Traditions
![]()
FEATURES
-Holds twelve 209 primers
-Easy to use
-Just squeeze lanyard loop to remove from body, load primers, & replace lanyard loop
-Can be used on most in-line muzzleloaders
Other Features: Easy to use squeeze lanyard loop to remove from capper, load primers, & replace lanyard loop can use w/most in-line ml'rs
FEATURES
-Already lubed for quick reloads
-100% cotton patches lubed with the all-natural WonderLube 1000 Plus™
-Proven to reduce fouling & save loading& cleaning time
-For .50-.54 cal.
-100 patches per bag
Other Features: Lubricated with all natural wonderlube 1000 plus
FEATURES
-Popular tubular-style flask
-Tastefully adorned with the Traditions™ name
-Solid brass
-Heavy-walled
-Seamless
-Threaded cap for easy filling
-Holds 2 ounces of black powder or Pyrodex®
-Valve-type dispenser with 30 grain spout
Other Features: Heavy walled, seamless cylindr w/threaded cap for easy fillng
FEATURES:
1/4" MOA windage
Elevation adjustments
Nitrogen-filled One piece tube
3" eye relief with rubber fast focus eye piece
Waterproof, shockproof, and fogproof
Raised finger controls for easy adjustment
Other Features: Reticle for.450 bushmaster ballistics
FEATURES
-Solid brass body
-Carries fifteen #11 caps ready for precise dispensing
FEATURES
-Traditional design
-Solid hardwood & brass
-Sure grip to start most balls or bullets
FEATURES
-Lightweight, non-glare starter
-Minimizes weight without sacrificing strength & performance
FEATURES
-Extra-long 37 3/4” PVC rod
-Underneath cleaning jag is a threaded female end which accepts ramrod attachments
-Unscrew again to expose a ball/patch puller
-10/32 thread
-For .50 cal.
Other Features: Includes: ribbed cleaning jag & ball/patch puller female threads which accept any 10/32 accessory
FEATURES
-Fits all Traditions metal flasks & many others.
-75 & 100 grain spouts are sized for the most commonly recommended
loadsso your loading sequence can be quicker & easier
Other Features: Fits all traditions flasks
FEATURES
-Handy for bench & field cleaning
-Bronze brush is sturdy for thorough cleaning
-Cotton swab cleans & oils
-Threaded for all Traditions™ & similar ramrods
-10/32 threaded
-For .50 cal.
Other Features: 10/32 threaded - fits all traditions and similar ramrods
Other Features: 10/32 threaded, includes bronze bore brush, cotton bore swab, fouling scraper, ball/patch puller and worm
FEATURES
-2-piece
-Blued
-For round barrels
-Fits Traditions Lightning & Buckhunter rifle models
Other Features: Fits round barrels fits bolt and slide action muzzleloaders will not fit break open models
FEATURES:
-Comfortable round-handle w/ aluminum short & long starter rods
-Conveniently screws onto your ramrod to serve as an extension/palm saver
-Fits .32 to .58 caliber
-10/32 threads on both ends
FEATURES
-Solid brass aligner
-Specially designed to reduce bullet distortion during loading of sabot & conical bullets
-10/32 thread
-For .50 cal.
Other Features: Threads onto any loading tool which accepts 10/32 threads.
FEATURES
-Easilyremoves fouling in the nipple channels on percussion muzzleloaders & the touch hole of flintlocks
-A lanyard ring on the protective case makes it easy to carry
Other Features: Use for fast, easy removal of fouling in the nipple channels on percussion ml's & the touch hole of flintlocks.Lanyard ring on protective case.
FEATURES
-Designed to utilize musket percussion caps for greater ignition
-Not for use with the Thunder Dome™ Breech Plug
-Fits Traditions™ in-line muzzleloaders with M6x1 threads
-2 per package
Other Features: M6 x 1 threads 2 per pack utilizes musket percussion cap not for use with thunder dome breech plug
FEATURES
-Holds your projectile & pre-measured powder
-Each tube can hold up to 150 grains of loose or pelletized powder
-Able to be used with all calibers
-3 per package
Other Features: Use with all calibers
FEATURES
-Brass body
-Push-up slide extends nipple pick at angle to reach in-line rifle nipples
Other Features: Push0-up slide extends nipple pick at an angle to reach in- line rifle nipples
FEATURES
-Double ended wrench for in-line muzzleloaders
-Lightweight
-Easy to carry
-Fits most side-locks too
-Fits #11 & musket nipple
Other Features: A two ended wrench - one end fits #11 nipples & the other end fits musket nipples lightweight, easy to carry fits most side locks, too.
Other Features: .50 caliber sabots with.45 diammeter 240 grain bullets
FEATURES
-A must with scoped muzzleloaders!
-A steel wrench that will remove 209, musket & #11 nipples plus the breech plug from
Traditions™ In-Line muzzleloaders.
-Use the end with the larger opening to remove 209 nipples & breech plugs
-Use the end with the smaller opening to remove #11 & musket nipples
-Steel handle included
-This wrench replaces the A1356 & A1406 wrenches
Other Features: Handle incl'd this wrench replaces the a1356 & a1406 wrenches
FEATURES:
-This rod is extremely sturdy & durable
-It breaks down into 4 separate pieces for easy storage & transport
-It features a removable T-handle which can be used in 2 different positions to make loading/cleaning
easier & more comfortable
-The end has 10/32 threads for use with other accessories like cleaning brushes
Other Features: 10/32" threads, for.45 cal or larger muzzleloaders, breaks into 4 seperate pieces for easy transport
Other Features: For.44 caliber blackpowder revolvers
FEATURES:
-The curved brass gun hangers come with felt lining to protect your rifle while on display & are easy to
install
-Each hanger comes with two screws for attachment.
-The perfect way to show off your favorite rifle
Other Features: Includes screws, fits most rifles, shotguns and muzzleloaders
FEATURES:
-Straight brass gun hangers are a great way to display your rifle or pistol.
-Simply screw into wall & hang
Other Features: 5mm fits most traditons and cva flintlocks
Other Features: 1/4"x28 for t/c flintlocks
FEATURES
-One side of the ramrod is tapped with 10/32 threads
-30" long, cut to desired length
-The customizable length will help you save time and money!
FEATURES
-This Universal wrench is dual sided so no matter which Traditions Breech plug you have,
you will have the right wrench
-On one end you find a dual slotted wrench
-On the other is the Traditions popular hex style wrench
-No more trying to remember what breech plug you have!
*Fits break-open, drop breech models and inlines with 209 nipples only
Other Features: Fits pursuit pro, lt,xlt and buck stalker
FEATURES:
-Great way to carry accessories & extras out into the field
-The large zippered side compartment holds accessories comfortably & securely
-The three-strap system allows for a secure fit & the padded cheek piece gives comfort when shooting your
rifle.
-Fits most break-action muzzleloaders
-Does not fit thumbhole stocks
Other Features: Fits on most muzzleloaders buttstocks, padded cheek piece and zippered accessory pouch
FEATURES:
-LED Bore Light
-500 hours of use
-For .50 caliber muzzleloaders or larger
Other Features: Led design, 500 hours of use, drop down the bore of your.50cal or larger muzzleloader for easy inspection