Bravo Company Mfg.

Bcm angled grip wolf gray fits picatinny rails

FEATURES
-Wolf Gray
-Gunfighter Angled Grip
-Fits Picatinny 1913 rail version
-Kinesthetic Angled Grip (KAG) is designed to complement modern shooting grips
-Forward rake gives positive retention when using "C-clamp" (thumb over bore) method of handguard support
-Works as a rest for supported firing positions
-Slight angle w/o significant bulk adds just the right amount of relief to the wrist w/o substantially increasing the girth of the handguard
-Small profile is just enough to get repeatable hand positon on weapon forend
-Innovative patent pending attachment method allows for robust clamping and alignment w/ minimal hardware and slender accessory size
-Textured in front and back for positive engagement
-Made in the U.S.A. from high quality, impact resistant polymers

Bcm stock mod 0 fde fits ar-15 mil-spec

FEATURES
-Stock Assembly
-Mod 0
-AR-15
-Flat Dark Earth
-New patent pending latch reinvents the stock's interface with a mil-spec receiver extension, providing the user with superior strength when dropped or when mortaring malfunction clearance drill.
-Snag free Design. No sharp edges prevent tangling of the rifle with the shooter's sling, molle gear, or other kit.
-Modular VBOST (Vehicle Borne Operations Sling Tab)- This tab interfaces with the shooter's riggers' band or bungee to secure the shooter's sling against the stock when the carbine is not in use. Increasingly, this is the most common application when operating inside a vehicle.
-2 different types of ambidextrous sling mounting options, including QD swivel sockets
-Integrated color matched rubber butt pad for secure shoulder placement, along with increased durability
-Simple modular design. 5 parts, and 1 screw allow for modular adaption of future stock options and configurations.

Bcm trigger guard mod 0 fde fits ar-15

FEATURES
-Trigger Guard
-Mod 0
-AR-15
-Flat Dark Earth
-Ergonomically correct shape and contour
-No sharp edges, which enhances shooter's comfort
-Compatible with "duck-billed" grips
-Made of impact resistant polymer
-Made in USA
-Professional installation by a qualified gunsmith is required

Other Features: Compatible with duck-billed grips

Bcm vertical grip fde fits picatinny rails

FEATURES
-Gunfighter Vertical Grip
-Picatinny
-Flat Dark Earth
-Mounted in forward angle increases rigidity of forearm, while providing more natural wrist angle when grabbing the vertical grip.
-Mounted in reverse angle to increase control when grabbing handguard and vertical grip.
-Flat sides give better yaw control during firing and non-firing manipulations
-Aggressive texture and generous storage volume combined with modular design to allow improvements and adaptation in the future.
-Cross bolt designed to work with improvised tools (such as a quarter) allow for easy adjustment or re-tightening
-Hinged trap door offering storage inside the grip with a water resistant rubber gasket
-Reversible clamps allow user to setup fasteners to reside on either side
-Spring-loaded clamp makes installation and removal easier
-Made in the U.S.A.

Bcm trigger guard mod0 foliage green fits ar-15

FEATURES
-Trigger Guard
-Mod 0
-AR-15
-Foliage Green
-Ergonomically correct shape and contour
-No sharp edges, which enhances shooter's comfort
-Compatible with "duck-billed" grips
-Made of impact resistant polymer
-Made in USA
-Professional installation by a qualified gunsmith is required

Other Features: Compatible with duck-billed grips

Bcm compensator mod 0 5.56 1/2x28 fits ar-15

FEATURES
-Gunfighter Compensator
-Fits AR-15
-Mod 0 5.56 1/2 x 28
-Exterior dimensions consistent with Mil-specs for mounting flash hider mounted suppressors
-Tuned slots and interior cone offer maximum in recoil mitigations, compensation of muzzle-rise, and flash reduction.
-Designed to have much less side blast and noise associated with typical compensators. Makes it perfect for working in teams for CQB. It is a compensator built for the 21st Century Gunfighter.
-Stainless Steel construction for maximum corrosion resistance
-Includes a Crush Washer
-Should be installed by a qualified armorer.

Bcm end plate with qd socket for ar-15

FEATURES
-Gunfighter QD End Plate
-Fits AR15/M16 Receiver
-BCM Receiver end plate with socket for Quick Disconnect (QD) swivel
-Machined from steel, and easily accommodates staking
-Made in the U.S.A.

Other Features: Socket for qd swivel (swivel not included)

Bcm parts kit lower fde for ar-15

FEATURES
-AR15 Enhanced Lower Parts Kit
-Flat Dark Earth
-This kit includes all the Mil-Spec quality components along with some fantastic upgrades including;
-BCM PNT Trigger Assembly
-BCM Pistol Grip, Mod 3
-BCM Enhanced Trigger Guard
-Made in the USA

Bcm parts kit lower black for ar-15

FEATURES
-AR15 Enhanced Lower Parts Kit
-Black
-This kit includes all the Mil-Spec quality components along with some fantastic upgrades including;
-BCM PNT Trigger Assembly
-BCM Pistol Grip, Mod 3
-BCM Enhanced Trigger Guard
-Made in the USA

Bcm mil-spec buffer tube kit w/buffer/spring/hardware

FEATURES
-Mil-Spec Buffer Tube Kit
-W/ Buffer/Spring/Hardware
-Mil-Spec Receiver Extension (6 position)
-Receiver End Plate
-Lock Nut (Castle) M4
-Action Spring Carbine
-Buffer

Other Features: Mil-spec receiver extension (6 position), receiver end plate, lock nut (castle) m4, action spring carbine, buffer

Bcm gas block low profile.750 black steel

FEATURES
-Low profile gas block (steel with set screws)
-.750
-Black steel
-BCM Low Profile Gas Block for AR15, M16, M4, M4A1. Machined of steel, phosphate finish, for .750 barrels.
-Manufactured within very tight Mil-Spec tolerances on all ID's.
-Barrel ID honed after finish per USGI TDP.
-Made by Bravo Company MFG, Inc. with set screw mounting
-Set Screws are Steel 10-32 x 3/16 Knurled Cup Point

Bcm gas block low profile.625 black steel

FEATURES
-Low profile gas block (steel with set screws)
-.625
-Black steel
-BCM Low Profile Gas Block for AR15, M16, M4, M4A1. Machined of steel, phosphate finish, for .625 barrels.
-Manufactured within very tight Mil-Spec tolerances on all ID's.
-Barrel ID honed after finish per USGI TDP.
-Made by Bravo Company MFG, Inc. with set screw mounting
-Set Screws are Steel 10-32 x 3/16 Knurled Cup Point

Bcm charging handle gen2 mod3b large latch for ar15

FEATURES:
-Features internal redesigns to direct the force off of the roll pin & into the body of the charging handle
during support hand only manipulations
-Makes the charging handle stronger & less prone to latch breakage.
-Aluminum

Other Features: Large latch fits ar-15

Bcm compensator mod 1 5.56 1/2x28 fits ar-15

FEATURES
-Gunfighter Compensator
-Fits AR-15
-Mod 1 5.56 1/2 X 28
-Tuned slots and interior cone offer maximum in recoil mitigations, compensation of muzzle-rise, and flash reduction.
-Dual action brake minimizes side pressure and designed to have much less noise associated with typical compensators. Makes it perfect for working in teams for CQB. It is a compensator that is built for the 21st Century Gunfighter.
-Stainless Steel construction for maximum corrosion resistance
-Predrilled hole at the base for permanent installation.
-Includes a Crush Washer
-Should be installed by a qualified armorer.
-Extended version of the BCMGUNFIGHTER MOD 0 - 5.56
-Mount per BATF specs to bring your 14.5 inch barrel over 16 inches (non-NFA)

Bcm angled grip fde fits picatinny rails

FEATURES
-Flat Dark Earth
-Gunfighter Angled Grip
-Fits picatinny 1913 rail version
-Kinesthetic Angled Grip (KAG) is designed to complement modern shooting grips
-Forward rake gives positive retention when using "C-clamp" (thumb over bore) method of handguard support
-Works as a rest for supported firing positions
-Slight angle w/o significant bulk adds just the right amount of relief to the wrist w/o substantially increasing the girth of the handguard
-Small profile is just enough to get repeatable hand positon on weapon forend
-Innovative patent pending attachment method allows for robust clamping and alignment w/ minimal hardware and slender accessory size
-Textured in front and back for positive engagement
-Made in the U.S.A. from high quality, impact resistant polymers

Bcm angled grip foliage green fits picatinny rails

FEATURES
-Foliage green
-Gunfighter Angled Grip
-Fits Picatinny rail version
-Kinesthetic Angled Grip (KAG) is designed to complement modern shooting grips
-Forward rake gives positive retention when using "C-clamp" (thumb over bore) method of handguard support
-Works as a rest for supported firing positions
-Slight angle w/o significant bulk adds just the right amount of relief to the wrist w/o substantially increasing the girth of the handguard
-Small profile is just enough to get repeatable hand positon on weapon forend
-Innovative patent pending attachment method allows for robust clamping and alignment w/ minimal hardware and slender accessory size
-Textured in front and back for positive engagement
-Made in the U.S.A. from high quality, impact resistant polymers

Bcm angled grip black fits picatinny rails

FEATURES
-Black
-Gunfighter Angled Grip
-Fits Picatinny Rail 1913 Rail Version
-Kinesthetic Angled Grip (KAG) is designed to complement modern shooting grips
-Forward rake gives positive retention when using "C-clamp" (thumb over bore) method of handguard support
-Works as a rest for supported firing positions
-Slight angle w/o significant bulk adds just the right amount of relief to the wrist w/o substantially increasing the girth of the handguard
-Small profile is just enough to get repeatable hand positon on weapon forend
-Innovative patent pending attachment method allows for robust clamping and alignment w/ minimal hardware and slender accessory size
-Textured in front and back for positive engagement
-Made in the U.S.A. from high quality, impact resistant polymers

Bcm angled grip black fits keymod rails

FEATURES
-Black
-Gunfighter Angled Fore Grip
-Fits KeyMod rails
-Kinesthetic Angled Grip (KAG) is designed to complement modern shooting grips
-Forward rake gives positive retention when using "C-clamp" (thumb over bore) method of handguard support
-Works as a rest for supported firing positions
-Slight angle w/o significant bulk adds just the right amount of relief to the wrist w/o substantially increasing the girth of the handguard
-Small profile is just enough to get repeatable hand positon on weapon forend
-Innovative patent pending attachment method allows for robust clamping and alignment w/ minimal hardware and slender accessory size
-Textured in front and back for positive engagement
-Made in the U.S.A. from high quality, impact resistant polymers

Bcm angled grip fde fits keymod rails

FEATURES
-Flat Dark Earth
-Gunfighter Angled Grip
-Fits KeyMod Rails
-Kinesthetic Angled Grip (KAG) is designed to complement modern shooting grips
-Forward rake gives positive retention when using "C-clamp" (thumb over bore) method of handguard support
-Works as a rest for supported firing positions
-Slight angle w/o significant bulk adds just the right amount of relief to the wrist w/o substantially increasing the girth of the handguard
-Small profile is just enough to get repeatable hand positon on weapon forend
-Innovative patent pending attachment method allows for robust clamping and alignment w/ minimal hardware and slender accessory size
-Textured in front and back for positive engagement
-Made in the U.S.A. from high quality, impact resistant polymers

Bcm angled grip foliage green fits keymod rails

FEATURES
-Foliage green
-Gunfighter Angled Grip
-Fits KeyMod version
-Kinesthetic Angled Grip (KAG) is designed to complement modern shooting grips
-Forward rake gives positive retention when using "C-clamp" (thumb over bore) method of handguard support
-Works as a rest for supported firing positions
-Slight angle w/o significant bulk adds just the right amount of relief to the wrist w/o substantially increasing the girth of the handguard
-Small profile is just enough to get repeatable hand positon on weapon forend
-Innovative patent pending attachment method allows for robust clamping and alignment w/ minimal hardware and slender accessory size
-Textured in front and back for positive engagement
-Made in the U.S.A. from high quality, impact resistant polymers

Bcm angled grip black fits m-lok rails

FEATURES
-Forward rake gives positive retention when using "C-clamp" method of handguard support
-Works as a rest for supported firing positions
-Slight angle w/out significant bulk adds just the right amount of relief to the wrist w/out substantially
increasing the girth of the handguard
-Small profile is just enough to get repeatable hand position on weapon forend
-Textured in front & back for positive engagement
-Black

Bcm angled grip fde fits m-lok rails

FEATURES
-Forward rake gives positive retention when using "C-clamp" method of handguard support
-Works as a rest for supported firing positions
-Slight angle w/out significant bulk adds just the right amount of relief to the wrist w/out substantially
increasing the girth of the handguard
-Small profile is just enough to get repeatable hand position on weapon forend
-Textured in front & back for positive engagement
-Flat Dark Earth

Bcm rail section alum.Keymod 3" rail section black

FEATURES
-KeyMod Picatinny Aluminum Rail Section
-3"
-Black
-Rail section is made of Hard Anodized Aircraft Aluminum Alloy
-Mounting hardware is made of Corrosion Resistant Stainless Steel
-Made to the Mil-Standard 1913 Picatinny Arsenal Specifications
-Features a Snag resistant design, while retaining Mil-Standards specs
-Self-contained assembly, eliminates the possible loss of mounting hardware
-Fits ALL KeyMod interface mounting surfaces

Bcm rail section alum.Keymod 4" rail section black

FEATURES
-KeyMod Picatinny Aluminum Rail Section
-4"
-Black
-Rail section is made of Hard Anodized Aircraft Aluminum Alloy
-Mounting hardware is made of Corrosion Resistant Stainless Steel
-Made to the Mil-Standard 1913 Picatinny Arsenal Specifications
-Features a Snag resistant design, while retaining Mil-Standards specs
-Self-contained assembly, eliminates the possible loss of mounting hardware
-Fits ALL KeyMod interface mounting surfaces

Bcm rail section alum.Keymod 5.5" rail section black

FEATURES
-KeyMod Picatinny Aluminum Rail Section
-5.5"
-Black
-Rail section is made of Hard Anodized Aircraft Aluminum Alloy
-Mounting hardware is made of Corrosion Resistant Stainless Steel
-Made to the Mil-Standard 1913 Picatinny Arsenal Specifications
-Features a Snag resistant design, while retaining Mil-Standards specs
-Self-contained assembly, eliminates the possible loss of mounting hardware
-Fits ALL KeyMod interface mounting surfaces

Bcm rail section--nylon keymod 3" rail black

FEATURES
-KeyMod Picatinny Nylon Rail Section
-3"
-Black
-Rail section is made of Lightweight Impact Resistant Polymer
-Mounting hardware is made of Corrosion Resistant Stainless Steel
-Made to the Mil-Standard 1913 Picatinny Arsenal Specifications
-Features a Snag resistant design, while retaining Mil-Standards specs
-Self-contained assembly, eliminates the possible loss of mounting hardware
-Fits ALL KeyMod interface mounting surfaces

NOTE: NYLON/POLYMER PICATINNY RAIL SECTIONS ARE FOR NON-LOAD BEARING ACCESSORIES ONLY. ALUMINUM PICATINNY RAIL SECTIONS RECOMMENDED FOR LOAD BEARING. DO NOT EXCEED 20 IN/LBS WHEN SECURING KEYMOD FASTENERS ON POLYMER ACCESSORIES. ALUMINUM PICATINNY RAIL SECTIONS MAY BE TORQUED TO 30 IN/LBS

Bcm rail section--nylon keymod 3" rail fde

FEATURES
-KeyMod Picatinny Nylon Rail Section
-3"
-Flat Dark Earth
-Rail section is made of Lightweight Impact Resistant Polymer
-Mounting hardware is made of Corrosion Resistant Stainless Steel
-Made to the Mil-Standard 1913 Picatinny Arsenal Specifications
-Features a Snag resistant design, while retaining Mil-Standards specs
-Self-contained assembly, eliminates the possible loss of mounting hardware
-Fits ALL KeyMod interface mounting surfaces

NOTE: NYLON/POLYMER PICATINNY RAIL SECTIONS ARE FOR NON-LOAD BEARING ACCESSORIES ONLY. ALUMINUM PICATINNY RAIL SECTIONS RECOMMENDED FOR LOAD BEARING. DO NOT EXCEED 20 IN/LBS WHEN SECURING KEYMOD FASTENERS ON POLYMER ACCESSORIES. ALUMINUM PICATINNY RAIL SECTIONS MAY BE TORQUED TO 30 IN/LBS

Bcm rail section--nylon keymod 4" rail fde

FEATURES
-KeyMod Picatinny Nylon Rail Section
-4"
-Flat Dark Earth
-Rail section is made of Lightweight Impact Resistant Polymer
-Mounting hardware is made of Corrosion Resistant Stainless Steel
-Made to the Mil-Standard 1913 Picatinny Arsenal Specifications
-Features a Snag resistant design, while retaining Mil-Standards specs
-Self-contained assembly, eliminates the possible loss of mounting hardware
-Fits ALL KeyMod interface mounting surfaces

NOTE: NYLON/POLYMER PICATINNY RAIL SECTIONS ARE FOR NON-LOAD BEARING ACCESSORIES ONLY. ALUMINUM PICATINNY RAIL SECTIONS RECOMMENDED FOR LOAD BEARING. DO NOT EXCEED 20 IN/LBS WHEN SECURING KEYMOD FASTENERS ON POLYMER ACCESSORIES. ALUMINUM PICATINNY RAIL SECTIONS MAY BE TORQUED TO 30 IN/LBS

Bcm rail section--nylon keymod 5.5" rail black

FEATURES
-KeyMod Picatinny Nylon Rail Section
-5.5"
-Black
-Rail section is made of Lightweight Impact Resistant Polymer
-Mounting hardware is made of Corrosion Resistant Stainless Steel
-Made to the Mil-Standard 1913 Picatinny Arsenal Specifications
-Features a Snag resistant design, while retaining Mil-Standards specs
-Self-contained assembly, eliminates the possible loss of mounting hardware
-Fits ALL KeyMod interface mounting surfaces

NOTE: NYLON/POLYMER PICATINNY RAIL SECTIONS ARE FOR NON-LOAD BEARING ACCESSORIES ONLY. ALUMINUM PICATINNY RAIL SECTIONS RECOMMENDED FOR LOAD BEARING. DO NOT EXCEED 20 IN/LBS WHEN SECURING KEYMOD FASTENERS ON POLYMER ACCESSORIES. ALUMINUM PICATINNY RAIL SECTIONS MAY BE TORQUED TO 30 IN/LBS

Bcm rail section--nylon keymod 5.5" rail fde

FEATURES
-KeyMod Picatinny Nylon Rail Section
-5.5"
-Flat Dark Earth
-Rail section is made of Lightweight Impact Resistant Polymer
-Mounting hardware is made of Corrosion Resistant Stainless Steel
-Made to the Mil-Standard 1913 Picatinny Arsenal Specifications
-Features a Snag resistant design, while retaining Mil-Standards specs
-Self-contained assembly, eliminates the possible loss of mounting hardware
-Fits ALL KeyMod interface mounting surfaces

NOTE: NYLON/POLYMER PICATINNY RAIL SECTIONS ARE FOR NON-LOAD BEARING ACCESSORIES ONLY. ALUMINUM PICATINNY RAIL SECTIONS RECOMMENDED FOR LOAD BEARING. DO NOT EXCEED 20 IN/LBS WHEN SECURING KEYMOD FASTENERS ON POLYMER ACCESSORIES. ALUMINUM PICATINNY RAIL SECTIONS MAY BE TORQUED TO 30 IN/LBS

Bcm rail alpha 10" keymod black fits ar-15

FEATURES
-KMR Alpha
-10"
-Black
-KeyMod Free Float Handguard
-100% aluminum
-Lightweight and durable. Also featuring a proprietary patent pending mounting, indexing and lock up system that mitigates 12:00 rail movement under heat generated from the barrel nut.
-Handguard alone weighs 6.2 oz
-1.3" Inner Diameter
-1.5" OUTSIDE flat to flat
-Handguard flares forward (towards muzzle end) at the 3 and 9 O'Clock positions approximately 1/4"
-Actual length when measured to flare is 10.5"
-The KMR barrel nut will fit over all mil-spec diameter barrels (max of 1")
-Mounting hardware, 2.4 oz, for a total of 8.6 oz on a 10" rail
-The KMR Alpha is hardcoat anodized for corrosion resistance as well as to maintain a non-reflective finish.
-Includes BCM KeyMod Sling Mount

NOTE: NYLON/POLYMER PICATINNY RAIL SECTIONS ARE FOR NON-LOAD BEARING ACCESSORIES ONLY. ALUMINUM PICATINNY RAIL SECTIONS RECOMMENDED FOR LOAD BEARING. DO NOT EXCEED 20 IN/LBS WHEN SECURING KEYMOD FASTENERS ON POLYMER ACCESSORIES. ALUMINUM PICATINNY RAIL SECTIONS MAY BE TORQUED TO 30 IN/LBS

Other Features: Aluminum alloy

Bcm rail alpha 13" keymod black fits ar-15

FEATURES
-KMR Alpha
-13"
-Black
-KeyMod Free Float Handguard
-100% aluminum
-Lightweight and durable. Also featuring a proprietary patent pending mounting, indexing and lock up system that mitigates 12:00 rail movement under heat generated from the barrel nut.
-Handguard alone weighs 7.8 oz
-1.3" Inner Diameter
-1.5" OUTSIDE flat to flat
-Handguard flares forward (towards muzzle end) at the 3 and 9 O'Clock positions approximately 1/4"
-Actual length when measured to flare is 13.4"
-The KMR barrel nut will fit over all mil-spec diameter barrels (max of 1")
-Mounting hardware, 2.4 oz, for a total of 10.2 oz on a very long 13" rail
-The KMR Alpha is hardcoat anodized for corrosion resistance as well as to maintain a non-reflective finish.
-Includes BCM KeyMod Sling Mount

NOTE: NYLON/POLYMER PICATINNY RAIL SECTIONS ARE FOR NON-LOAD BEARING ACCESSORIES ONLY. ALUMINUM PICATINNY RAIL SECTIONS RECOMMENDED FOR LOAD BEARING. DO NOT EXCEED 20 IN/LBS WHEN SECURING KEYMOD FASTENERS ON POLYMER ACCESSORIES. ALUMINUM PICATINNY RAIL SECTIONS MAY BE TORQUED TO 30 IN/LBS

Other Features: Aluminum alloy