Evolution Gun Works
![]()
FEATURES:
-Machined from 6061-T6 extruded aluminum
-Matte black finish
-For Winchester 70 WSM
-0 MOA
-Center Spread: 3.514"*
-Overall Length: 6.670"
-Mounting Hardware: Hex head screws & wrench provided
-Installation: EGW recommends 20 inch lbs. of torque & a drip of blue Loctite
*The center spread is the distance between the two middle holes, center to center, on your receiver
Other Features: Made in usa
FEATURES:
-Machined from 6061-T6 extruded aluminum
-Matte black finish
-For Winchester 70 Long Action (Pre '64)
-20 MOA
-Center Spread: 3.805"*
-Overall Length: 7.064"
-Mounting Hardware: Hex head screws & wrench provided
-Installation: EGW recommends 20 inch lbs. of torque & a drip of blue Loctite
*The center spread is the distance between the two middle holes, center to center, on your receiver
Other Features: Made in usa
FEATURES:
-Machined from 6061-T6 extruded aluminum
-Matte black finish
-For Winchester 70 Long Action (Pre '64)
-0 MOA
-Center Spread: 3.805"*
-Overall Length: 7.064"
-Mounting Hardware: Hex head screws & wrench provided
-Installation: EGW recommends 20 inch lbs. of torque & a drip of blue Loctite
*The center spread is the distance between the two middle holes, center to center, on your receiver
Other Features: Made in usa
FEATURES:
-Machined from 6061-T6 extruded aluminum
-Matte black finish
-Will work with any short action round back Savage rifle with an ejection port
-20 MOA
-Center Spread: 3.930"*
-Overall Length: 6.670"
-Mounting Hardware: Hex head screws & wrench provided
-Installation: EGW recommends 20 inch lbs. of torque & a drip of blue Loctite
*The center spread is the distance between the two middle holes, center to center, on your receiver
Other Features: Made in usa, this savage base will work with any short action round back savage with an ejection port
FEATURES:
-Machined from 6061-T6 extruded aluminum
-Matte black finish
-For Remington 700 Short Action, 722, 40x
-0 MOA
-Center Spread: 3.627"*
-Overall Length: 6.276"
-Height: .400"
-Mounting Hardware: Hex head screws & wrench provided
-Installation: EGW recommends 20 inch lbs. of torque & a drip of blue Loctite
-Will not fit Howa 1500 or Weatherby Vanguard
*The center spread is the distance between the two middle holes, center to center, on your receiver.
Other Features: Made in usa
Other Features: Made in usa, 15 moa
FEATURES:
-Machined from 6061-T6 extruded aluminum
-Matte black finish
-For Remington 700 Short Action, 722, 40x
-20 MOA
-Center Spread: 4.485"*
-Overall Length: 7.064"
-Height: .395"
-Mounting Hardware: Hex head screws & wrench provided
-Installation: EGW recommends 20 inch lbs. of torque & a drip of blue Loctite
-Will not fit Howa 1500 or Weatherby Vanguard
*The center spread is the distance between the two middle holes, center to center, on your receiver.
Other Features: Made in usa
FEATURES:
-Aluminum
-Matte silver
-Fits: short action Remington 700 rifles
-Length: 6.276"
-Center spread: 3.627"
-Height: .4"
-20MOA
-Mounting hardware included
Other Features: Made in usa
FEATURES:
-Machined from 6061-T6 extruded aluminum
-Matte black finish
-For Remington 700 Long Action, 740, 40x
-0 MOA
-Center Spread: 4.485"*
-Overall Length: 7.064"
-Height: .395"
-Mounting Hardware: Hex head screws & wrench provided
-Installation: EGW recommends 20 inch lbs. of torque & a drip of blue Loctite
-Will not fit Howa 1500 or Weatherby Vanguard
*The center spread is the distance between the two middle holes, center to center, on your receiver.
Other Features: Made in usa
FEATURES:
-Aluminum
-Matte silver
-Picatinny style
-Fits: Remington 700
-20MOA
-Mounting hardware included
Other Features: Made in usa
Other Features: Made in usa, remington xp/xr 100, model 7 3-hole short action picatinny rail scope mount 0 moa
FEATURES:
-Solid 6061 T6 Extruded Aluminum
-Matte Black
-5.48" Mount
-Fits Remington XP/XR 100, Model 7 Short Action
Other Features: Made in usa, remington xp/xr 100, model 7 4-hole short action picatinny rail scope mount 0 moa
Other Features: Made in usa, remington 660/600 mohawk picatinny rail scope mount, 0 moa
FEATURES:
-Aluminum
-Matte black
-Picatinny/Weaver style
-Fits: Remington 4, 6, 750, 7600 & Benelli auto
-Mounting hardware included
Other Features: Made in usa, also fits benelli auto, super black eagle, m2, weaver 93 scope mount
FEATURES:
-Aluminum
-Matte black
-Fits: Remington 740, 742, & 760rifles and Ithaca 37 and Weaver 62
-Length: 5.488"
-Center spread: 1.648"
-Height: .4"
-Mounting hardware included
Other Features: Made in usa, weaver 62 scope mount
FEATURES:
-Machined from 6061-T6 extruded aluminum
-Matte black finish
-For Remington 870
-0 MOA
-Overall Length: 5.488"
-Mounting Hardware: Hex head screws & wrench provided
-Installation: EGW recommends 20 inch lbs. of torque & a drip of blue Loctite
Other Features: Made in usa
FEATURES:
-Machined from 6061-T6 extruded aluminum
-Matte black finish
-For Remington 1100/11-87
-Center Spread: 1.48"*
-Overall Length: 5.488"
-Mounting Hardware: Hex head screws & wrench provided
-Installation: EGW recommends 20 inch lbs. of torque & a drip of blue Loctite
*The center spread is the distance between the two middle holes, center to center, on your receiver.
Other Features: Made in usa
FEATURES:
-Aluminum
-Matte black
-Fits:short action Remington 783
-Length: 6.670"
-Center spread: 3.242"
-Height: .4"
-Mounting hardware included
Other Features: Made in usa
FEATURES:
-Aluminum
-Matte black
-Fits:long action Remington 783
-Length: 7.064"
-Center spread: 3.54"
-Height: .4"
-Mounting hardware included
Other Features: Made in usa
FEATURES:
-Machined from 6061-T6 extruded aluminum
-Matte black finish
-Will work with any short action round back Savage rifle with an ejection port
-0 MOA
-Center Spread: 3.930"*
-Overall Length: 6.670"
-Mounting Hardware: Hex head screws & wrench provided
-Installation: EGW recommends 20 inch lbs. of torque & a drip of blue Loctite
*The center spread is the distance between the two middle holes, center to center, on your receiver
Other Features: Made in usa, this savage base will work with any short action round back savage with an ejection port
FEATURES:
-Solid 6061 T6 Extruded Aluminum
-Matte Black
-5.8" Mount
-Fits Savage 93
Other Features: Made in usa, for savage 93, 1-5/8" ejection port
FEATURES:
-Machined from 6061-T6 extruded aluminum
-Matte black finish
-For Winchester 70 Short Action
-0 MOA
-Center Spread: 3.259"*
-Overall Length: 6.276"
-Mounting Hardware: Hex head screws & wrench provided
-Installation: EGW recommends 20 inch lbs. of torque & a drip of blue Loctite
*The center spread is the distance between the two middle holes, center to center, on your receiver
Other Features: Made in usa
Other Features: Made in usa, fits savage a17/a22 mag, 20moa
FEATURES:
-Aluminum
-Matte black
-Fits: Savage A17
-Length: 5.882"
-Center spread: 3.181"
-Height: .4"
-Mounting hardware included
Other Features: Made in usa, fits savage a17
FEATURES:
-Machined from 6061-T6 extruded aluminum
-Matte black finish
-For Savage 42
-Mounting Hardware: Hex head screws & wrench provided
-Installation: EGW recommends 20 inch lbs. of torque & a drip of blue Loctite
Other Features: Made in usa
FEATURES:
-Machined from 6061-T6 extruded aluminum
-Matte black finish
-For Savage Axis/Axis II (formerly the Savage Edge) rifle
-20 MOA
-Center Spread: 4.321"*
-Overall Length: 7.458"
-Mounting Hardware: Hex head screws & wrench provided
-Installation: EGW recommends 20 inch lbs. of torque & a drip of blue Loctite
*The center spread is the distance between the two middle holes, center to center, on your receiver
Other Features: Made in usa
FEATURES:
-Aluminum
-Matte silver
-Fits: Savage Axis (formerly Savage Edge) rifle
-Length: 7.458"
-Center spread: 4.31"
-Height: .4"
-Mounting hardware included
Other Features: Made in usa
FEATURES:
-Aluminum
-Matte black
-Fits: Savage 212
-Length: 7.458"
-Center spread: 4.629"
-Height: .4"
-Mounting hardware included
Other Features: Made in usa,
Other Features: Made in usa, for savage 93, 1-5/8" ejection port, 20 moa
FEATURES:
-Machined from 6061-T6 extruded aluminum
-Matte black finish
-For Savage 220 slug gun
-0 MOA
-Center Spread: 4.630"*
-Overall Length: 6.850"
-Mounting Hardware: Hex head screws & wrench provided
-Installation: EGW recommends 20 inch lbs. of torque & a drip of blue Loctite
-This mount does not fit the 212
*The center spread is the distance between the two middle holes, center to center, on your receiver
Other Features: Made in usa, this savage base was designed especially for the savage 220 slug gun.
FEATURES
-Picatinny-style base
-Silver Anodized finish
-Designed especially for the Savage 220 slug gun
-Domestic 6061 T6 Extruded Aluminum
-Silver Anodized
-Comes standard with a bevel on both sides making it ambidextrous
-Hex head screws & wrench provided
-Center spread: 4.63"
-Overall length: 6.85"
Other Features: Made in usa, this savage base was designed especially for the savage 220 slug gun.Silver base