Advanced Tech

Adv.Tech.Stock for mosin nagant sporter style black syn

FEATURES
-Monte Carlo Rifle Stock with Checkered Forearm & Grip
-Easy drop-in installation
-Constructed of DuPont® extreme reinforced polymer
-Scorpion recoil pad
-Raised cheekrest
-Two sling swivel studs

Fits:
-Most 91/30 rifles & M-38, M-44 carbines & Mosin Nagant variants 7.62x54R

Note: Will NOT fit firearms with a hex receiver, some minor modification may be required

Other Features: Fits all models of mosin nagant rifles and carbines no gunsmithing length of pull 13.5" rubber butt pad and studs

Adv.Tech.Ruger mini-14/30 strikeforce stock w/recoil sys

FEATURES
-Black
-TactLite 6-position adjustable stock
-Side-folds to the left of the receiver
-Can be fired from folded position
-TracLOCK System
-Dual sided QD attachment point
-Removable/adjustable cheekrest system
-X series thin recoil pad
-X1 style pistol grip
-4 forward Picatinny rail locations
-One 7" Picatinny toprail
-Two 2" Picatinny rails
-One 2" swivel stud Picatinny rail
-Blank covers for unused rail locations
-Additional ventilation in forend & top cover
-Slot for tactical sling attachment
-2 sling swivel studs
-All mounting hardware included
-DuPont® extreme temperature glass reinforced polymer

Fits:
-All Ruger Mini-14 Rifles with a Serial # 181 & above
-All Ruger Mini Thirty Rifles (Must remove small amount of material around the mag-well)

Other Features: 6 position collapsible and side folding stock scorpion recoil system scorpion razorback recoil pad scorpion recoil pistol grip 1- 7" picatinny top rail 2- 2" picatinny rails 1- 2" picatinny w/ swivel stud removable/adjustable cheekrest

Adv.Tech.Sks strikeforce stock w/x series recoil system

FEATURES
-Black
-TactLite 6-position adjustable stock
-Side-folds to the left of the receiver
-Can be fired from folded position
-TracLOCK System
-Dual sided QD attachment point
-Removable/adjustable cheekrest system
-X series thin recoil pad
-X1 style pistol grip
-4 forward Picatinny rail locations
-One 4" Picatinny rail
-Three 2" Picatinny rails
-One 2" swivel stud Picatinny rail
-Blank covers for unused rail locations
-Additional ventilation in forend & top cover
-Slot for tactical sling attachment
-2 sling swivel studs
-All mounting hardware included
-DuPont® extreme temperature glass reinforced polymer

Fits:
-SKS Rifles (Minor modification may be required in some cases. Blade bayonet must be removed.)

Note: SKS Scope Mount not included.

Other Features: 6 position collapsible and side folding stock x series recoil system x series thin recoil pad x1 style pistol grip 1- 4" picatinny top rail 3- 2" picatinny rails 1- 2" picatinny w/ swivel stud removable/adjustable cheekrest

Adv.Tech.Ak-47 strikeforce stock w/scorpion recoil system

FEATURES
-Black
-TactLite 6-position adjustable side-folding stock
-Can be fired from folded position
-TracLOCK System
-Dual sided QD attachment point
-Scorpion recoil system
-Scorpion Razorback recoil pad
-Scorpion recoil pistol grip
-Ergonomic, textured & ventilated upper & lower handguards
-4 Picatinny rails
-One 4" Picatinny toprail
-Two 2" Picatinny rails
-One 2" Picatinny rail with swivel stud
-Blank inserts for when rails are not in use
-Additional ventilation in forend & top cover
-Slot for tactical sling attachment
-3 sling swivel studs
-Includes steel T-nut & bolt
-DuPont® extreme temperature glass reinforced polymer

Fits:
-Most stamped receivers. Will NOT fit milled receivers.

*Will NOT fit the O-PAP/N-PAP M-70. (The M-70 has a stamped receiver, but utilizes a different principle of attaching the stock & the gas piston is longer than a standard AK.)

*ATI AK-47 stocks are NOT compatible with any AK-47 that has an under-folding stock or was originally designed to have an under-folding stock like the NMH-90, etc.

Other Features: 6 position collapsible and side folding stock scorpion recoil system scorpion razorback recoil pad scorpion recoil pistol grip 1- 4" picatinny top rail 2- 2" picatinny rails 1- 2" picatinny w/ swivel stud removable/adjustable cheekrest

Adv.Tech.Ruger ar22 stock system w/ 6 sided forend

FEATURES
-AR-22 Stock Conversion Kit
-AR-15 replicate polymer receiver chassis
-Accepts any 10-25 round magazine
-6-sided military grade synthetic forend
-21" aluminum Picatinny top rail for optics & accessories
-Military grade synthetic handguard nose cone
-TactLite 6-position adjustable stock
-Dual sided QD attachment point
-TracLock System
-X series thin recoil pad
-X2 style pistol grip

Fits:
-Most Ruger 10/22 with standard barrel or bull barrel

Other Features: 6 position collapsible stock & removable/ajustable cheekrest mock charging handle mock forward assist t2 style pistol grip 21" low profile picatinny rail six-sided aluminum forend scorpion razor recoil pad

Adv.Tech.Ruger 10/22 strike force stock destroyer gray

FEATURES
-Destroyer Gray
-TactLite 6-position adjustable stock
-Side-folds to the left of the receiver
-Can be fired from folded position
-TracLOCK System
-Dual sided QD attachment point
-Removable/adjustable cheekrest system
-X series thin recoil pad
-X1 style pistol grip
-4 forward Picatinny rail locations
-One 4" Picatinny rail
-Three 2" Picatinny rails
-One 2" swivel stud Picatinny rail
-Blank covers for unused rail locations
-Additional ventilation in forend & top cover
-Slot for tactical sling attachment
-2 sling swivel studs
-All mounting hardware included
-DuPont® extreme temperature glass reinforced polymer

Fits:
-Most Ruger 10/22 Rifles (Will NOT accommodate rifles equipped with bull barrels)

Other Features: 6 position collapsible and side folding stock x series recoil system x series thin recoil pad x1 style pistol grip 1- 4" picatinny rail 3- 2" picatinny rails 1- 2" picatinny w/ swivel stud removable/adjustable cheekrest

Adv.Tech.Ak-47 strikeforce stock system in destroyer gray

FEATURES
-Destroyer Gray
-TactLite 6-position adjustable side-folding stock
-Can be fired from folded position
-TracLOCK System
-Dual sided QD attachment point
-Scorpion recoil system
-Scorpion Razorback recoil pad
-Scorpion recoil pistol grip
-Ergonomic, textured & ventilated upper & lower handguards
-4 Picatinny rails
-One 4" Picatinny toprail
-Two 2" Picatinny rails
-One 2" Picatinny rail with swivel stud
-Blank inserts for when rails are not in use
-Additional ventilation in forend & top cover
-Slot for tactical sling attachment
-3 sling swivel studs
-Includes steel T-nut & bolt
-DuPont® extreme temperature glass reinforced polymer

Fits:
-Most stamped receivers. Will NOT fit milled receivers.

*Will NOT fit the O-PAP/N-PAP M-70. (The M-70 has a stamped receiver, but utilizes a different principle of attaching the stock & the gas piston is longer than a standard AK.)

*ATI AK-47 stocks are NOT compatible with any AK-47 that has an under-folding stock or was originally designed to have an under-folding stock like the NMH-90, etc.

Other Features: 6 position collapsible and side folding stock scorpion recoil system scorpion razorback recoil pad scorpion recoil pistol grip 1- 4" picatinny top rail 2- 2" picatinny rails 1- 2" picatinny w/ swivel stud removable/adjustable cheekrest

Adv.Tech.Military buffer tube assembly
Other Features: Includes: ar-15 recoil plug and buffer spring, steel mil-grade e-coated castle nut locking ring mil-spec buffer tube

Adv.Tech.Gas block micro.750 low profile

FEATURES
-Designed to allow an extended handguard to cover the gas return area of the barrel
-Machined from steel
-Black Nitride finish
-Limited Lifetime warranty

Other Features: Matte black nitride finish includes 2 set screws to hold the block in place

Adv.Tech.T3 shotgun stock mbergremwin 12ga.Pumps blk
Other Features: Collapsible, six position stock pistol grip and buttpad.Fits: mossberg 500/590/835, rem 870, winchester 1200/1300, sxp, fnh p-12 mavrick 88

Adv.Tech.Bipod for sks featherweight black nylon

FEATURES
-Mounts to bayonet lug
-Push "Snap-N-Lock" button to fold legs forward, rearward or downward
-Fixed bipod
-Easily adjusts from 9" to 13"
-Weighs only 6 oz.
-Non-slip rubber feet
-Will not scratch, rust or dent
-Hardware included
-Weatherproof
-DuPont® extreme temperature glass reinforced polymer

Fits:
-All SKS Rifles

Other Features: Non-swivel bipod mounts to bayonet lug no gunsmithing

Adv.Tech.Stock for enfield post 1914 black synthetic

FEATURES
-Two sling swivel studs
-Raised cheekrest
-Checkered grip & forearm
-Scratch resistant
-Easy drop-in installation
-DuPont® extreme temperature glass reinforced polymer

Fits:
-Most .303/.308 Enfield No. 4, Mk 1, Mk 2, Mk 5 Rifles

Other Features: No gunsmithing fits.303 enfield no4, mk1, or mk5 post 1914 manufacture sling swivel studs & rubber butt plate

Adv.Tech.Stock shotgun 12ga.Pumps top folding black syn

FEATURES
-Top-Folding Shotgun Stock
-Compact for Transport & Carry
-Can be Fired in Opened or Folded Position
-Quick Release Button Allows Stock to Lock in Folded/Unfolded Position
-Textured Pistol Grip
-Ambidextrous
-Pre-Drilled to Accept Shotgun Shell Holder
-Easy Installation
-Mounts for All Supported Models Included
-Sling Swivel Stud Included
-DuPont® Extreme Reinforced Polymer
-Made in the USA

Fits: Most 12 GA Maverick 88, Mossberg 500/535/590/835, Remington 870 and Winchester 1200/1300 Shotguns

Note:Sling Swivel Studs Accepts ATI's Sling Swivel (Part # A.5.10.2506) or any Standard Sling Swivel. Some minor modifications may be required.

Other Features: Folding stock with pistol grip fits 12ga.Mberg, rem 870, win 1200/1300 pumps

Adv.Tech.Ak fiberforce stock black matte

FEATURES
-Thumbhole Grip Rifle Stock
-Dragunov/Military style
-Built-in cheekrest
-Matching ventilated handguards
-Dowel sling mount
-Ambidextrous
-DuPont® extreme temperature glass reinforced polymer

Fits:
-Most stamped & milled AK receivers like the WASR, MAK-90, Maadi, etc.

*NOT compatible with the MAK-9

Other Features: Dowel sling mount fits most ak, mak-90 and maadi no gunsmithing simple drop-in installation handguard included handguard included made in usa will not fit siaga some romanian ak handguards may requir modification

Adv.Tech.Stock ruger 10/22 standard barrel black syn

FEATURES
-Thumbhole Grip Stock
-Dragunov/Military design
-Lightweight - Weighs only 26 oz.!
-Easy drop-in installation
-Ventilated forearm & handguard
-Built-in cheekrest
-Sling swivel studs
-Dowel sling mount
-Scratch resistant
-Weatherproof
-DuPont® extreme temperature glass reinforced polymer

Fits:
-Most Ruger 10/22, will not accommodate rifles equipped with bull barrels

Other Features: Fits 10/22 standard barrel handguard included no gunsmithing sling swivel studs included

Adv.Tech.Heatshield deluxe shotforce w/sights black syn

FEATURES
-Steel Formed Shotgun Heatshield
-Elongated Cooling Slots for Maximum Dissipation of Heat
-Easy Installation - Simply Slide Over Barrel and Secure With Supplied Hardware
-AR-15 Style Fixed Nylon Ghost Ring Sights
-13-1/2" Long
-Manufactured in the USA

Fits: Most 12, 16 and 20 Ga and .410 pump shotgun barrels. Heatshields should not be used on Mossberg Mariner or Remington Marine Coat Shotguns

Note:Each Heatsheild should be custom fit. If you do not have the proper tools or do not feel comfortable fitting the heatshield to your firearm please enlist the services of your local gunsmith.

Other Features: Deluxe heatshield with ghost ring sights no gunsmithing

Adv.Tech.Forend/pistol grip most 12ga.Pumps black syn

FEATURES
-Shotforce Forend Pistol Grip
-Slim Ergonomic Design for Comfort
-Textured 2-Finger Grip for Increased Control & Accuracy
-Easy Installation
-Adapters for All Supported Models Included
-DuPont^® Extreme Temperature Glass Reinforced Polymer
-Made in the USA

Fits: Most 12 GA Mossberg* 500/535/590/835, Remington 870 and Winchester 1200/1300/SXP Shotguns

Fits Note: The following are required for use of this product: (1) Mossberg/Maverick Shotguns with 6 ¾” slide action tube and removable forend. (2) Winchester forend tubes with a minimum length of 6 ¼ Inches.

Other Features: Fits: 12ga.Mossberg 500/590, remington 870, norinco 98, winchester 1200/1300 includes adapters

Adv.Tech.Forend standard for most 12ga.Pumps black syn

FEATURES
-No jamming!
-Designed not to overlap the shotgun's receiver when cycling the pump action
-Easy removal and installation
-DuPont® extreme temperature glass reinforced polymer
-Manufactured in the USA

Other Features: Designed not to overlap the shotguns reciever when cycling fits: 12ga.Mossberg 500/590 remington 870, winchester 1200 norinco 98; adapters included

Adv.Tech.12 ga.Shotshell holder 5-rounds

FEATURES
-Quick & Easy Access to Extra 12 Ga Rounds
-Holds Five Rounds
-DuPont^® Extreme Temperature Glass Reinforced Polymer
-Manufactured in the USA

Fits: Any ATI Top Folding or Full Length Wood or Synthetic Stocks

Adv.Tech.Heatshield standard shotguns black steel

FEATURES
-Steel Formed Shotgun Heatshield
-Elongated Cooling Slots for Maximum Dissipation of Heat
-Easy Installation - Simply Slide Over Barrel and Secure With Supplied Hardware
-13-1/2" Long
-Manufactured in the USA

Fits: Most 12, 16 and 20 Ga and .410 pump shotgun barrels. Heatshields should not be used on Mossberg Mariner or Remington Marine Coat Shotguns.

Note:Each Heatsheild should be custom fit. If you do not have the proper tools or do not feel comfortable fitting the heatshield to your firearm please enlist the services of your local gunsmith.

Other Features: Easily adapts to fit most 12ga 16ga, 20ga, &.410 shotguns slide over barrel and secure w/included screws heatshields should not be used on mossberg mariner or remington marine coat shotguns

Adv.Tech.Stock for sks rifle monte carlo black synthetic

FEATURES
-Monte Carlo Style Rifle Stock
-Checkered grip & forend
-Raised cheekpiece
-X Series recoil reducing buttpad
-Easy drop-in installation - No gunsmithing required
-Sling swivel stud sling attachment
-Scratch resistant
-Weatherproof
-DuPont® extreme temperature glass reinforced polymer

Fits:
-All SKS Rifles

Note: Some minor modification may be required (blade bayonet must be removed to install stock)

Other Features: Monte carlo cheekpiece rubber recoil pad no gunsmithing swivel studs included

Adv.Tech.Stock for sks rifle fiberforce style black syn

FEATURES
-Thumbhole Grip Rifle Stock
-Dragunov/Military design
-Ventilated forearm
-Dowel sling mount
-Improved secure cheekrest locking bolt
-Ambidextrous
-DuPont® extreme temperature glass reinforced polymer

Fits:
-Most SKS Rifles

Note: Blade bayonet must be removed for installation of ATI stock

Some minor modification may be required. SKS Scope Mount sold separately.

Other Features: No gunsmithing dragunov-style design drop-in installation handguard and ventilated f'end adjustable cheekrest

Adv.Tech.Buttstock w/pistol grip most pumps black syn

FEATURES
-Shotforce Pistol Grip Style Shotgun Stock
-Slim Ergonomic Design
-Length of Pull: 14"
-Non-Slip Pistol Grip Texture
-Increased Control &Accuracy
-X Series Reducing Butt-Pad
-Reduces Fatigue When Shooting Slugs and Turkey Loads
-Easy Installation
-Includes Adapters for All Supported Models
-Uses Factory Stock Bolt
-Swivel Stud Sling Attachment
-Scratchproof & Weatherproof
-DuPont^® Extreme Temperature Glass Reinforced Polymer
-Made in the USA

Fits:
-Most Maverick 88, Mossberg 500/535/590/835, Remington 870, & Winchester 1200/1300 12 GA shotguns

Other Features: Fits: 12ga.Mossberg 500/590, remington 870, norinco 98, winchester 1200/1300 includes adapters

Adv.Tech.Pistol grip kit for most pumps black syn

FEATURES
-Shotforce Rear Pistol Grip
-AR-Style Pistol Grip
-Slim Ergonomic Design for Comfort
-Textured Grip for Increased Control & Accuracy
-Top-Mounted Sling Loop
-Easy Installation
-Includes Adapters for All Supported Models
-Includes All Mounting Hardware
-DuPont^® Extreme Temperature Glass Reinforced Polymer
-Made in the USA

Fits: Most 12 GA Mossberg 500/535/590/835, Maverick 88, Remington 870 and Winchester 1200/1300 Shotguns

Other Features: Fits: 12ga.Mossberg 500/590, remington 870, norinco 98, winchester 1200/1300 includes adapters