Triggers

Elftmann trigger ar-15 match curved adjustable 2.75-4lbs.

FEATURES:
-Curved
-Fits any mil-spec AR-15
-Absolutely Drop-Safe regardless of pull-weight
-Factory set pull-weight is approximately 50% lighter than that of a standard AR-15 trigger, providing
a great combination of speed & accuracy
-Adjustable from 2-3/4 lbs. to 4 lbs. without removing from lower
-Full power hammer spring ensures proper ignition of primer
-Very short pull & reset allows for rapid follow up shots & greater accuracy
-Sturdy trigger assembly designed for rugged, trouble-free use
-Made of lightweight aircraft-grade aluminum & hardened steel
-Unique design of disconnect allows full 1/4" width, eliminating possibility of wear & double-firing
-High performance trigger & hammer needle bearings for smoother & faster firing

Other Features: Fully adjustable 2.75-4# pull, aerospace grade sealed roller bearings on hammer & trigger rotation points.Made in usa lifetime guarantee, 100% drop-safe design, skeletonized trigger

Rifle basix trigger winchester model 70 12oz to 4 lbs black

FEATURES
-Replacement trigger for Winchester Model 70 centerfires - pre or post 1964
-Uses factory safety & is fully adjustable for sear engagement
-Trigger will NOT replace New Model 70 MOA OEM trigger
-Weight of pull range: 12 oz. to4 lbs.
-Comes complete with instructions, hardware pack, & wrenchfor easy user installation
-Black finish

Other Features: Will not fit the new moa trigger system on most current guns black

Wilson trigger competition match for 1911 silver

Features:
-Wilson three-hole serrated aluminum pad
-Matte silver finish on pad
-Blued steel bow
-Over-travel adjustment screw
-No fitting required
-Pad Length: .500"
-Pad Height: .905"

Package Includes:
-Trigger
-6-32 x 5/16" Set Screw
-1/16" Allen Wrench

Elftmann trigger vr80 pro se 3.5lb w/strait shoe red

FEATURES:
3.5 lb pull
Threaded mounting system
Double-Double torsion spring for hammer
Drop-Safe
Full power hammer spring
Precision EDM wire cut hardened American tool steel

Other Features: 3.5lb pull, proprietary threaded mounting system, drop safe, double-double torsion spring for hammer, lifetime guarantee, 100% drop-safe design, unique design of disconnect allows full 1/4" width eliminating wear or dbl firing

Elftmann trigger vr80 pro se 3.5lb w/strait shoe black

FEATURES:
3.5 lb pull
Threaded mounting system
Double-Double torsion spring for hammer
Drop-Safe
Full power hammer spring
Precision EDM wire cut hardened American tool steel

Other Features: 3.5lb pull, proprietary threaded mounting system, drop safe, double-double torsion spring for hammer, lifetime guarantee, 100% drop-safe design, unique design of disconnect allows full 1/4" width eliminating wear or dbl firing

Ghost ultimate 3.5 trigger kit for glocks gen 1-5 drop-in

FEATURES
-For Glock Gen 1-4
-Drop-in
-One Ultimate 3.5 lb. connector
-One 6.0 lb. trigger spring
-One 4.0 lb. firing pin spring (target/sport configuration)
-One 6.0 lb. firing pin spring (self-defense configuration)
-One reduced power firing pin safety spring

Other Features: Drop-in connector for glock for 3.5 lbs trigger pull includes connector and wolf brand springs for the best possible trigger pull does not fit glock 42/43

Timney trigger remington 700 the hit rh nickle straight 2lb

FEATURES:

Finish	Nickel
Material	Steel w / Aluminum Housing
Firearm Fit	Remington 700
Style	Straight
Draw Weight	8 oz
Hand	Right

Other Features: Straight shoe, 8oz-2lb trigger pull, designed for the long range rem 700 shooter, nickle plated

Timney trigger remington 700 the hit rh black straight 2lb

FEATURES:

Finish	Black
Material	Steel w / Aluminum Housing
Firearm Fit	Remington 700
Style	Straight
Draw Weight	8 oz
Hand	Right

Other Features: Straight shoe, 8oz-2lb trigger pull, designed for the long range rem 700 shooter, black

Timney trigger remington 700 the hit rh nickle curved 2lb

FEATURES:

Finish	Nickel
Material	Steel w / Aluminum Housing
Firearm Fit	Remington 700
Style	Curved
Draw Weight	8 oz
Hand	Right

Other Features: Curved shoe, 8oz-2lb trigger pull, designed for the long range rem 700 shooter, nickle plated

Timney trigger remington 700 the hit rh black curved 2lb

FEATURES:

Finish	Black
Material	Steel w / Aluminum Housing
Firearm Fit	Remington 700
Style	Curved
Draw Weight	8 oz
Hand	Right

Other Features: Curved shoe, 8oz-2lb trigger pull, designed for the long range rem 700 shooter, black

Timney trigger remington 788 w/safety 1.5-4lb adjustable
Other Features: Includes safety blued version 1.5-3.5 lb adjustable

Timney trigger weatherby mkv american/japanese black

FEATURES
-For Weatherby Mark V American/Japanese models
-Adjustable trigger pull weight from 1-4 pounds
-Fully adjustable for sear engagement

Other Features: 3lb pull

Timney trigger ruger precision rifle two stage

FEATURES
-Self-contained, 100% drop-in trigger, nickel coated
-Exceptionally smooth, crisp, two-stage trigger pull
-No gunsmithing, fitting, or adjusting required
-Trigger housing constructed of military-grade, 6061 T6 alloy
-CNC machined using state-of-the-art robotics
-Anodized for superior durability

Other Features: Adjustable from 8oz-1lb, drop-in trigger, two stage trigger pull with half pound first stage and one pound second stage

Timney trigger ruger precision rimfire rifle two stage curved
Other Features: Adjustable from 8oz-1lb, drop-in trigger, two stage trigger pull with half pound first stage and one pound second stage

Timney trigger ruger american rimfire rifles

FEATURES
-Self-contained drop in trigger
-Fits Ruger American rifles
-Good crisp 1.5 - 4 pound pull
-Lightweight aluminum housing is anodized for extra durability
-The sear is EDM cut & Teflon-nickel coated for maximum lubricity
-Made in the USA

Other Features: Adjustable from 1.5-4lbs

Timney trigger savage 110 with accutrigger black

FEATURES
-Self-contained drop in trigger
-Fits all Savage bolt-action center fire rifles equipped with AccuTrigger™
-Good crisp 1.5 - 4 pound pull
-Lightweight aluminum housing is anodized for extra durability
-Made in the USA
-NOTE: not for Rimfire rifles

Timney trigger weatherby vanguard 1500 w/safety black

FEATURES
-Lightweight alloy housing
-Working parts are ED machined, hardened, and polished
-Exclusive three position safety
-Adjustable for pull weight, creep, and backlash
-Minor fitting may be required

Other Features: 3 position safety system, 3lb pull

Timney trigger mossberg 100atr w/safety black long action

FEATURES
-Self-contained drop in trigger
-Lightweight aluminum housing with Wire EDM cut, heat treated steel trigger & sear
-Two position, trigger blocking side safety
-Fully adjustable Sear Engagement & pull weight from 1.5-4lbs
-Black
-Teflon nickel coated Sear to guarantee a lifetime of service
-Made in USA

Timney trigger howa 1500 3lb w/safety black

Timney trigger remington 700 w/safety 2 stage nickel

FEATURES
-2-stage trigger
-1lb first stage (adjustable from 8oz to 1.5lbs) & your choice of second stage pull weight (1.5-4lbs)
-Nickel-plated
-Easy to install

Other Features: Includes safety, 1st stage 8oz to 1.5lbs, 2nd stage adjustable 1.5 to 4lbs

Timney trigger remington 700 w/safety 2 stage black

FEATURES
-2-stage trigger
-1lb first stage (adjustable from 8oz to 1.5lbs) & your choice of second stage pull weight (1.5-4lbs)
-Blue(black)
-Easy to install

Other Features: Includes safety, 1st stage 8oz to 1.5lbs, 2nd stage adjustable 1.5 to 4lbs

Timney trigger remington 700 w/safe calvin elite 2stg black

FEATURES:
True drop in trigger
Unique trigger blocking safety
2-stage trigger is adjustable from 8 ounces to 1.5 pounds
No gunsmith needed, easy to install
Trigger will not move on safe
Ready for the range right out of the box or adjustable for custom feel
Fully adjustable for feel

Other Features: With safety, 1st stage 8oz to 1.5lbs, 2nd stage adjustable 8oz to 2lbs

Timney trigger all tikka t3 2/ stage 8oz 1st/1lb 2nd stage

FEATURES:
-Trigger allows you to become more accurate w/ your rifle
-No gunsmith needed, easy to install
-Adjustable for fine precision
-Ready for the range, right out of the box

Other Features: Includes safety, 1st stage 8oz, 2nd stage 1lb

Timney trigger winchester 70 with moa trigger black

FEATURES
-Self-contained drop in trigger
-Fits Winchester Model 70 rifle with the MOA trigger
-Fully adjustable for pull weight, sear engagement (creep) & over-travel
-Adjustable from 1.5 - 4lbs
-Black
-Made in USA

Other Features: Replaces moa triggers found in new rifles winchester introduced the moa trigger in 2008

Timney trigger winchester 70 without moa trigger black

FEATURES
-Self-contained drop in trigger
-Fits Winchester Model 70 rifle without the MOA trigger
-The 401 is adjustable to the Model 54 by building up the cocking piece to Model 70 contour
-Fully adjustable for pull weight
-Adjustable from 1-3lbs
-Black
-Made in USA

Other Features: Will n0t fit the moa triggers found in new rifles winchester introduced the moa trigger in 2008

Timney trigger mosin-nagant rifles fdmn

FEATURES
-Adjustable Mosin Nagant Drop in Trigger
-Adjustable trigger pull, 1.5 to3 pounds
-Anodized 6061-T6 cage
-Trigger block safety

Other Features: Adjustable 1.5-3 lbs

Timney safety low profile for swedish mauser m956lps black

FEATURES
-Low Profile Safety is for the 98 Mauser which cocks on closing of the bolt

Ghost standard 3.5 trigger kit for glocks gen 1-5 drop-in

FEATURES:
-Ultimate 3.5lb Drop-in connector
-6lb Trigger spring
-4lb Firing pin spring (Target/Sport Configuration)
-6lb Firing pin spring (Self Defense Configuration)
-Reduced power firing pin safety spring
-Please Note: The 4lb Firing pin spring may cause light primer strikes in some pistols
-For Self Defense or in a 10mm/45 caliber Glock we recommend the 6lb firing pin spring

Other Features: Drop-in connector for glock for 3.5 lbs trigger pull includes connector and wolf brand springs for the best possible trigger pull does not fit glock 42/43

Rifle basix trigger savage 10 series 4oz to 3 lbs black

FEATURES
-Replaces all 110 Type Savage Actions
-Long & Short, Early & Late, Left & Right hand
-Will replace Models: 10, 11, 12, 110, 16, 111, 112, 114,& 116
-Will replace standard trigger or AccuTrigger
-Will replace all 110 type centerfire triggers manufactured after January 1966
-Also replaces Savage/Stevens Model 200 & Savage 210 slug gun
-Weight of pull range: 4 oz. to 3.0 lbs.
-Comes complete with instructions/installation DVD, hardware pack, & wrenchfor easy user installation
-Black finish

Other Features: Black

Rifle basix trigger savage 10 series 14oz to 3 lbs black

FEATURES
-Replaces all 110 Type Rifles & Edge/Axis Rifles
-Long & Short, Early & Late, Left & Right hand
-Will replace Models: 10, 11, 12, 110, 16, 111, 112, 114,& 116
-Will replace standard trigger or AccuTrigger
-Will replace all 110 type centerfire triggers manufactured after January 1966
-Also replaces Savage/Stevens Model 200 & Savage 210 slug gun
-Weight of pull range: 14 oz. to 3.0 lbs.
-Comes complete with instructions, hardware pack, & adjustment wrenchfor easy user installation
-Black finish

Other Features: Fits all 110 rifles fits edge/axis rifles will replace standard or accutrigger black

Elftmann safety ar stainless ambidextrous speed safety

FEATURES:
-Polished stainless steel
-Push safety design
-Ambidextrous operation
-Extremely fast on-off
-Precision machined from hardened stainless steel
-Compatible with all Mil-Spec receivers
-Includes detent

Other Features: Red/green indicator rings, made in usa.

Elftmann safety for ar black ambidextrous speed safety

FEATURES:
-Black oxide finish
-Push safety design
-Ambidextrous operation
-Extremely fast on-off
-Precision machined from hardened stainless steel
-Compatible with all Mil-Spec receivers
-Includes detent

Other Features: Red/green indicator rings, made in usa.