attachment
-Scratchproof & Weatherproof
-DuPont^® Extreme Temperature Glass Reinforced Polymer
-Made in the USA

Fits:
-Most Maverick 88, Mossberg 500/535/590/835, Remington 870, & Winchester 1200/1300 12 GA shotguns

Other Features: Fits: 12ga.Mossberg 500/590, remington 870, norinco 98, winchester 1200/1300 includes adapters

Adv.Tech.Stock for sks rifle fiberforce style black syn

FEATURES
-Thumbhole Grip Rifle Stock
-Dragunov/Military design
-Ventilated forearm
-Dowel sling mount
-Improved secure cheekrest locking bolt
-Ambidextrous
-DuPont® extreme temperature glass reinforced polymer

Fits:
-Most SKS Rifles

Note: Blade bayonet must be removed for installation of ATI stock

Some minor modification may be required. SKS Scope Mount sold separately.

Other Features: No gunsmithing dragunov-style design drop-in installation handguard and ventilated f'end adjustable cheekrest

Adv.Tech.Stock for sks rifle monte carlo black synthetic

FEATURES
-Monte Carlo Style Rifle Stock
-Checkered grip & forend
-Raised cheekpiece
-X Series recoil reducing buttpad
-Easy drop-in installation - No gunsmithing required
-Sling swivel stud sling attachment
-Scratch resistant
-Weatherproof
-DuPont® extreme temperature glass reinforced polymer

Fits:
-All SKS Rifles

Note: Some minor modification may be required (blade bayonet must be removed to install stock)

Other Features: Monte carlo cheekpiece rubber recoil pad no gunsmithing swivel studs included

Mft battlelink utility stock slide on replacement for adj.

FEATURES
-Battlelink Utility Stock
-Slide-on replacement for original collapsible buttstock
-Angled non-slip buttpad allows faster presentation, even with body armor
-Pivoting rear accessed large & watertight storage compartment
-Customizable foam storage block with quick access tab diminishes rattle
-Quick detach sling mounting points (2) are positioned for optimum usage
-3 sling slot options
-Upper section provides enhanced cheek weld
-Manufactured using a specially developed Military Grade reinforced, super tough polyamide

Other Features: Slide on replacement for orginal collapsible butt stock angled non-slip buttpad allows faster presentation watertight storage compartment quick detach sling mounting points

Adaptive tactical ex lighted forend mberg 500 12ga black

FEATURES:
-Adaptive Tactical EX Performance Tactical Light and Forend
-Black
-Mossberg 500 & 88
-12 Gauge
-300-Lumen Beam

Other Features: 280 lumen tactical flashlight, 3 hour run time, uses 2 aa batteries, 3 settings momentary on, constant on, rapid strobe polycarbonate housing, quick detach light attaches to 2" piacatinny rail.