Reloading Tools

Rcbs fl die set.22 hornet gp-a

FEATURES
-Caliber: .22 Hornet
-This two-die set is intended for reloading bottleneck cases, & consists of a Full-Length Sizer Die
with an Expander-Decapping Unit, & a Seater Die with Bullet Seater Plug.
-The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions
-It sizes the outside of the case, de-primes & expands the neck to accept the bullet
-The die vents to prevent case damage caused by trapped air & for excessive lubricant
-Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing
-Then included Seater Die has a built-in roll crimper to secure the bullet at the same time as it's seated

Lee factory crimp die only.204 ruger

FEATURES
-Factory crimp die for .204 Ruger
-Crimps bullet in place more firmly than any other tool
-A firm crimp improves accuracy
-Higher start pressure insures a more uniform pressure curve & less velocity variation

Lyman e-zee pilot 10mm auto

FEATURES
-For 10mm Auto
-Allows the user to trim cases by hand or with a power attachment (included) to precise
pre-set length - no adjustment of measuring needed
-Comes with a case locking device, cutter, trim-to-length pilot, cutter head and both hand
and power trimming adapters
-Works with any standard shellholder including Lyman, Redding, RCBS, Hornady & Lee Precision
-Assembles in seconds

Lee bullet feed kit 9mm-.365 dia.(.60"-.75")

FEATURES
-Automatically feeds bullets into the mouth of the bullet seating die
-For pistol calibers only
-Used with the Pro 1000 or Load-Master Presses
-Used for9mm to .365caliber bullets with lengths from .6" up to .75"long

Hornady a-tip seating stem 30 cal.308 176gr.

Rcbs primer pocket brush head large

FEATURES
-Removes residue in primer pockets with a couple of twists
-Stainless bristles & interchangeable mounts

Lyman cyclone rotary tumbler with steel media & sifter

FEATURES
-Holds up to 1000 pieces of .223 brass
-Rubber lining protects brass & greatly reduces noise during operation
-Built-in timer can be set to run from 0 to 3 hours
-Large end cap allows easy loading & unloading
-Includes a pair of sifter pans
-The first pan catches the brass, while the second fine screen pan catches the pins
-Includes 5 pounds of stainless steel media pins & a sample packet of Brass Cleaning Solution

Other Features: Includes: 5 lbs.Steel pin media, double sifter system, packet of cleaning solution

Lee collet 2-die set.222 remington

FEATURES
-For .222 Remington
-Collet die set
-Includes a Collet die, Dead length bullet seater die, shell holder, powder dipper, and loading data

Lee quick trim die body 7x57 mauser

FEATURES
-Quick trim die for 7x57 Mauser

Lee full length 2-die set.25wssm

FEATURES
-Lee Pacesetter 2-Die Set
-25 Winchester Super Short Magnum (WSSM)
-Steel material
-Includes: Sizer Die and Bullet Seater Die with built in Roll Crimp
-Threads: 7/8"-14
-Accessories: Shellholder, Powder Dipper, Load Data Sheet, Plastic Container
-Adjustable crimp
-Built to last a lifetime and are great at producing factory like ammunition.

Lyman e-zee pilot.30 carbine

FEATURES
-For .30 Carbine
-Allows the user to trim cases by hand or with a power attachment (included) to precise
pre-set length - no adjustment of measuring needed
-Comes with a case locking device, cutter, trim-to-length pilot, cutter head and both hand
and power trimming adapters
-Works with any standard shellholder including Lyman, Redding, RCBS, Hornady & Lee Precision
-Assembles in seconds

Lee full length 3-die set 7.65 argentine mauser

FEATURES
-Pacesetter 3 die set for 7.65 Argentine Mauser
-Full length sizing die
-Bullet seating die
-Factory crimp die
-Universal shell holder
-Powder dipper
-Instructions/load data

Lee carbide 3-die set.480 ruger

FEATURES
-For .480 Ruger
-3-die set
-Carbide full length sizing die
-Bullet seating die
-Powder thru expanding die
-Universal shell holder
-Powder dipper
-Instructions/load data

Lee collet style crimp die only.30m1 carbine/.32-20win

FEATURES:
-Caliber: 30 Carbine
-Factory Crimp
-Threads: 7/8" - 14

Rcbs ar series die set w/taper crimp seater.300aac blackout

FEATURES
- Caliber: .300AAC Blackout
- Feature a Small Base Sizer Die designed for semi-automatic firearms, and a Taper Crimp Seater Die
-The Small Base Sizer guarantees the cartridge will rechamber in AR-platform weapons
- 2 dies/set

Lyman bleacher loading block for 50 cases up to.388" base

FEATURES
-Molded to closely fit .388" cases
-Made of tough, durable polymer
-Unique stepped design makes it easy to add or remove cases, even when full
-Takes up less space than traditional blocks

Frankford arsenal platinum brass dryer

FEATURES
-Specifically designed to dry brass after Rotary Tumbling or Ultrasonic cleaning
-Vented trays provide the best airflow to minimize drying time
-Top-mounted fan circulates up to 160°F air to quickly dry the brass inside & out
-5 removable trays easily dry up to 1,000 pieces of .223 brass in less than 1 hour
-Heavy Duty 500 watt unit

Other Features: Dries brass after ultrasonic cleaning or rotary tumbling, holds 1000.223 cases, or 2000 9mm cases.

Lee loader.243 winchester

FEATURES
-Complete reloading system for.243 Winchester
-Does not include rubber mallet

Lyman e-zee pilot.243 win.

FEATURES:
-Caliber: .243 Winchester
-Allows the user to trim cases by hand or with a power attachment (included) to precise pre-set length
-The trimmer comes with a case locking device, cutter, trim-to-length pilot, cutter head & both hand & power
trimming adapters

Lee shell plate #5l for load-master

FEATURES
-#5L quick change shell plate
-For Load-Master Press
-For .270 Winchester Short Magnum, .303 British, .30-40 Krag, .300 Magnum & similar

Lee x-press shellholder #21
Other Features: X-press shell holder for app automatic processing press.Allows the case to pass through the shell holder after operations are performed.Fits 6.8 spc, and 224 valkyrie

Egw ammo chamber checker 9mm 50 hole

FEATURES
-Uses the actual Clymer reamers that are used to chamber barrels
-Anodized matte black for durability
-Measures min case diameter
-Measures max overall length

Other Features: Aircraft aluminum,made in usa, anodized matte black

Lee trimmer gauge.38-55 winchester

FEATURES
-For .38-55 Winchester
-Case Length Gauge
-Precise, easy way to trim to length & square the case mouth
-Used with the Cutter & Lock Stud or Zip Trim

Rcbs chamber case length gauge.300 win mag
Other Features: Designed to quickly check case length, diameter, and overall cartridge length of your handloaded ammo.

Lyman primer pocket cleaner large

FEATURES
-Cleans fouling from primer pocket bottoms
-Molded handle included
-Large

Lee spline drive breech lock bushing 4 pack

Lyman magnum inertia bullet puller

FEATURES
-Safely strips loaded rounds in seconds without damage to bullet or case
-New head design allows use on full range of calibers from tiny 5.7 X 28FN to the largest Magnums
-Ergonomic molded handle with rubber insert for comfort & sure grip
-Traps components with just a few raps on the bench

Lee collet 2-die set 7mm-08 remington

FEATURES
-7mm/08 Remington
-2 piece Collet die set
-Collet die that uses a collet to squuze a mandrel
-Dead length bullet seater die
-Shell holder
-Powder dipper
-Loading data

Lee full length 3-die set 7.62x39 russian

FEATURES
-Pacesetter 3 die set for 7.62x39 Russian
-Full length sizing die
-Bullet seating die
-Factory crimp die
-Universal shell holder
-Powder dipper
-Instructions/load data

Mec powder bushing #26

FEATURES
-View MEC's Powder Bushing Chart & Charge Bar Selection information:
https://www.mecshootingsports.com/Images/document/PowderBushingChart.pdf

Lee double cavity mold.277-135-rf w/handles

FEATURES
-Produces a gas checked .277 diameter 135 grain round
-Flat bullet
-Suitable for .270 caliber cartridges
-Handles included

Other Features: For gas checks

Rcbs fl die set 6.5 creedmoor gp-d

FEATURES
-Caliber: 6.5 Creedmoor
-This two-die set is intended for reloading bottleneck cases, & consists of a Full-Length Sizer Die
with an Expander-Decapping Unit, & a Seater Die with Bullet Seater Plug.
-The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions
-It sizes the outside of the case, de-primes & expands the neck to accept the bullet
-The die vents to prevent case damage caused by trapped air & for excessive lubricant
-Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing
-Then included Seater Die has a built-in roll crimper to secure the bullet at the same time as it's seated