Parts

Odin extended magazine release xmr burnt bronze for ar-15

FEATURES:
-Burnt Bronze
-Compatible with KNS pins
-Not recommended for use with BAD lever
-Four times larger than factory magazine buttons
-Large surface area for quick magazine reloads
-Easy to reach
-Ergonomic design
-Release magazine without changing grip or position
-Contoured for positive depression & reduced slip
-Weight: 0.15oz (including button, paddle, and screws)
-All parts included
-Easy drop in installation

Other Features: Comes with screw and button,.78" wide by.94" long, works with kns pins

Odin extended magazine release gen3 xmr3 red for ar-15

FEATURES:
-Compatible w/ BAD Lever & KNS Pins
-Large surface area for quick magazine reloads
-Easy to reach
-Ergonomic design
-Release magazine w/out changing grip or position
-Contoured for positive depression & reduced slip
-Red

Other Features: Billet aluminum, works with magpul bad lever and kns pins

Odin extended magazine release gen3 xmr3 blue for ar-15

FEATURES:
-Made from 6061 Aluminum
-Largest profile yet, making it easily accessible by all shapes & sizes of hands & fingers
-Works w/ both AR15 & AR10 lower receivers
-Release magazine w/out changing grip or position
-Contoured for positive depression & reduced slip

Other Features: Billet aluminum, works with magpul bad lever and kns pins

Odin extended magazine release gen2 xmr2 blue for ar-15

FEATURES:
-Made from 6061 Aluminum
-Larger than a mil spec button making it easily accessible by all shapes & sizes of hands & fingers
-Works w/ both AR15 & AR10 lower receivers
-Release magazine w/out changing grip or position
-Contoured for positive depression & reduced slip

Other Features: Comes with screw and button,.585" wide by.75" long, works with magpul bad lever

Odin extended magazine release glock new frontier lower black

FEATURES:
-Made from 6061 Aluminum
-Weight: .3oz
-Fits New Frontier style lowers

Odin extended charging handle latch black for ar-15

FEATURES
-Black
-Made from 7075 billet aluminum
-Ergonomic design for easy gripping
-Upgrades any Mil-Spec charging handle
-Allows for faster & smoother operation of the charging handle

Other Features: Upgrades any mil-spec charging handle, made of billet almuminum,

Odin lower parts kit w/pistol grip for ar-15

FEATURES:
-31 piece set to complete a lower
-Machined parts, no MIM
-Hammer 8620 steel
-Trigger 8620 steel
-Disconnector 4340 steel
-Trigger Pin 4140 steel
-Bolt Catch 4340 Steel
-Polymer Pistol Grip

Other Features: 31 piece kit includes hammer, trigger, disconnector, trigger pin, bolt catch & polymer pistol grip

Phase 5 charging handle ambi- battle latch for ar-15 red

FEATURES:
-Incorporates several structural & functional improvements
-7075 Aluminum
-Ambidextrous design
-Stainless coiled spring pin & increased sidewall thickness provide exceptional performance under
repeated abuse & extreme situations

Phase 5 charging handle ambi- battle latch for ar-15 black

FEATURES:
-Incorporates several structural & functional improvements
-7075 Aluminum
-Ambidextrous design
-Stainless coiled spring pin & increased sidewall thickness provide exceptional performance under
repeated abuse & extreme situations

Ab arms ar-15 small parts kit
Other Features: Includes:firing pin retaining pin,ejector,ejector spring, ejector pin,extrator spring w/insert,extractor axle,3-gas rings,& donut "o" ring

Angstadt bolt carrier group 5.56 ar-15 black nitride

Angstadt buffer kit 9mm/.45acp 8oz with spring

FEATURES:
8oz 9mm AR-15 carbine buffer assembly
The buffer body is extended in length, there is no need for a spacer
Carbine buffer spring

Angstadt buffer kit 9mm/40sw/.45acp 10oz with spring

FEATURES:
10oz AR-15 carbine buffer assembly for use with 9mm, 45ACP and 40S&W
The buffer body is extended in length, there is no need for a spacer
Compatible with both Glock and Colt
Carbine buffer spring

Angstadt buffer kit 9mm 5.4oz with spring and spacer

FEATURES:

5.4oz 9mm AR-15 carbine buffer assembly
Carbine buffer spring
9mm buffer spacer

Angstadt bolt carrier group 9mm ar-15 glock/colt black

FEATURES:
Machined from 8620 alloy steel with a QPQ black nitride finish
Compatible with both GLOCK® and Colt® 9mm AR-15 magazines
For use with a standard AR-15 hammer
Features removable weight for use with Law Tactical folding stock adapter

Other Features: Uses standard ar-15 hammer, compatible with both glock and colt 9mm magazines

Adv.Tech.Gas block micro.750 low profile

FEATURES
-Designed to allow an extended handguard to cover the gas return area of the barrel
-Machined from steel
-Black Nitride finish
-Limited Lifetime warranty

Other Features: Matte black nitride finish includes 2 set screws to hold the block in place

Adv.Tech.Military buffer tube assembly
Other Features: Includes: ar-15 recoil plug and buffer spring, steel mil-grade e-coated castle nut locking ring mil-spec buffer tube

Wilson mainspring housing for 1911 checkered glass bead blue

FEATURES:
-Improves the grip & appearance of your 1911
-30 LPI checkering
-Fully machined from bar stock with real cut checkering
-Low luster glass bead finish
-Drop in

Wilson slide release for 1911 extended satin stainless

FEATURES:
-Matte stainless finish
-Allows the right thumb to activate the slide release for faster reloads
-Minimal grip change, which can save valuable time
-Minor fitting may be required

Wilson slide release for 1911 extended matte blued

FEATURES:
-Matte blue finish
-Allows the right thumb to activate the slide release for faster reloads
-Minimal grip change, which can save valuable time
-Minor fitting may be required

Wilson bullet proof one piece magwell 1911 full size ss

FEATURES:
-Color: Stainless
-One-piece Machine Bullet Proof® integral construction from solid billet
-Large internal opening possible for positive reloading
-Low profile, radiused outside contour is legal for competition and ideal for carry
-Variety of grip shapes and precisely machined checkering to perfectly match your 1911 pistol
-Flat mainspring model will drop in most guns
-Round butt models will require frame contouring
-Some fitting required to blend magazine well to pre-beveled frames

Wilson grip safety concealment beavertail stainless steel

FEATURES:
-Color: Stainless
-Bullet Proof®
-Machined from hardened bar stock carbon steel
-Wilson compound joint radius is easy to fit by hand
-Modified grip safety arm allows easy disassembly
-Frame modification required

*Use #402 fitting jig for best results

Other Features: Concealment beavertail grip safety bullet proof

Cmmg gas block assy..625" low profile for ar-15

FEATURES
-4140 chrome moly steel
-.625" low profile gas block
-Includes installation screws

Cmmg gas block assy..750" low profile for ar-15

FEATURES
-4141 chrome moly steel
-.750" low profile gas block
-Includes installation screws

Cmmg gas block assy..936" low profile for ar-15

FEATURES
-4142 chrome moly steel
-.936" low profile gas block
-Includes installation screws

Ergo grip car stock wrench

FEATURES
-Manufactured from heat treated steel
-Rubberized grip
-Performs the job of a Mil-Spec Castle Nut Wrench
-Performs the job of a Standard Length Receiver Extension Wrench

Ergo grip gas block.750 low profile for ar-15

FEATURES
-CNC machined 4140 chromoly steel
-Nitride/Melonite QPQ finish
-Chamfered edge, slip-on fit
-Fits under most free float handguards
-Internal diameter 0.750
-Includes (2) set screws for a secure attachment
-Accepts standard gas tube roll-pins (roll-pin NOT included)
-USA made steel & machined in the USA
-Weighs 2 oz.

Other Features: Made in usa

Ergo grip gas block.750 low profile adjustable ar-15

FEATURES
-Designed to fit under the Ergo Modular & SuperLite™ Rail System, as well as most other manufacturer's
free float handguards
-Adjustments are made via a 5/64" set-screw & a 5/64" retaining screw ensures the system remains
locked, no need for Locktite

Ergo grip gas tube s/s carbine length for ar-15

FEATURES
-Precision made stainless steel carbine length gas tube
-Includes roll pin

Other Features: Made in usa

Ergo grip 9mm spacer for pistol caliber carbines

FEATURES:
-Designed for use w/ carbine length buffers on 9mm AR firearms
-Helps to limit rearward travel & lessens the chances of breaking bolt catches
-Machined from 6061-T6 aluminum

Other Features: Made in usa

Ergo grip buffer for ar-15 carbine

FEATURES
-For use with an A4 collapsible buttstock such as the ERGO F93 ProStock

Other Features: Made in usa

Timney safety ar-15 49er 45 or 90 degree ambidextrous

FEATURES:
-Fast, ergonomic 49-degree throw for lighting fast Safety Manipulation
-Superior coatings for best-in-class fit & feel
-Precision-machined surfaces for smooth operation in any environment
-Precision machined, heat-treated steel, w/ replacement spring & carbo nitride coated safety plunger for
ultra-smooth operation w/ extremely positive engagement
-Made in the USA