Muzzle Brakes

Manticore eclipse 1/2x28 flash hider for ar-15

FEATURES:
-Designed specifically for .223 caliber/5.56 weapons w/ a 1/2 x 28 tpi muzzle thread
-8620 heat treated steel
-Black

Other Features: Flash hider, projectile up to.30 cal, 2.25" long, includes crush washer, made in usa

Manticore eclipse 14x1l flash hider

FEATURES:
-Designed specifically for AK's w/ the 14x1L muzzle threading
-8620 heat treated steel
-Will clear any projectile 0.311" in diameter or smaller
-Black

Other Features: Flash hider, projectile up to.30 cal, 2.25" long, includes crush washer, made in usa

Manticore front detent kit for yugo krinkov

FEATURES:
-Fits Yugo PAP krink pistol
-Made with 4140 steel
-Includes detent pin, spring & roll pin
-Black

Other Features: Used on yugo pap krink pistol to hold muzzle device in place

Manticore nightbrake 26x1.5l compensator fits yugo krinkov

FEATURES:
-1/2x28 threads
-Designed specifically for the 26x1.5 left hand thread on the muzzle of the Yugoslavian M92 & M85 Krinkov
rifles & PAP series of pistols
-18 ports distributed around the upper 270° of the device help stabilize & reduce exiting gas pressure
-Will clear any projectile up to .311" in diameter
-Machined from 8620 steel
-Black

Other Features: 26x1.5lmm thread found on most yugo m92 and m85 krinkov rifles and pap series pistols, projectile up to.30 cal, 2.125" inches long made in usa

Manticore reverb 1/2x28 muzzlebrake up to 9mm

FEATURES:
-1/2x28 threads
-For guns shooting 22 Long Rifle-9mm
-Machined from 8620 steel
-Black

Other Features: 1/2x28 threads, projectile up to 9mm, 1.75" long, made in usa

Manticore nightbrake 5/8x24 compensator for ar-10/sr-25

FEATURES:
-5/8x24 threads
-Can be installed on any AR-10 or other 5/8x24 threaded barrel by using the integral wrench flats & the
included crush washer
-18 ports distributed around the upper 270° of the device help stabilize & reduce exiting gas pressure
-Will clear any projectile up to .30 caliber
-Machined from 8620 steel
-Black

Other Features: 5/8x24 threads, projectile up to.30 cal, 1.875" long, includes crush washer, made in usa

Manticore nightbrake 1/2x28 compensator for ar-15

FEATURES:
-Fits any AR-15, SIG 556 or other commonly threaded barrel
-1/2x28 threads
-Designed to provide recoil reduction & virtually eliminate muzzle rise
-18 ports distributed around the upper 270° of the device help stabilize & reduce exiting gas pressure
-Will clear any projectile up to .30 caliber safely
-Black

Other Features: 1/2x28 threads, projectile up to.30 cal, 1.875" long, includes crush washer, made in usa

Manticore nightbrake 14x1l compensator

FEATURES:
-1/2x28 threads
-Designed to provide recoil reduction & virtually eliminate muzzle rise
-18 ports distributed around the upper 270° of the device help stabilize & reduce exiting gas pressure
-Will clear any projectile up to .30 caliber safely
-Black

Other Features: Single detent notch, projectile up to.30 cal, 1.875" long, includes silicone washer, made in usa

Manticore nightbrake 24mm compensator fits most ak74

FEATURES:
-1/2x28 threads
-Designed specifically for the 24mm thread found on the muzzle of most AK-74 rifles
-18 ports distributed around the upper 270° of the device help stabilize & reduce exiting gas pressure
-Will clear any projectile up to .311" in diameter
-Machined from 8620 steel
-Black

Other Features: 24mm thread found on most ak-74 rifles, projectile up to.30 cal, 2.5" long, made in usa

Lancer nitrous compensator.308/7.62 5/8x24 tpi black

FEATURES
-.308 cal.
-Made of black nitrided steel
-Threaded for a5/8-24 muzzle device
-"Tunable" compensator designed for competitive shooters
-Includes different size jets to customize the downward force, minimizing muzzle climb
-Angled blast baffles are incorporated to reduce recoil & further stabilize the rifle
-Includes a crush water & tuning jets

Lancer nitrous compensator 223/5.56 1/2x28 tpi nato black

FEATURES
-.223/5.56mm
-Made of black nitrided steel
-Threaded for a 1/2-28 muzzle device
-"Tunable" compensator designed for competitive shooters
-Includes different size jets to customize the downward force, minimizing muzzle climb
-Angled blast baffles are incorporated to reduce recoil & further stabilize the rifle
-Includes a crush water & tuning jets

Phase 5 muzzle brake little boy.30 cal 5/8x24 black

FEATURES:
-Mil-Spec Black Parkerized
-Length: 2.5"
-Weight: 5 oz.
-Threading: 5/8 x 24 TPI
-Includes 1 crush washer

Phase 5 muzzle brake little boy 5.56mm 1/2x28 ar-15 black

FEATURES:
-Mil-Spec Black Parkerized
-Length: 2.5"
-Weight: 5.3 oz.
-Threading: 1/2 x 28 TPI
-Includes 1 crush washer

Hiperfire hipercomp cq muzzle compensator 5.56 1/2-28 w/wshr

FEATURES:
-Best-In-Class Felt-Recoil Reduction
-3-Gun Competition Reg Compliant
-4-Pronged Tip for Close Quarters Action
-Crush Washer Included

Other Features: Delivers best in class recoil reduction, meet 3 gun dimensional restrictions, made in usa, veteran operated hipercomp series, made in usa , veteran operated

Hiperfire hipercomp muzzle compensator 5.56 1/2-28 w/wsh<

FEATURES:
-Best-In-Class Felt-Recoil Reduction
-3-Gun Competition Reg Compliant
-Tip Reduces Ground-Effects when Shooting Prone
-Crush Washer Included

Other Features: Delivers best in class recoil reduction, meets 3 gun dimensional restrictions, made in usa, veteran operated hipercomp series, made in usa , veteran operated

Bcm compensator mod 1 5.56 1/2x28 fits ar-15

FEATURES
-Gunfighter Compensator
-Fits AR-15
-Mod 1 5.56 1/2 X 28
-Tuned slots and interior cone offer maximum in recoil mitigations, compensation of muzzle-rise, and flash reduction.
-Dual action brake minimizes side pressure and designed to have much less noise associated with typical compensators. Makes it perfect for working in teams for CQB. It is a compensator that is built for the 21st Century Gunfighter.
-Stainless Steel construction for maximum corrosion resistance
-Predrilled hole at the base for permanent installation.
-Includes a Crush Washer
-Should be installed by a qualified armorer.
-Extended version of the BCMGUNFIGHTER MOD 0 - 5.56
-Mount per BATF specs to bring your 14.5 inch barrel over 16 inches (non-NFA)

Bcm compensator mod 0 5.56 1/2x28 fits ar-15

FEATURES
-Gunfighter Compensator
-Fits AR-15
-Mod 0 5.56 1/2 x 28
-Exterior dimensions consistent with Mil-specs for mounting flash hider mounted suppressors
-Tuned slots and interior cone offer maximum in recoil mitigations, compensation of muzzle-rise, and flash reduction.
-Designed to have much less side blast and noise associated with typical compensators. Makes it perfect for working in teams for CQB. It is a compensator built for the 21st Century Gunfighter.
-Stainless Steel construction for maximum corrosion resistance
-Includes a Crush Washer
-Should be installed by a qualified armorer.

Phase 5 muzzle brake fatman.30 cal 5/8x24 black

Phase 5 muzzle brake fatman 5.56mm 1/2x28 ar-15 black

FEATURES:
-2 large ventilated baffle sections & chambers create the compensation needed to reduce the overall
recoil felt by the shooter
-Includes two top ports machined at a 20 Deg. foward directed angle
-These top ports help direct the energy of the spent gas in a manner that maintains a flat consecutive
result shot after shot

Beretta barrel shroud cx4 storm rifle aluminum black

FEATURES:
-Fits on all Cx4 models
-9mm, .40 Smith & Wesson & .45 ACP
-6061-T6 aircraft grade aluminum
-Precision CNC machine from billet
-Lettering indexable/adjustable in position
-Anti-glare
-Semi flat finish
-Weight: 8.2 ounces

Bergara muzzle brake st1 self timing 6.5 cal.5/8-24

FEATURES:
-Caliber: 6.5 Cal.
-Self timing muzzle brake
-Overall length: 2.5"
-Nitride finish

Kns thread adapter ak-47 m14x1.0 lh to 5/8x24 rh
Other Features: Adapts metric 7.62x39 ak barrel to the standard 7.62 thread pitch

Angstadt flash hider 3-lug 9mm 1/2x36 tpi black
Other Features: Does not require the use of shims but can be used if specific timing is desired, do not use a crush washer

Angstadt flash hider 3-lug 9mm 1/2x28 tpi black
Other Features: Does not require the use of shims but can be used if specific timing is desired, do not use a crush washer

Angstadt muzzle brake 3-lug 9mm 1/2x36 tpi black<
Other Features: Does not require the use of shims but can be used if specific timing is desired, do not use a crush washer

Angstadt muzzle brake 3-lug 9mm 1/2x28 tpi black
Other Features: Does not require the use of shims but can be used if specific timing is desired, do not use a crush washer

Angstadt blastwave 3 lug qd 9mm blast shield

FEATURES:
Material: Steel
Size: Fits 9mm 3-Lug muzzle devices
Type: Blast shield
Color: Black

Other Features: Does not require the use of shims but can be used if specific timing is desired, do not use a crush washer

Glfa muzzle brake optimus 6.5 grendel 5/8x24" black

FEATURES:
-Caliber: 6.5 Grendel
-Stainless Steel
-Reduces felt recoil
-Reduces muzzle rise

Other Features: Fits 6.5 grendel barrels with 5/8x24" threads, black nitride finish, optimus series

Cmmg parts compensator a2 1/2-28 for ar-15

FEATURES
-Steel
-A2 Compensator for AR-15
-Size: 1/2 x 28

Cmmg compensator sv brake 5.56mm 1/2-28 for ar15

Cmmg compensator sv brake.458 socom 5/8-32

Cmmg compensator sv brake.45 cal.578-28