Timney
![]()
FEATURES:
-Maintains an ultra-reliable 5-pound hammer spring coupled w/ a crisp & zero creep 1.5-pound pull
-Quick reset
-Trigger comes w/ four different shoes that include curved, flat, heeled, & knurled
-Factory set 1.5 lb trigger pull
Other Features: 1.5 lbs pull non adjustable, small pin model (.156" pin) will fit most ar-15 rifles small pin fits almost all ar15 a few colt ar's use the large.176" pins all other ar-15's use the.156 trigger pins which is mil-spec
FEATURES
-Self-contained
-Drop-in unit ready to install in any SCAR rifles
-3.5 pound pull with s stronger spring for the 308 ammo
-Lightweight alloy for superior durability
-Hammer is EDM machined from S7 tool steel that combines hardness to resist wear with superior
impact resistance to withstand heavy use without chipping or breaking
-Teflon Nickel coating is applied to the hammer to deliver a super smooth trigger pull with superior
lubricity
Other Features: 3.5lbs pull weight fits fn scar-17s
FEATURES:
| Type | Drop-In Trigger |
| Finish | Black |
| Material | Steel w / Aluminum Housing |
| Firearm Fit | Sig MPX |
| Style | Straight |
| Draw Weight | 4.50 lbs |
| Trigger Type | Single-Stage |
Other Features: Single stage, straight shoe, 4.5lb
FEATURES:
| Type | Drop-In Trigger |
| Finish | Black |
| Material | Steel w / Aluminum Housing |
| Firearm Fit | AR-Platform |
| Style | Straight |
| Draw Weight | 2.50-3 lbs |
| Trigger Type | Single-Stage |
Other Features: Single stage, straight shoe, 3lb
FEATURES
-Upgrade your Tavor trigger with the Timney Trigger Sear Pack
-Self-contained drop-in trigger pack is unbelievably easy to install
Other Features: 4lbs pull weight, new gen3 two stage version
FEATURES
-Self-contained
-Drop-in unit ready to install in an AR-10 rifle
-4 pound pull
-Lightweight alloy for superior durability
-If you have a POLYMER LOWER, we recommend putting a small thin piece of aluminum underneath the
trigger to protect the polymer lower.
-Available in standard curved, straight or skeletonized
Other Features: 4 lbs pull non adjustable solid trigger small pin model (.156" pin) will fit most ar-10 rifles
FEATURES:
-Material Steel/Aluminum
-Will fit most AR-15 Rifles
3lbs pull
-Self contained unit
-Uses the same hammer and trigger pins
Other Features: 3 lbs pull non adjustable solid straight trigger small pin model (.156" pin) will fit most ar-15 rifles small pin fits almost all ar15 a few colt ar's use the large.176" pins all other ar-15's use the.156 trigger pins which is mil-spec
FEATURES:
-Fits all Military Spec Built Lowers, AR-556, Mossberg MMR Hunter, Mossberg MMR Tactical, Mossberg MMR Tactical w/sights, SR-556, SR-556 Carbine, SR-556 VT, SR-556E
-3 lb pull weight
-Small pin
-Easy installation w/ no adjustments necessary
-100% true drop-in trigger
-No pin rotation
Other Features: 3 lbs pull non adjustable solid trigger small pin model (.156" pin) will fit most ar-15 rifles small pin fits almost all ar15 a few colt ar's use the large.176" pins all other ar-15's use the.156 trigger pins which is mil-spec
FEATURES:
-Fits all Military Spec Built Lowers, AR-556, Mossberg MMR Hunter, Mossberg MMR Tactical, Mossberg MMR Tactical w/sights, SR-556, SR-556 Carbine, SR-556 VT, SR-556E
-3 lb pull weight
-Large pin
-Easy installation w/ no adjustments necessary
-100% true drop-in trigger
-No pin rotation
Other Features: For pre-2005 colt ar-15's large (.168-.174) trigger pin large pin model (.168-.174) 3 lbs pull non adjustable solid trigger works only with older colt ar-15 rifles (pre-2005)
FEATURES
-Self-contained
-Drop-in unit ready to install in an AR-15 rifle
-2 pound pull
-Lightweight alloy for superior durability
-If you have a POLYMER LOWER, we recommend putting a small thin piece of aluminum underneath the
trigger to protect the polymer lower.
-Available in standard curved or straight
Other Features: Long first stage, 2lbs pull both stages, small pin model (.156" pin) will fit most ar-15 rifles small pin fits almost all ar15 a few colt ar's use the large.176" pins all other ar-15's use the.156 trigger pins which is mil-spec
FEATURES
-Self-contained
-Drop-in unit ready to install in an AR-15 rifle
-2 pound pull
-Lightweight alloy for superior durability
-If you have a POLYMER LOWER, we recommend putting a small thin piece of aluminum underneath the
trigger to protect the polymer lower.
-Available in standard curved or straight
Other Features: Short first stage, 2lbs pull both stages, small pin model (.156" pin) will fit most ar-15 rifles small pin fits almost all ar15 a few colt ar's use the large.176" pins all other ar-15's use the.156 trigger pins which is mil-spec
FEATURES
-3 pound pull weight
-Small pin
-Skeletonized Trigger
-Quick installation & no adjustments necessary
-Trigger module installs using your rifle's original hammer/trigger pins& the proprietary design eliminates
pin rotation & walkout
-If you have a polymer lower, we recommend putting a small thin piece of aluminum underneath the trigger
to protect the polymer lower.
Other Features: 3 lbs pull non adjustable skeletonized trigger small pin model (.156" pin) will fit most ar-15 rifles small pin fits almost all ar15 a few colt ar's use the large.176" pins all other ar-15's use the.156 trigger pins which is mil-spec
FEATURES
-Designed to work with all Model 870 shotguns
-Allows the user to have a clean, smooth, fully adjustable trigger pull
-Packaged with a sear, 3 pull weight springs & a hex head wrench
-Simply choose a spring (Red: 2.5-3lb>, White: 2-2.5lb or Blue: 1.5-2lb) & then fine tune the pull weight
with the hex head wrench for a precise setting
-The following Remingtons use the 870 Trigger fix:
-All Remington 870 Actions
-7600 series of pump action rifles
-Remington Model #878
-74 series pump action rifles
-1100 series of pump action shotguns
-Remington model 750 Woodmaster
-Remington 742 Semi Auto Rifle
-Remington 762 Rifle
Other Features: Inlcudes: sear/3 pull weight springs, (light,medium, heavy)/ hex head wrench/lifetime mfg warr/ & made in the usa fits 870/1100 shotguns, 7600 pump rifles, 74 series pump rifles, 742 semi-auto rifles, 750 woodmaster semi-auto rifle
FEATURES
-Self-contained drop in trigger
-Fits Ruger Model 77®-Tang Safety
-Good crisp 1.5 - 3.5 pound pull
-Lightweight alloy housing
-Made in the USA
-Nickel-plated
Other Features: Will not fit ruger mark ii, adjustable from 1.5-4lbs.
FEATURES
-Self-contained drop in trigger
-Fits Ruger Model 77®-Tang Safety
-Good crisp 1.5 - 3.5 pound pull
-Lightweight alloy housing
-Made in the USA
-Black
Other Features: Will not fit ruger mark ii, adjustable from 1.5-4lbs.
FEATURES
-Fits Remington 7 with safety
-Lightweight aluminum housing
-Two position, trigger blocking side safety
-Fully adjustable Sear Engagement & pull weight from 1.5-4lbs
-Nickel-Plated
Other Features: Includes safety nickel version adjustable 1.5-4lbs
FEATURES
-Fits Remington 7 with safety
-Lightweight aluminum housing
-Two position, trigger blocking side safety
-Fully adjustable Sear Engagement & pull weight from 1.5-4lbs
-Black
Other Features: Includes safety adjustable 1.5-4lbs
FEATURES:
| Type | Drop-In Trigger |
| Finish | Black |
| Material | Steel w / Aluminum Housing |
| Firearm Fit | Remington 700 |
| Style | Straight |
| Draw Weight | 3 lbs |
| Hand | Right |
Other Features: 3lb pull, straight trigger
FEATURES:
| Type | Drop-In Trigger |
| Finish | Green / Nickel |
| Material | Steel w / Aluminum Housing |
| Firearm Fit | Remington 700 |
| Style | Straight |
| Draw Weight | 3 lbs |
| Hand | Right |
Other Features: 3lb pull, nickle plated, straight trigger
FEATURES:
Drop-in, replacement trigger
All steel construction
1.5-4 lb pull
Other Features: 1.5-4lb pull
FEATURES:
| Type | Drop-In Trigger |
| Finish | Black / Green |
| Material | Steel w / Aluminum Housing |
| Firearm Fit | Remington 700 |
| Style | Thin Curved |
| Draw Weight | 3 lbs |
| Hand | Right |
Other Features: 3lb pull
FEATURES:
-Fast, ergonomic 49-degree throw for lighting fast Safety Manipulation
-Superior coatings for best-in-class fit & feel
-Precision-machined surfaces for smooth operation in any environment
-Precision machined, heat-treated steel, w/ replacement spring & carbo nitride coated safety plunger for
ultra-smooth operation w/ extremely positive engagement
-Made in the USA
FEATURES:
-Trigger allows you to become more accurate w/ your rifle
-No gunsmith needed, easy to install
-Adjustable for fine precision
-Ready for the range, right out of the box
Other Features: 3lb pull pre-set, adjusts from 1.5lbs to 4lbs
FEATURES:
| Finish | Black |
| Material | Steel w / Aluminum Housing |
| Firearm Fit | Remington 700 |
| Style | Straight |
| Draw Weight | 8 oz |
| Hand | Right |
Other Features: Straight shoe, 8oz-2lb trigger pull, designed for the long range rem 700 shooter, black
FEATURES:
| Finish | Nickel |
| Material | Steel w / Aluminum Housing |
| Firearm Fit | Remington 700 |
| Style | Curved |
| Draw Weight | 8 oz |
| Hand | Right |
Other Features: Curved shoe, 8oz-2lb trigger pull, designed for the long range rem 700 shooter, nickle plated
FEATURES:
| Finish | Black |
| Material | Steel w / Aluminum Housing |
| Firearm Fit | Remington 700 |
| Style | Curved |
| Draw Weight | 8 oz |
| Hand | Right |
Other Features: Curved shoe, 8oz-2lb trigger pull, designed for the long range rem 700 shooter, black
Other Features: Includes safety blued version 1.5-3.5 lb adjustable
FEATURES
-For Weatherby Mark V American/Japanese models
-Adjustable trigger pull weight from 1-4 pounds
-Fully adjustable for sear engagement
Other Features: 3lb pull
FEATURES
-Self-contained, 100% drop-in trigger, nickel coated
-Exceptionally smooth, crisp, two-stage trigger pull
-No gunsmithing, fitting, or adjusting required
-Trigger housing constructed of military-grade, 6061 T6 alloy
-CNC machined using state-of-the-art robotics
-Anodized for superior durability
Other Features: Adjustable from 8oz-1lb, drop-in trigger, two stage trigger pull with half pound first stage and one pound second stage
Other Features: Adjustable from 8oz-1lb, drop-in trigger, two stage trigger pull with half pound first stage and one pound second stage
FEATURES
-Self-contained drop in trigger
-Fits Ruger American rifles
-Good crisp 1.5 - 4 pound pull
-Lightweight aluminum housing is anodized for extra durability
-The sear is EDM cut & Teflon-nickel coated for maximum lubricity
-Made in the USA
Other Features: Adjustable from 1.5-4lbs