Pearce Grips Inc.
![]()
FEATURES
-Springfield Armory XD Mod 2 series
-Adds capacity to 9mm (13 round mag), 40 Smith & Wesson
-Incorporates a similar texture to the factory grip
Other Features: Adds 1" in length, adds 2 extra rounds for 9mm, adds 1 extra round for.40s&w, will not fit.45acp
FEATURES
-Grip extension for Springfield XDM 9mm & .40 S&W
-Replaces the original base plate
-For use on XDM models with a rounded internal locking feature
*Will NOT work on XDM models with a slotted (square) internal locking feature
*Will NOT fit standard XD frames
Other Features: Adds grip length fits xdm full size & compact will not fit xd series for use on xdm models with a rounded internal locking feature.Will not work on models with a slotted (square) internal locking feature.
FEATURES
-Replace the magazine base plate & internal locking plate.
-Will add 1" in length & two rounds of additional capacity
-Fits XD45
Other Features: Adds 1" in length adds 2 extra rounds fits xd in.45acp only not compatible with xdm frames
FEATURES
-Replace the magazine base plate & retain all other factory components.
-Adds approximately 5/8" of additional gripping surface
-Blends with the contours & texture of the handgun giving a factory appearance
-Made from High Impact Polymer & withstand drop tests at temperatures from -20F - 350F
FEATURES
-Grip extension for Springfield XD 9mm, .357 Sig, & .45 Gap (sub-compact, compact & full size)
-Replaces the original base plate
-Does not alter the capacity of the magazine
-Adds approximately 5/8" additional length
*Will NOT fit .45 ACP models, or XDM frames
Other Features: Fits xd in 9mm,.40sw/.357 sig and.45 gap will not fit xdm models will not fit.45acp models
FEATURES
-Replace the magazine base plate & retain all other factory components.
-Fits Taurus TCP
Other Features: Adds 1/4" additional length, fits sig p365, more grip length to factory 12 round magazine
FEATURES
-Grip extension for the Beretta Nano
-Replaces the magazine floor plate
-Adds approximately 3/4" additional length
-Incorporates the factory checkering pattern
Other Features: Adds 3/4" additional length, fits beretta nano
FEATURES:
-Replaces the magazine floor plate providing two extra rounds of 9mm & one extra round of .40 cal
-Also adds 1" additional gripping surface for better control & comfort while also incorporation the factory
texture pattern
Other Features: Replaces the magzine floor plate adding 1" in grip length to the factory magazine , adds 2 rounds to 9mm and 1 round to.40
FEATURES
-M&P Shield 45 grip extension
-Replaces the magazine base plate on the M&P Shield 45
-Does not alter the capacity
-adds approximately 3/4" additional gripping surface
-Will only work on .45ACP
-Will not work on S & W Shield 9mm or .40 cal
Other Features: Adds 3/4" additional length, fits s&w m&p shield.45acp
FEATURES
-Grip extension for S&W M&P Shield 9mm & .40 cal.
-Replaces the original base plate
-Does not alter the capacity of the magazine
-Adds approximately 3/4" additional length
*Will NOT work on S&W M&P Shield .45 ACP
Other Features: Adds 3/4" additional length, fits s&w m&p shield 9mm & 40sw
FEATURES:
-Replaces the magazine base plate on the Springfield XDS/XDE/XDS MOD2 in 45ACP, 40 S&W & 9mm
single stack mags
-Adds one round capacity to the magazine & increases the grip length by approx. 7/8"
Other Features: Fits xd in 9mm,.40sw/.45, mod 2, will not fit xdm models adds one round,
FEATURES
-Grip extension for Kahr 9/40 Compacts
-Replaces the original base plate & internal locking plate
-Does not alter the capacity of the magazine
-Adds approximately 5/8" additional length
FEATURES
-2 extensions per package
-Grip extension for Ruger LCP
-Replaces the magazine base plate
-Retains all other factory components
-Does not alter the capacity of the magazine
-Adds approximately 1/2" additional length
*Will NOT fit any other .380 firearms
FEATURES
-Grip extension for Kahr P380/CW380
-Replaces the original base plate & internal locking plate
-Does not alter the capacity of the magazine
-Adds approximately 1/2" additional length
FEATURES
-Adds capacity to Mid & Full Size Glock high capacity magazines
-Replaces the original floor plate & internal locking plate
-Adds two rounds to a 9mm, two rounds to a 40SW & 357SIG, and one round to a 45GCP magazine
Other Features: Adds 3 rounds to 9mm adds 2 rounds to.40sw/357 sig adds 1 round to.45 gap
FEATURES
-Grip Frame Insert for Glock Sub Compact Size Models
-Fits models 26, 27, 33, & 39
-Uses a friction fit for retention
-Helps keep debris out of the magazine well
Other Features: Fits glock 26,27,33,39
FEATURES
-Grip Frame Insert for Glock Mid & Full Size Models
-Fits M17, 18, 19, 20, 21, 22, 23, 24, 31, 32, 34, 35, 37, & 38
-Will not fit any SF (Short Frame) nor any Generation 4 frames
-This unit installs in the bottom rear cavity of the frame utilizing the lanyard hole for retention
-Helps keep debris out of the magazine well
Other Features: Fits glock 17,18,19,20,21,22 23,24,25,31,32,34,35,37,38
FEATURES:
-Replaces the magazine base plate & retain all other factory components
-Does not alter the capacity
-Will only work on magazines equipped w/ double notches for the ambi magazine release
-Fits Gen 5 models 17, 19 & 34
Other Features: This magazine base plate will fill the semi-circular cutout in the glock gen5 m17, 19, and 34, the plate increases comfort and control
Other Features: Adds 5/8" additional length, fits gen5 glock 26-27, does not add capacity to mags
FEATURES
-Grip Frame Insert for Glock Sub Compact Size Models
-Fits models 26, 27, 33, & 39
-Only fits the new Generation 4 frames
-Uses a friction fit for retention
-Allows for use of factory interchangeable backstraps
-Helps keep debris out of the magazine well
Other Features: Fits sub-compact models 26, 27, 33, 39
FEATURES
-Adds capacity to Generation 4 Sub-Compact, Mid, & Full Size Glock high capacity magazines
-Replaces original floor plate & internal locking plate & adds two rounds to a 9mm,
two rounds to a 40SW & 357SIG, and one rounds to a 45GAP magazine
Other Features: Fits generation 4 guns fits full size, mid-size, and sub-compact models adds 1 round to 9mm/40/357 adds 1 round to 45gap
FEATURES
-Grip Frame Insert for Glock Mid & Full Size Models
-Fits M17, 18, 19, 22, 23, 24, 31, 32, 34, 35, 37, & 38
-Only fits new Generation 4 frames
-Will not fit 20 & 21 models
-Allows for use of factory interchangeable backstraps
-Helps keep debris out of the magazine well
Other Features: Does not fit g29 or g30
FEATURES
-Replace the magazine floor plate providing one extra round of capacity
-Will add 3/4" additional length
-Fits Glock 43
Other Features: Adds 3/4" in length, plus one capacity, fits glock 43
FEATURES
-Replace the magazine floor plate providing one extra round of capacity
-Will add 3/4" additional length
Other Features: Adds 3/4" in length, plus one capacity, fits glock 42