Bravo Company Mfg.
![]()
FEATURES
-Stock Assembly
-Mod 0
-AR-15
-Flat Dark Earth
-New patent pending latch reinvents the stock's interface with a mil-spec receiver extension, providing the user with superior strength when dropped or when mortaring malfunction clearance drill.
-Snag free Design. No sharp edges prevent tangling of the rifle with the shooter's sling, molle gear, or other kit.
-Modular VBOST (Vehicle Borne Operations Sling Tab)- This tab interfaces with the shooter's riggers' band or bungee to secure the shooter's sling against the stock when the carbine is not in use. Increasingly, this is the most common application when operating inside a vehicle.
-2 different types of ambidextrous sling mounting options, including QD swivel sockets
-Integrated color matched rubber butt pad for secure shoulder placement, along with increased durability
-Simple modular design. 5 parts, and 1 screw allow for modular adaption of future stock options and configurations.
FEATURES
-Gunfighter Vertical Grip
-Picatinny
-Flat Dark Earth
-Mounted in forward angle increases rigidity of forearm, while providing more natural wrist angle when grabbing the vertical grip.
-Mounted in reverse angle to increase control when grabbing handguard and vertical grip.
-Flat sides give better yaw control during firing and non-firing manipulations
-Aggressive texture and generous storage volume combined with modular design to allow improvements and adaptation in the future.
-Cross bolt designed to work with improvised tools (such as a quarter) allow for easy adjustment or re-tightening
-Hinged trap door offering storage inside the grip with a water resistant rubber gasket
-Reversible clamps allow user to setup fasteners to reside on either side
-Spring-loaded clamp makes installation and removal easier
-Made in the U.S.A.
FEATURES
-Trigger Guard
-Mod 0
-AR-15
-Flat Dark Earth
-Ergonomically correct shape and contour
-No sharp edges, which enhances shooter's comfort
-Compatible with "duck-billed" grips
-Made of impact resistant polymer
-Made in USA
-Professional installation by a qualified gunsmith is required
Other Features: Compatible with duck-billed grips
FEATURES
-Trigger Guard
-Mod 0
-AR-15
-Foliage Green
-Ergonomically correct shape and contour
-No sharp edges, which enhances shooter's comfort
-Compatible with "duck-billed" grips
-Made of impact resistant polymer
-Made in USA
-Professional installation by a qualified gunsmith is required
Other Features: Compatible with duck-billed grips
FEATURES
-Trigger Guard
-Mod 0
-AR-15
-Wolf Gray
-Ergonomically correct shape and contour
-No sharp edges, which enhances shooter's comfort
-Compatible with "duck-billed" grips
-Made of impact resistant polymer
-Made in USA
-Professional installation by a qualified gunsmith is required
Other Features: Compatible with duck-billed grips
FEATURES:
Material: Polymer
Finish: Flat Dark Earth
Size: For Mil-Spec tube
Snag free Design
Modular VBOST (Vehicle Borne Operations Sling Tab)
Longer overall length to fit longer "MilSpec" diameter AR10/A5/Intermediate receiver extensions
Storage compartment located in the toe of the stock, accessible through butt pad
Built in rubber butt pad for secure shoulder placement
Other Features: Storage compartment located in the toe of the stock.More pronounced sopmod cheekweld.Built in rubber butt pad for secure shoulder placement.
FEATURES
-Pistol Grip
-Mod 2 (Modular)
-Black
-A new AR15 grip refined for the modern warfighter, optimized for modern weapon manipulation techniques.
-Hinged trap door with interior storage compartment and water resistant rubber gasket.
-Reduced grip angle keeps wrist in line with trigger for improved ergonomics and trigger control.
-Interchangeable inserts for either a smooth front strap or a 'duckbill' to cover trigger guard gap.
-Interchangeable backstraps for various hand sizes, weapons, and grip positions.
-Up to a quarter of an inch wider than the BCMGUNFIGHTER Mod 0 and Mod 1 grips. Same wider profile as the BCM's GUNFIGHTER Grip Mod 3.
-Made in the USA and manufactured from high quality impact resistant polymers
Other Features: Interchangeable backstraps
FEATURES
-Pistol Grip
-Mod 2 (Modular)
-Flat Dark Earth
-A new AR15 grip refined for the modern warfighter, optimized for modern weapon manipulation techniques.
-Hinged trap door with interior storage compartment and water resistant rubber gasket.
-Reduced grip angle keeps wrist in line with trigger for improved ergonomics and trigger control.
-Interchangeable inserts for either a smooth front strap or a 'duckbill' to cover trigger guard gap.
-Interchangeable backstraps for various hand sizes, weapons, and grip positions.
-Up to a quarter of an inch wider than the BCMGUNFIGHTER Mod 0 and Mod 1 grips. Same wider profile as the BCM's GUNFIGHTER Grip Mod 3.
-Made in the USA and manufactured from high quality impact resistant polymers
Other Features: Interchangeable backstraps
FEATURES
-Pistol Grip
-Mod 3
-Flat Dark Earth
-Reduced angle for improved ergonomics and trigger control
-Hinged trap door offering storage inside the grip with a water resistant rubber gasket
-Each grip features an extended forward tang to close the gap between the trigger guard and pistol grip, and a high rise "beavertail" style back strap
-Up to a quarter of an inch wider than the BCMGUNFIGHTER Mod 0 and Mod 1 grips
-Made in the USA and manufactured from high quality impact resistant polymers
-Each grip test fit to ensure proper function (may display attributes consistent with this QC process)
FEATURES
-Pistol Grip
-Mod 3
-Foliage Green
-Reduced angle for improved ergonomics and trigger control
-Hinged trap door offering storage inside the grip with a water resistant rubber gasket
-Each grip features an extended forward tang to close the gap between the trigger guard and pistol grip, and a high rise "beavertail" style back strap
-Up to a quarter of an inch wider than the BCMGUNFIGHTER Mod 0 and Mod 1 grips
-Made in the USA and manufactured from high quality impact resistant polymers
-Each grip test fit to ensure proper function (may display attributes consistent with this QC process)
FEATURES
-Slim, comfortable & lightweight
-Three, six-hole KeyMod mounting surfaces
-Aluminum heat shield
-Will only fit a round carbine type handguard retaining cap
-Flat Dark Earth
Other Features: Polymer, drop-in, fits carbine length gas systems and mil-spec front sight base
FEATURES
-Slim, comfortable & lightweight
-Three, six-hole KeyMod mounting surfaces
-Aluminum heat shield
-Will only fit a triangle M16 type handguard retaining cap
-Black
Other Features: Polymer, drop-in, fits mid-length gas systems and mil-spec front sight base
FEATURES
-Slim, comfortable & lightweight
-Three, six-hole KeyMod mounting surfaces
-Aluminum heat shield
-Will only fit a triangle M16 type handguard retaining cap
-Flat Dark Earth
Other Features: Polymer, drop-in, fits mid-length gas systems and mil-spec front sight base
FEATURES
-PNT Trigger Assembly
-AR-15
-Polished Nickel Teflon
-Trigger and Hammer are precision machined Mil-Spec AIS18620 per the USGI TDP
-Not to be confused with MIM commercial market parts
-Small Pin Trigger and Hammer Pins (.156"/.157")
-Three step heat treated and case hardened
-Hand polished with 300% friction reduction
-Teflon Coating
-Made in USA
Other Features: Polished sear, nickel finish for reduced creep and grittiness, teflon to reduce friction
FEATURES
-Pistol Grip
-Mod 1
-Flat Dark Earth
-Reduced angle for improved ergonomics
-Hinged trap door offering storage inside the grip with a water resistant rubber gasket
-Each grip includes both an extended modular insert to close the gap between the trigger guard and pistol grip, and a smooth modular insert for use with some rifles with larger built in trigger guards. (User can decide which one to install)
-Made in the USA and manufactured from high quality impact resistant polymers.
-Test fit to ensure proper function (may display attributes consistent with this QC process)
FEATURES
-Fits standard 1913 Picatinny rail interface
-Accepts standard QD push button sling swivels
-Non-rotational locking interface
-Requires two lugs & one 1913 slot to mount properly
-All steel construction
-Includes hex wrench
Other Features: Fits standard 1913 picatinny rails, accepts qd sling swivels (not included), non-rotational interface
FEATURES
-Light Mount Modular
-KeyMod
-For Surefire Scout
-Fully Ambidextrous
-Low profile and sleek design
-Durable Aluminum
-Can be mounted flush or offset to the right or left
-Matte Black Finish
Other Features: For use with surefire's scout light mounting interface
Kit Includes:
-Extractor made to USGI specs (shot peened)
-Extractor pin
-BCM extractor spring (chrome silicon, heat treated & stress relieved, shot peened)
-3 USGI gas rings
-Crane Ind O-ring (Mil-Spec)
-Black extractor insert
Other Features: Extractor, extractor pin, extractor spring, usgi gas rings, o ring/extractor insert
FEATURES
-Gunfighter Vertical Grip Mod 3
-KeyMod
-Black
-Low-profile length for increased mobility and decreased "snag" factor.
-The forward angle increases the rigidity of the forearm, while providing a more natural wrist angle.
-Anchor and bolt system offersa simple robust design, while maintaining a lightweight 1.9 ounces.
-Flat sides give better yaw control to the shooter during firing and non-firing manipulations
-Can be mounted in reverse angle to increase control when grabbing handguard and grip
-Made in the U.S.A.
FEATURES
-Gunfighter Vertical Grip Mod 3
-KeyMod
-Flat Dark Earth
-Low-profile length for increased mobility and decreased "snag" factor.
-The forward angle increases the rigidity of the forearm, while providing a more natural wrist angle.
-Anchor and bolt system offersa simple robust design, while maintaining a lightweight 1.9 ounces.
-Flat sides give better yaw control to the shooter during firing and non-firing manipulations
-Can be mounted in reverse angle to increase control when grabbing handguard and grip
-Made in the U.S.A.
FEATURES
-Gunfighter Vertical Grip Short
- Fits Picatinny Rails
-Flat Dark Earth
-Low-profile length for increased mobility and decreased "snag" factor.
-The forward angle increases the rigidity of the forearm, while providing a more natural wrist angle.
-Aggressive texture and storage volume combined with modular design allows for improvements and adaptation in the future.
-Included isa cross bolt designed to work with improvised tools to allow for easy adjustment or re-tightening, reversible clamps which allows users to set up fasteners to reside on either side
-Spring-loaded clamps makes installation and removal easier
FEATURES
-Gunfighter Vertical Grip Short
-Quick Detachable KeyMod Version
-Black
-Quick detachable, Tool-less, Direct Mount KeyMod interface
-Low-profile length for increased mobility and decreased "snag" factor.
-The forward angle increases the rigidity of the forearm, while providing a more natural wrist angle.
-Can be mounted in reverse angle to increase control when grabbing handguard and grip
-Flat sides give better yaw control during firing and non-firing manipulations
-Aggressive texture
-Storage inside the grip
-Requires 3 KeyMod attachment hole mounting points
-Spring-loaded clamps makes installation and removal easier
-Made in the U.S.A.
FEATURES
-Gunfighter Vertical Grip Short
-KeyMod
-Flat Dark Earth
-Quick detachable, Tool-less, Direct Mount KeyMod interface
-Low-profile length for increased mobility and decreased "snag" factor.
-The forward angle increases the rigidity of the forearm, while providing a more natural wrist angle.
-Can be mounted in reverse angle to increase control when grabbing handguard and grip
-Flat sides give better yaw control during firing and non-firing manipulations
-Aggressive texture
-Storage inside the grip
-Requires 3 KeyMod attachment hole mounting points
-Spring-loaded clamps makes installation and removal easier
-Made in the U.S.A.
FEATURES
-Rail section is made of hard anodized aircraft aluminum alloy
-Made to the mil-standard 1913 picatinny arsenal specs
-Features a snag resistant design, while retaining Mil-standards
-M-Lok® compatible
-3"
FEATURES
-KMR Alpha
-7"
-Black
-KeyMod Free Float Handguard
-100% aluminum
-Lightweight and durable. Also featuring a proprietary patent pending mounting, indexing and lock up system that mitigates 12:00 rail movement under heat generated from the barrel nut.
-Handguard alone weighs 4.5 oz
-1.3" Inner Diameter
-1.5" OUTSIDE flat to flat
-Handguard flares forward (towards muzzle end) at the 3 and 9 O'Clock positions approximately 1/4"
-Actual length when measured to flare is 7.39"
-The KMR barrel nut will fit over all mil-spec diameter barrels (max of 1")
-Mounting hardware, 2.4 oz, for a total of 6.9 oz on a 7" rail
-The KMR Alpha is hardcoat anodized for corrosion resistance as well as to maintain a non-reflective finish.
-Includes BCM KeyMod Sling Mount
NOTE: NYLON/POLYMER PICATINNY RAIL SECTIONS ARE FOR NON-LOAD BEARING ACCESSORIES ONLY. ALUMINUM PICATINNY RAIL SECTIONS RECOMMENDED FOR LOAD BEARING. DO NOT EXCEED 20 IN/LBS WHEN SECURING KEYMOD FASTENERS ON POLYMER ACCESSORIES. ALUMINUM PICATINNY RAIL SECTIONS MAY BE TORQUED TO 30 IN/LBS
Other Features: Aluminum alloy
FEATURES
-KMR Alpha
-8"
-Black
-KeyMod Free Float Handguard
-100% aluminum
-Lightweight and durable. Also featuring a proprietary patent pending mounting, indexing and lock up system that mitigates 12:00 rail movement under heat generated from the barrel nut.
-Handguard alone weighs 4.9 oz
-1.3" Inner Diameter
-1.5" OUTSIDE flat to flat
-Handguard flares forward (towards muzzle end) at the 3 and 9 O'Clock positions approximately 1/4"
-Actual length when measured to flare is 8.39"
-The KMR barrel nut will fit over all mil-spec diameter barrels (max of 1")
-Mounting hardware, 2.4 oz, for a total of 7.3 oz on a 7" rail
-The KMR Alpha is hardcoat anodized for corrosion resistance as well as to maintain a non-reflective finish.
-Includes BCM KeyMod Sling Mount
NOTE: NYLON/POLYMER PICATINNY RAIL SECTIONS ARE FOR NON-LOAD BEARING ACCESSORIES ONLY. ALUMINUM PICATINNY RAIL SECTIONS RECOMMENDED FOR LOAD BEARING. DO NOT EXCEED 20 IN/LBS WHEN SECURING KEYMOD FASTENERS ON POLYMER ACCESSORIES. ALUMINUM PICATINNY RAIL SECTIONS MAY BE TORQUED TO 30 IN/LBS
Other Features: Aluminum alloy
FEATURES
-KMR Alpha
-9"
-Black
-KeyMod Free Float Handguard
-100% aluminum
-Lightweight and durable. Also featuring a proprietary patent pending mounting, indexing and lock up system that mitigates 12:00 rail movement under heat generated from the barrel nut.
-Handguard alone weighs 5.6 oz
-1.3" Inner Diameter
-1.5" OUTSIDE flat to flat
-Handguard flares forward (towards muzzle end) at the 3 and 9 O'Clock positions approximately 1/4"
-Actual length when measured to flare is 9.4"
-The KMR barrel nut will fit over all mil-spec diameter barrels (max of 1")
-Mounting hardware, 2.4 oz, for a total of 8.0 oz on a 9" rail
-The KMR Alpha is hardcoat anodized for corrosion resistance as well as to maintain a non-reflective finish.
-Includes BCM KeyMod Sling Mount
NOTE: NYLON/POLYMER PICATINNY RAIL SECTIONS ARE FOR NON-LOAD BEARING ACCESSORIES ONLY. ALUMINUM PICATINNY RAIL SECTIONS RECOMMENDED FOR LOAD BEARING. DO NOT EXCEED 20 IN/LBS WHEN SECURING KEYMOD FASTENERS ON POLYMER ACCESSORIES. ALUMINUM PICATINNY RAIL SECTIONS MAY BE TORQUED TO 30 IN/LBS
Other Features: Aluminum alloy
FEATURES
-Black
-5 pack
-Made to fit ALL KeyMod mounting surfaces with seven (7) consecutive KeyMod slots
-Ultra-slim and radiused surface to allow a "round" handguard feeling
-Aggressive non-slip & non-reflective surface
-Ventilated for cooling
-Bi-directional locking tabs on either end
-5.55" x .625" x .10"
-Can be cut to any length
-Made in USA
FEATURES
-Flat dark earth
-5 pack
-Made to fit ALL KeyMod mounting surfaces with seven (7) consecutive KeyMod slots
-Ultra-slim and radiused surface to allow a "round" handguard feeling
-Aggressive non-slip & non-reflective surface
-Ventilated for cooling
-Bi-directional locking tabs on either end
-5.55" x .625" x .10"
-Can be cut to any length
-Made in USA
FEATURES
-Gunfighter Light Mount
-1"
-KeyMod Version
-Mod 0
-Black
-Fully Ambidextrous mounting; either the left or the right side of the rail system
-Fits majority of popular 1-inch round body tactical light systems
-Design to mount on the 1:30 or 10:30 o'clock (upper 45 degree) rail positions
-Strong Aluminum construction
-Intently designed to below-profile and snag-free
-Patent Pending anchoring system
-Minimal added weight, 1 oz
Other Features: Fits most 1" tactical lights
FEATURES
-Fully ambidextrous
-Fits majority of popular 1" round body tactical light systems
-Design to mount on the 1:30 or 10:30 o'clock (upper 45° degree) rail positions
-Durable Aluminum construction
-Intently designed to be low-profile & snag-free
Other Features: Fits most 1" tactical lights