RCBS

Rcbs ar series die set w/taper crimp seater.30-06 spfld

FEATURES
- Caliber: .30-06 Springfield
- Feature a Small Base Sizer Die designed for semi-automatic firearms, and a Taper Crimp Seater Die
-The Small Base Sizer guarantees the cartridge will rechamber in AR-platform weapons
- 2 dies/set

Rcbs small base die set.30-06

FEATURES:
-.30-06 Springfield
-Forbottleneck type cases used in tight-chambering semi-automatic, pump or lever-action rifles
-Consists of a Small Base Sizer with an Expander-Decapping Unit & Regular Seater Die with Seater Plug
-The sizer resizes cases below SAAMI minimums, reducing the shoulder & body by a few thousandths
-It also deprimes the case
-The Seater Die has a built-in roll crimper to secure the bullet at the same time it's seated
-To seat bullets without crimping, simply unscrew the die until the crimp ring no longer engages the case
mouth

Rcbs fl die set.30-40 krag gp-a

FEATURES
-Caliber: .30-40 Krag
-This two-die set is intended for reloading bottleneck cases, & consists of a Full-Length Sizer Die
with an Expander-Decapping Unit, & a Seater Die with Bullet Seater Plug.
-The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions
-It sizes the outside of the case, de-primes & expands the neck to accept the bullet
-The die vents to prevent case damage caused by trapped air & for excessive lubricant
-Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing
-Then included Seater Die has a built-in roll crimper to secure the bullet at the same time as it's seated

Rcbs fl die set.280 rem.Gp-a

FEATURES
-Caliber: .280 Remington
-This two-die set is intended for reloading bottleneck cases, & consists of a Full-Length Sizer Die
with an Expander-Decapping Unit, & a Seater Die with Bullet Seater Plug.
-The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions
-It sizes the outside of the case, de-primes & expands the neck to accept the bullet
-The die vents to prevent case damage caused by trapped air & for excessive lubricant
-Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing
-Then included Seater Die has a built-in roll crimper to secure the bullet at the same time as it's seated

Rcbs fl die set 7x57mm mauser gp-a

FEATURES
-Caliber: 7X57MM Mauser
-This two-die set is intended for reloading bottleneck cases, & consists of a Full-Length Sizer Die
with an Expander-Decapping Unit, & a Seater Die with Bullet Seater Plug.
-The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions
-It sizes the outside of the case, de-primes & expands the neck to accept the bullet
-The die vents to prevent case damage caused by trapped air & for excessive lubricant
-Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing
-Then included Seater Die has a built-in roll crimper to secure the bullet at the same time as it's seated

Rcbs fl die set 7mm rem mag gp-a

FEATURES
-Caliber: 7mm Remington Magnum
-This two-die set is intended for reloading bottleneck cases, & consists of a Full-Length Sizer Die
with an Expander-Decapping Unit, & a Seater Die with Bullet Seater Plug.
-The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions
-It sizes the outside of the case, de-primes & expands the neck to accept the bullet
-The die vents to prevent case damage caused by trapped air & for excessive lubricant
-Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing
-Then included Seater Die has a built-in roll crimper to secure the bullet at the same time as it's seated

Rcbs fl die set.270 win gp-a

FEATURES
-Caliber: .270 Winchester
-This two-die set is intended for reloading bottleneck cases, & consists of a Full-Length Sizer Die
with an Expander-Decapping Unit, & a Seater Die with Bullet Seater Plug.
-The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions
-It sizes the outside of the case, de-primes & expands the neck to accept the bullet
-The die vents to prevent case damage caused by trapped air & for excessive lubricant
-Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing
-Then included Seater Die has a built-in roll crimper to secure the bullet at the same time as it's seated

Rcbs fl die set 6.5x55mm swedish mauser gp-a

FEATURES
-Caliber: 6.5mmx55 Swedish Mauser
-This two-die set is intended for reloading bottleneck cases, & consists of a Full-Length Sizer Die
with an Expander-Decapping Unit, & a Seater Die with Bullet Seater Plug.
-The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions
-It sizes the outside of the case, de-primes & expands the neck to accept the bullet
-The die vents to prevent case damage caused by trapped air & for excessive lubricant
-Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing
-Then included Seater Die has a built-in roll crimper to secure the bullet at the same time as it's seated

Rcbs fl die set.260 remington gp-a

FEATURES
-Caliber: .260 Remington
-This two-die set is intended for reloading bottleneck cases, & consists of a Full-Length Sizer Die
with an Expander-Decapping Unit, & a Seater Die with Bullet Seater Plug.
-The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions
-It sizes the outside of the case, de-primes & expands the neck to accept the bullet
-The die vents to prevent case damage caused by trapped air & for excessive lubricant
-Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing
-Then included Seater Die has a built-in roll crimper to secure the bullet at the same time as it's seated

Rcbs fl die set.264 win.Mag.Gp-a

FEATURES
-Caliber: .264 Winchester Magnum
-This two-die set is intended for reloading bottleneck cases, & consists of a Full-Length Sizer Die
with an Expander-Decapping Unit, & a Seater Die with Bullet Seater Plug.
-The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions
-It sizes the outside of the case, de-primes & expands the neck to accept the bullet
-The die vents to prevent case damage caused by trapped air & for excessive lubricant
-Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing
-Then included Seater Die has a built-in roll crimper to secure the bullet at the same time as it's seated

Rcbs fl die set.257 wby.Mag.Gp-a

FEATURES
-Caliber: .257 Weatherby Magnum
-This two-die set is intended for reloading bottleneck cases, & consists of a Full-Length Sizer Die
with an Expander-Decapping Unit, & a Seater Die with Bullet Seater Plug.
-The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions
-It sizes the outside of the case, de-primes & expands the neck to accept the bullet
-The die vents to prevent case damage caused by trapped air & for excessive lubricant
-Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing
-Then included Seater Die has a built-in roll crimper to secure the bullet at the same time as it's seated

Rcbs fl die set.25-06 rem gp-a

FEATURES
-Caliber: .25-06
-This two-die set is intended for reloading bottleneck cases, & consists of a Full-Length Sizer Die
with an Expander-Decapping Unit, & a Seater Die with Bullet Seater Plug.
-The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions
-It sizes the outside of the case, de-primes & expands the neck to accept the bullet
-The die vents to prevent case damage caused by trapped air & for excessive lubricant
-Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing
-Then included Seater Die has a built-in roll crimper to secure the bullet at the same time as it's seated

Rcbs neck sizer die set set.243 winchester

FEATURES:
-For bottleneck cases to be fired in bolt-action rifles only-specifically, cases fired out of a specific rifle &
neck-sized to go back into the same rifle
-The set consists of a Neck Sizer Die w/ an Expander-Decapping Unit, & a Seater Die w/ Bullet Seater Plug
-The Neck Sizer Die resizes the neck only & de-primes
-The included Seater Die has a built-in roll crimper to secure the bullet at the same time it's seated
-.243 Remington

Rcbs fl die set.243 win.Gp-a

FEATURES
-Caliber: .243 Winchester
-This two-die set is intended for reloading bottleneck cases, & consists of a Full-Length Sizer Die
with an Expander-Decapping Unit, & a Seater Die with Bullet Seater Plug.
-The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions
-It sizes the outside of the case, de-primes & expands the neck to accept the bullet
-The die vents to prevent case damage caused by trapped air & for excessive lubricant
-Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing
-Then included Seater Die has a built-in roll crimper to secure the bullet at the same time as it's seated

Rcbs ar series die set w/taper crimp seater.224 valkyrie

FEATURES:
-A must for progressive reloaders
-Features a Small Base Sizer Die designed for semi-automatic firearms, & a Taper Crimp Seater Die
-The Small Base Sizer guarantees the cartridge will rechamber in AR-platform weapons

Rcbs fl die set.224 valkyrie

FEATURES:
-Intended for reloading bottleneck cases, & consists of a Full-Length Sizer Die w/ an Expander-Decapping
Unit, & a Seater Die w/ Bullet Seater Plug
-The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions
-It sizes the outside of the case, de-primes & expands the neck to accept the bullet
-The included Seater Die has a built-in roll crimper to secure the bullet at the same time as it's seated

Rcbs small base sizer die only.223 remington

FEATURES
- Caliber: .223 Remington
- The Small Base Sizer Die is for bottleneck type cases used in tight-chambering semi-automatic,
pump or lever-action firearms.
- The sizer resizes cases below SAAMI minimums, reducing the shoulder & body by a few thousandths.
- It also de-primes the case.
- Note: Not recommended for ammunition used in bolt-action rifles

Rcbs neck sizer die only.223 remington

FEATURES:
-.223 Rem.
-Resizes the case neck only (it doesn't touch the shoulder or body) & deprimes

Rcbs ar series die set w/taper crimp seater.223 remington

FEATURES
- Caliber: .223 Remington/5.56mm
- Feature a Small Base Sizer Die designed for semi-automatic firearms, and a Taper Crimp Seater Die
-The Small Base Sizer guarantees the cartridge will rechamber in AR-platform weapons
- 2 dies/set

Rcbs small base die set.223 remington

FEATURES:
-.223 Rem.
-Forbottleneck type cases used in tight-chambering semi-automatic, pump or lever-action rifles
-Consists of a Small Base Sizer with an Expander-Decapping Unit & Regular Seater Die with Seater Plug
-The sizer resizes cases below SAAMI minimums, reducing the shoulder & body by a few thousandths
-It also deprimes the case
-The Seater Die has a built-in roll crimper to secure the bullet at the same time it's seated
-To seat bullets without crimping, simply unscrew the die until the crimp ring no longer engages the case
mouth

Rcbs neck sizer die set.223 remington

FEATURES:
-For bottleneck cases to be fired in bolt-action rifles only-specifically, cases fired out of a specific rifle &
neck-sized to go back into the same rifle
-The set consists of a Neck Sizer Die w/ an Expander-Decapping Unit, & a Seater Die w/ Bullet Seater Plug
-The Neck Sizer Die resizes the neck only & de-primes
-The included Seater Die has a built-in roll crimper to secure the bullet at the same time it's seated
-.223 Remington

Rcbs fl die set.223 remington gp-a

FEATURES
-Caliber: .223 Remington
-This two-die set is intended for reloading bottleneck cases, & consists of a Full-Length Sizer Die
with an Expander-Decapping Unit, & a Seater Die with Bullet Seater Plug.
-The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions
-It sizes the outside of the case, de-primes & expands the neck to accept the bullet
-The die vents to prevent case damage caused by trapped air & for excessive lubricant
-Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing
-Then included Seater Die has a built-in roll crimper to secure the bullet at the same time as it's seated

Rcbs fl die set.222 remington gp-a

FEATURES
-Caliber: .222 Remington
-This two-die set is intended for reloading bottleneck cases, & consists of a Full-Length Sizer Die
with an Expander-Decapping Unit, & a Seater Die with Bullet Seater Plug.
-The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions
-It sizes the outside of the case, de-primes & expands the neck to accept the bullet
-The die vents to prevent case damage caused by trapped air & for excessive lubricant
-Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing
-Then included Seater Die has a built-in roll crimper to secure the bullet at the same time as it's seated

Rcbs fl die set.220 swift gp-a

FEATURES
-Caliber: .220 Swift
-This two-die set is intended for reloading bottleneck cases, & consists of a Full-Length Sizer Die
with an Expander-Decapping Unit, & a Seater Die with Bullet Seater Plug.
-The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions
-It sizes the outside of the case, de-primes & expands the neck to accept the bullet
-The die vents to prevent case damage caused by trapped air & for excessive lubricant
-Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing
-Then included Seater Die has a built-in roll crimper to secure the bullet at the same time as it's seated

Rcbs neck sizer die set.22-250 remington

FEATURES:
-.22-250 Rem.
-Forbottleneck cases to be fired in bolt-action rifles only
-Includes a Neck Sizer Die with an Expander-Decapping Unit, & a Seater Die with Bullet Seater Plug
-Neck Sizer Die resizes the neck only (it doesn't touch the shoulder or body) & deprimes
-Seater Die has a built-in roll crimper to secure the bullet at the same time it's seated

Rcbs fl die set.204 ruger gp-a

FEATURES
-Caliber: .204 Ruger
-This two-die set is intended for reloading bottleneck cases, & consists of a Full-Length Sizer Die
with an Expander-Decapping Unit, & a Seater Die with Bullet Seater Plug.
-The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions
-It sizes the outside of the case, de-primes & expands the neck to accept the bullet
-The die vents to prevent case damage caused by trapped air & for excessive lubricant
-Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing
-Then included Seater Die has a built-in roll crimper to secure the bullet at the same time as it's seated

Rcbs fl die set.22 hornet gp-a

FEATURES
-Caliber: .22 Hornet
-This two-die set is intended for reloading bottleneck cases, & consists of a Full-Length Sizer Die
with an Expander-Decapping Unit, & a Seater Die with Bullet Seater Plug.
-The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions
-It sizes the outside of the case, de-primes & expands the neck to accept the bullet
-The die vents to prevent case damage caused by trapped air & for excessive lubricant
-Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing
-Then included Seater Die has a built-in roll crimper to secure the bullet at the same time as it's seated

Rcbs exp-decapping unit.30/7.62mm
Other Features: Features an expander rod and ball and a decapping pin.Its used for sizing dies to de-prime the case and expand the neck in cartridges

Rcbs lock ring assembly 1-1/2" for.50bmg
Other Features: This locking ring is designed specifically ffor 1.5-12 inch dies used for reloading.50bmg ,.416 barrett, and.460 steyr

Rcbs decapping pins-large 5pk

FEATURES
-Designed for collet-style rods for large primer cartridges, as well as for current
competition-style dies/rods, 7 TCU and 35 Whelen

Other Features: Will not fit reloader special dies

Rcbs decapping pins- small 5pk

FEATURES
-For pre-1990s collet-style rods designed for small-primers cartridges, as well as for
current competition-style dies/rods, X Die® mandrels, PPC and .357 Sig

Other Features: Will not fit reloader special dies

Rcbs auto prime feed tube assembly small

FEATURES:
-Stops misfires as greasy fingers never need to touch primers
-100 primer capacity
-Small primer only tube