Manticore Arms
![]()
FEATURES:
-Includes rail, barrel nut, barrel nut wrench & 6 polymer grip panels
-AR-15 Aluminum Free Float rail system w/ ability to intermix Keymod, M-LOK & polymer grip panels
-8 QD sling swivel pockets-three on each side & two underneath
-13" Length
Other Features: M-lok and keymod-on the same rail, m-lok and keymod panels sold seperatly-6 mounting locations on the rail eight qd swivel pockets, ships with barrel nut, barrel nut wrench, and 6 polymer grip panels, made in usa
FEATURES:
-1/2x28 threads
-Designed specifically for the 24mm thread found on the muzzle of most AK-74 rifles
-18 ports distributed around the upper 270° of the device help stabilize & reduce exiting gas pressure
-Will clear any projectile up to .311" in diameter
-Machined from 8620 steel
-Black
Other Features: 24mm thread found on most ak-74 rifles, projectile up to.30 cal, 2.5" long, made in usa
FEATURES:
-Uses the proper solution to sealing off gas from the closed off ejection port-a gasket
-Ambidextrous
-Black
Other Features: Fits both tavor and x95 tavor, seals gas from closed off ejection port with a gasket, ambidextrous with intergal qd sling swivel pocket made in usa
FEATURES:
-1/2x28 threads
-Designed to provide recoil reduction & virtually eliminate muzzle rise
-18 ports distributed around the upper 270° of the device help stabilize & reduce exiting gas pressure
-Will clear any projectile up to .30 caliber safely
-Black
Other Features: Single detent notch, projectile up to.30 cal, 1.875" long, includes silicone washer, made in usa
FEATURES:
-Fits any AR-15, SIG 556 or other commonly threaded barrel
-1/2x28 threads
-Designed to provide recoil reduction & virtually eliminate muzzle rise
-18 ports distributed around the upper 270° of the device help stabilize & reduce exiting gas pressure
-Will clear any projectile up to .30 caliber safely
-Black
Other Features: 1/2x28 threads, projectile up to.30 cal, 1.875" long, includes crush washer, made in usa
FEATURES:
-5/8x24 threads
-Can be installed on any AR-10 or other 5/8x24 threaded barrel by using the integral wrench flats & the
included crush washer
-18 ports distributed around the upper 270° of the device help stabilize & reduce exiting gas pressure
-Will clear any projectile up to .30 caliber
-Machined from 8620 steel
-Black
Other Features: 5/8x24 threads, projectile up to.30 cal, 1.875" long, includes crush washer, made in usa
FEATURES:
-Allows you to mount picatinny accessories direct to your Transformer Rail
-Full picatinny w/ 11 slots across the whole surface
-6061 aluminum w/ a Type III harcoat anodizing
-Black
Other Features: Sold per each-one panel
FEATURES:
-Manticore Arms Transformer Rail handguard system Picatinny panels
-Includes attachment screws
-5-slot, black
-For use only w/ Transformer Rail handguard
Other Features: Sold per each-one panel
FEATURES:
-Folding charging handle that will work on either side of the Tavor
-Lowest possible profile when folded
-Automatically goes back to the stowage position after going forward
-Black
Other Features: Ambidextrous, made in usa
FEATURES:
-Allows you to shave over an inch of length of pull of your rifle w/out dropping into NFA territory
-Features a rubber pad that's curved to conform to your shoulder & gives better ergonomics & grip
-Black
Other Features: Reduces overall length, better ergonomics, only fits x95 model tavor, made in usa
FEATURES:
-Includes rail, barrel nut, barrel nut wrench & 6 polymer grip panels
-AR-15 Aluminum Free Float rail system w/ ability to intermix Keymod, M-LOK & polymer grip panels
-8 QD sling swivel pockets-three on each side & two underneath
-9" Length
Other Features: M-lok and keymod-on the same rail, m-lok and keymod panels sold seperatly-3 mounting locations on the rail eight qd swivel pockets, ships with barrel nut, barrel nut wrench, and 3 polymer grip panels, made in usa
FEATURES:
-Designed specifically for the 26x1.5 left hand thread found on the muzzle of the Yugoslavian M92 & M85
Krinkov rifles & PAP series of pistols
-8620 heat treated steel
-Black
Other Features: Flash hider, projectile up to.30 cal, fits yugo m92 and m85 krinkov rifles and pap series pistols, made in usa
FEATURES:
-Includes rail, barrel nut, barrel nut wrench & 6 polymer grip panels
-AR-15 Aluminum Free Float rail system w/ ability to intermix Keymod, M-LOK & polymer grip panels
-8 QD sling swivel pockets-three on each side & two underneath
-15" Length
Other Features: M-lok and keymod-on the same rail, m-lok and keymod panels sold seperatly-6 mounting locations on the rail eight qd swivel pockets, ships with barrel nut, barrel nut wrench, and 6 polymer grip panels, made in usa
FEATURES:
-1/2x28 threads
-For guns shooting 22 Long Rifle-9mm
-Machined from 8620 steel
-Black
Other Features: 1/2x28 threads, projectile up to 9mm, 1.75" long, made in usa
FEATURES:
-1/2x28 threads
-Designed specifically for the 26x1.5 left hand thread on the muzzle of the Yugoslavian M92 & M85 Krinkov
rifles & PAP series of pistols
-18 ports distributed around the upper 270° of the device help stabilize & reduce exiting gas pressure
-Will clear any projectile up to .311" in diameter
-Machined from 8620 steel
-Black
Other Features: 26x1.5lmm thread found on most yugo m92 and m85 krinkov rifles and pap series pistols, projectile up to.30 cal, 2.125" inches long made in usa
FEATURES:
-Fits Yugo PAP krink pistol
-Made with 4140 steel
-Includes detent pin, spring & roll pin
-Black
Other Features: Used on yugo pap krink pistol to hold muzzle device in place
FEATURES:
-The LUMA ( Lever, Upgraded Metal Ambidextrous), is a direct drop-in metal safety upgrade that works on
both left & right side of the gun
-6061 aluminum
-Harcoat anodized
Other Features: Fits both tavor and x95 tavor, drop-in upgrade, ambidextrous design, medium safety is same size as factory polymer safety includes 1 safety lever, manticore suggests installing one medium saftey lever and one slim per rifle, made in usa
FEATURES:
-The LUMA ( Lever, Upgraded Metal Ambidextrous), is a direct drop-in metal safety upgrade that works on
both left & right side of the gun
-6061 aluminum
-Harcoat anodized
Other Features: Fits both tavor and x95 tavor, drop-in upgrade, ambidextrous design, includes 1 safety lever, manticore suggests installing one medium saftey lever and one slim per rifle, made in usa
FEATURES:
-Designed specifically for AK's w/ the 14x1L muzzle threading
-8620 heat treated steel
-Will clear any projectile 0.311" in diameter or smaller
-Black
Other Features: Flash hider, projectile up to.30 cal, 2.25" long, includes crush washer, made in usa
FEATURES:
-Designed specifically for .223 caliber/5.56 weapons w/ a 1/2 x 28 tpi muzzle thread
-8620 heat treated steel
-Black
Other Features: Flash hider, projectile up to.30 cal, 2.25" long, includes crush washer, made in usa
FEATURES:
-Designed specifically for .30 caliber/7.62 weapons w/ a 5/8x24 tpi muzzle thread
-8620 heat treated steel
-Black
Other Features: Flash hider, projectile up to.30 cal, 2.25" long, includes crush washer, made in usa
Other Features: All nfa rules apply weight: 12 oz.Length: 9.125"
- 1